Re: 2013 20XS w/250 ProXS & 24V Motorguide
I have a Lowrance 9" touch in the bow and a 12" touch in the dash as well as a Dekka 31 AGM battery installed. What I'm now looking for is a jump start switch whereby I can switch over from the cranking battery and utilize the trolling motor batteries to jump start the engine. I have found one at TournamentSaverPro.com but really would prefer not to run a cable to the dash and drill a hole in the dash for the push button switch. There's also a Perko switch that may work as well, but I like the idea of the clean installation of the Ranger switch.
Now to my questions.............................below is the website picture of the switch that Ranger has been installing in their C series boats apparently since about 2013.
http://www.boattest.com/images-galle...h_2016_big.jpg
Has anyone mounted one of the Ranger switches in a 20XS triton to know that the corners of the Ranger and the Triton lockers are the same so that the switch will physically bolt up in the rear starboard corner of the bilge locker on the Triton? Secondly, are the wires provided with the Ranger switch the same ones that I will need for my Triton?
PS.....Triton says they do not offer this as a factory installed option or available as an accessory. Seems somewhat strange to me that Ranger has been installing it for some three years now and Triton doesn't........