Torsion arm for EZ Loader.

[Neilslure]

I have a 2008 EZ Loader tandem trailer for a 21ft Skeeter. I have a torsion arm that is loose on the axle causing my tire to camber out and wear excessively on the inside, evidently it is worn out as tightening the bolt doesnt help. I had the one on the opposite side wear out several years ago to the point it was spinning on the splines, it was replaced under warranty along with the axle (my 3rd one). EZ Loader sells them through their website they have a 3750 lb and 5200 lb, which would be correct for my trailer? Anywhere that might sell that same torsion arm assembly for less?

[EasternMarine]

I think this is the EZLoader axle you are referring to but you should verify the bracket center(70.25") and hub face (87.38"). Unfortunately, the spindles are not replaceable. If the trailer is an EZ Loader Custom, this is not the correct axle.

http://www.easternmarine.com/2-squar...-300-023524-10

[Neilslure]

I am looking at a trailing arm and hub assembly without brakes, yes my trailer is a custom.

[EasternMarine]

If you have 5 lugs, Eastern Marine offers this: with a Vault hub

http://www.easternmarine.com/ufp-3-7...assembly-43038

[billnorman1]

^^^ if his torsion arm bushing was worn out, this wouldn't help, would it?^^^

[EasternMarine]

I hope his bushing is not worn out

[DABS]

Neil, call me tomorrow and we will discuss it. 931-967-5101 x 16

[Neilslure]

Neil, call me tomorrow and we will discuss it. 931-967-5101 x 16

Lost track of this thread over the past few weeks... I will call you tomorrow.

[Ted1967]

I'm having same issue with an EZ Loader trailer. I'm not able to keep torsion arm tight. Would the post above be the best fix.
If you have 5 lugs, Eastern Marine offers this: with a Vault hub

http://www.easternmarine.com/ufp-3-7...assembly-43038

[Ted1967]

I'm having the issue with EZ Loader on 2014 Skeeter FX21. Loose spindle arm, how did the above UFP work out for your problem.