Good Morning, fella's - I am removing a HDS 5 from my console and am looking for a faceplate of some type that will cover the hole insert. Any idea's on where to locate a filler plate?
Thanks
Good Morning, fella's - I am removing a HDS 5 from my console and am looking for a faceplate of some type that will cover the hole insert. Any idea's on where to locate a filler plate?
Thanks
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
Brian Walters
2012 ZX21
2012 Yamaha 250 SHO
25 T1 and 26 Tempest Plus
Helix Mega G3N, Mega 360, Ultrex 112
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
Brian Walters
2012 ZX21
2012 Yamaha 250 SHO
25 T1 and 26 Tempest Plus
Helix Mega G3N, Mega 360, Ultrex 112
Brian did you ever get a plate made for the old center graph area. I have a 901cd looking to put a plate in then make a 3 3/8 hole for a smart craft gauge. All my other gauges are the oversized faria style.
I don't have a picture available, but I got some plexiglass from Home depot, cut it to size (LEAVE THE FILM ON UNTIL INSTALLATION) and sanded the edges smooth. Once I got it looking really clean and "Professional" I painted the BACK side with high gloss black spray paint. When the film is removed from the glossy side, it looks like a million bucks. The paint on the back side makes the finish look very deep and clean!