Thinking it maybe pinging off jackplate, ill snap a picture.
You have your transducer on the starboard side of the jackplate. Those lines are echos from the inside of the port side of the jackplate.
Put a cover or holeshot plate on the bottom of the jackplate to eliminate it.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
So no reason to move the transducer?
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
I am trying to find a holeshot plate. I have a 6in Pro-Hijacker, all i can find is one for the atlas????
Any ideas? Have some one make one?
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
call t&h marine an ask. maybe they have one like this?
http://www.amazon.com/Marine-JPHSP6H.../dp/B000221H9Y
So is it just a plate that covers the underneath opening of the jackplate? And do you just drill new holes to mount it??
Last edited by joshjona; 01-31-2016 at 11:17 PM.
99 Skeeter ZX185c
99 VMAX 150
yes and yes. heres mine on my atlas. im using a TSS and wedge
I kept mine simple. Piece of aluminum bent to 90 degrees bolted to the holeshot plate and SI transducer mounted to aluminum.
2006 Triton TR-21 XD, Mercury 225 Pro XS, S/N 1B287870
Think I would be able to keep mine mounted where it is once I got a plate installed?
99 Skeeter ZX185c
99 VMAX 150
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL