Thread: foils for sale

Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 58
  1. Member lil red 02's Avatar
    Join Date
    Apr 2013
    Location
    Sanford, Fl
    Posts
    3,796
    #21
    Dont mind the dirty LU, and 1 piece of advice pay for the holes.... It was a major PIA drilling the holes unless you have a drill press. Great foil and looks awesome




    Great attn to detail.....now take the pic of mine off there so nobody else gets that kind
    Also when I pull the boat out I will take some better pics. But yall get the idea

  2. Member
    Join Date
    Oct 2009
    Location
    falls of rough, KY
    Posts
    34
    #22
    will they affect top speed ?

  3. BBC SPONSOR cbailey's Avatar
    Join Date
    May 2013
    Location
    north louisiana
    Posts
    7,418
    #23
    the cut out wings in foil eliminates the speed loss. the fastest ive been was with a foil. i have not had anyone tell me they lost speed.

  4. Member lil red 02's Avatar
    Join Date
    Apr 2013
    Location
    Sanford, Fl
    Posts
    3,796
    #24
    Hopefully I will be school bass fishing on Thursday so I will report back then...


  5. Member
    Join Date
    Jun 2011
    Location
    Lincoln
    Posts
    1,144
    #25
    Clear your pm box. It's full
    -----------------------------------------------------------------------
    2006 Ranger 521 svx
    2006 Evinrude Etec E225DHLSDF #05135216

    (Dads)
    1995 Champion 202
    1997 Johnson Venom 200STLEUB SN# G04338914 Built 4/97

  6. BBC SPONSOR cbailey's Avatar
    Join Date
    May 2013
    Location
    north louisiana
    Posts
    7,418
    #26
    i just did. i sent you a pm also.

  7. Member mattfish11's Avatar
    Join Date
    Mar 2010
    Location
    Somerset Co, NJ
    Posts
    640
    #27
    Do you have foils for the new Merc 2.1L 75-115HP Fourstrokes?
    2003 Bass Tracker 175PT with a 75HP Mercury 4stroke EFI.


  8. BBC SPONSOR cbailey's Avatar
    Join Date
    May 2013
    Location
    north louisiana
    Posts
    7,418
    #28
    yes sir i do.

  9. Member
    Join Date
    Jan 2008
    Location
    houston
    Posts
    79
    #29
    Any pics of the raw finish?

  10. BBC SPONSOR cbailey's Avatar
    Join Date
    May 2013
    Location
    north louisiana
    Posts
    7,418
    #30

  11. Member totalbeverage's Avatar
    Join Date
    Aug 2007
    Location
    Piedmont, OK
    Posts
    1,721
    #31
    Got mine installed, these are nice foils!
    [HTML]/HTML]
    [HTML]/HTML]
    [HTML]/HTML]



  12. Iowa/Wisconsin/Hunting & Gun Lodge/Stroker Moderator Wags's Avatar
    Join Date
    Jun 2004
    Location
    Iowa
    Posts
    12,696
    #32
    Looks good...
    LeaLea

    Hi performance parts or a Yamaha power head visit
    Hydro-Tec's web site @ http://www.yamaha-rebuild.com/

    Kurt's Performance Boats and Props on Facebook.

    Dave Romanus http://calcoastfishing.com/

    CB Marine Designs cbailey2789@gmail.com

  13. Member
    Join Date
    May 2015
    Location
    Lexington KY
    Posts
    1
    #33
    Do you make these for Etec?

  14. BBC SPONSOR cbailey's Avatar
    Join Date
    May 2013
    Location
    north louisiana
    Posts
    7,418
    #34
    yes sir i do

  15. Member
    Join Date
    Apr 2015
    Location
    VA
    Posts
    90
    #35
    Will these help with holeshot? Have customers reported back that it helped?
    Last edited by Voodoo; 07-03-2016 at 05:34 PM.

  16. BBC SPONSOR cbailey's Avatar
    Join Date
    May 2013
    Location
    north louisiana
    Posts
    7,418
    #36
    Yes sir it does. Most everyone has seen an improvement. It's gonna depend on current Holeshot as to how much it helps. They also help with slow speed planning.

  17. Member Sooner496's Avatar
    Join Date
    Nov 2010
    Location
    Oklahoma City
    Posts
    1,885
    #37
    I'm telling you guys if your struggling with a holeshot, Mr. Baileys plate is a great investment! Wished I would had it last November when I threw a blade that destroyed the gear case housing, the lower cowling, and beat the crap out of a power pole, I think the plate would have prevented a lot of that. As far as cruising at slow speeds, was pulling two little girls on a tube this last weekend and could go as slow as 18 mph.

  18. BBC SPONSOR cbailey's Avatar
    Join Date
    May 2013
    Location
    north louisiana
    Posts
    7,418
    #38
    yes sir it would have and a foil is alot cheaper to replace also. thats one of the reasons i run one. thanks for the feed back too.



    Quote Originally Posted by Sooner496 View Post
    I'm telling you guys if your struggling with a holeshot, Mr. Baileys plate is a great investment! Wished I would had it last November when I threw a blade that destroyed the gear case housing, the lower cowling, and beat the crap out of a power pole, I think the plate would have prevented a lot of that. As far as cruising at slow speeds, was pulling two little girls on a tube this last weekend and could go as slow as 18 mph.

  19. Member
    Join Date
    Sep 2009
    Location
    Lawrenceburg, Ky
    Posts
    2,009
    #39
    Quote Originally Posted by Sooner496 View Post
    I'm telling you guys if your struggling with a holeshot, Mr. Baileys plate is a great investment! Wished I would had it last November when I threw a blade that destroyed the gear case housing, the lower cowling, and beat the crap out of a power pole, I think the plate would have prevented a lot of that. As far as cruising at slow speeds, was pulling two little girls on a tube this last weekend and could go as slow as 18 mph.
    I can go 10-12 but boy she burns a lot of gas and seeing over the front?????? well forget that.



  20. Georgia Fishing Reports Moderator
    Join Date
    Jun 2004
    Location
    Rincon
    Posts
    10,057
    #40
    What about one for a '97 Merc EFI?

Page 2 of 3 FirstFirst 123 LastLast