Amazing work Chris man those are sharp.
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
i make them to fit the 90hp and above mercs now.
Really nice work! How do they attach? Do you have to drill holes in the bottom fin to install?
2014 Ranger RT188
Mercury Fourstroke
The mercury one is awesome looking. How does it perform, and what are your prices.
you drill 6 holes in cavitation plate. very easy to do. use the foil as a temp let, hold it in place, center it up and mark your holes and drill. i also have stainless mounting kits for the guys that dont want to provide their own.
the foil will do 3 things. helps holeshot. the bow wont come up like your used to with a foil. it also allows you to run slower and still stay on the pad before the bow starts bouncing. it also will save a lower unit or cowling in the event you ever sling a blade.
awesome!
prices are
100 tyd plain raw finish aluminum
125 tyd for raw finish aluminum with logos
150 tyd for mirrored stainless steel with logos
add 30 for colored backing plates of your color choice on either foil.
add 15 for predrilled and stainless steel hardware on any foil
add 10 for primer etching and paint on the aluminum foils
i take cashiers checks/money order or paypal. add 3% for paypal. best way to contact me is email although i check my pm inbox often.
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
Any pics installed ?
2005 Stratos 201 Pro XL
2020 Mercury 250 Pro XS
HB Solix
HB M360
Garmin LiveView
MinnKota Ultrex
Pretty sweet looking. I like how these are not huge and intrusive. Those whale tail types are just flat out ugly.
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
I like it but not sure I could get myself to drill the cavitation plate to mount one.
Great looking foil. I sent you pm
You have just made one of the most hideous contraptions for an outboard look sharp! Nice job
Lol, I agree. Nothing like a big goofy plastic whale tail hanging off the back of your motor! Lol