On my 2001 triton tr21 my windshields have the plastic spring loaded wing nuts I have a few that won't stay latched and windshield is loose. I took it off boat to try and buy some bolts to try and just bolt it on but the hole is very big. My question is has any one ever modded there windshield so they could just bolt on and if so how? Or if any one has any kind of ideas on what to do that would be great Thanks..
If I was trying to do that I would use some ss button head bolts with rubber washers on each side.
try C and O Marine, you probably need new attachment pins. They may have them.
I would get new twist locks if it were me.
Yea I thought about trying to find new twist locks but kinda wanted a more sturdy/permanent way to attach.
bigwill on the ss button head bolts are you talking about the ones they make for trolling motor when u tighten them down the tuner sinches up to the hole?
The thing I'm thinking of is a well nut
C&O has them bought them for 01 TR-21Originally Posted by Dmerr00
Steven Dendy-Spring Hill, KS
2017 Phoenix 721 PRO XP 250-PRO XS
Past Rides
07 Triton - TR-196 200-Opti
01 Triton - TR-21 225 HO Johnson
93 Javelin 379T 91 Rude Intruder
83 Tidecraft - Wildfire F/S 150 Black Max
You know what the correct name is for them?
Academy carries the replacement assemblies. That's where I got mine.
2020 Caymas CX21 Pro
Mercury 250 Pro XS
Serial# 2B686100
Do the academy ones looks like that?
Following
Done.
http://www.teamcandomarine.com/eshop...ipHardware.htm I found them and c&o is actually cheaper then Amazon.
Reply With Quote