Are helix power cables interchangeable with 1199 and 999 units?
i have 1199 cable run to battery and wondered if I could use it for helix.
Are helix power cables interchangeable with 1199 and 999 units?
i have 1199 cable run to battery and wondered if I could use it for helix.
Yes, same power cord
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Ok so I just networked a helix 7 g2n sonar gps at the bow. A helix 10 gen1 SI and a helix 10 g2n sonar gps at the console. They are networked together with the 5 port hub. I have a 2d transducer and the gen1 si transducer joined with the Y cable. I have sonar on all the units but no di or si on any of them. I don't even have the di screen. I have the si screen but not working properly. Not sure what to turn on to get di and si. Thanks.
You should have SI on the SI unit .... The others won't have SI unless you select the SI unit imaging transducer in the network source menu.
Try resetting defaults on the SI unit.
__________________________________________________ ___
**Looking for the one that makes it all worthwhile**
__________________________________________________ ___
Units ..... 1197 (6.310) ...1198 (6.490) ... Helix 12 MSI G3N
+1 Make sure they all have latest software
Wes
Helix 10 MSI+,MDI+,Ultrex IPilot
2023 Phoenix 818
Never assume there's a tomorrow
whats the best settings to have these set at.... im new to all of this and have about tried everything
thanks
I have si on all the helix units. Just fuzzy. But I have no di on any of the units. Says the screens are visible but I have no di screen
I have helix 12 mega si unit on the way, getting transducer shield mount for jackplate. Can anyone tell me what model transducer comes with the unit for transom mount
XM 9 20 MSI T
Do you know I hole pattern is same on the mount for the mega transducer as it was on the SI tranducer. The holes are already drilled in the boat why not use them.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Good morning, I have a boat Ranger Z518 and a humminbird Helix 10 DI, where is the best place to mount the transducer aft?
Thank you and forgive me for my english
--RANGER 2017 Z 518 + MERC 150 4S---
I sure hope the HD transducer gives a better picture than the standard one. Mine just came in today. Incidentally the best price was on Amazon.
I recently bought a Helix 9 and I owned a Ram Mount with a 1" ball. My partner questioned the weight of the unit and the small ball. One of the MAJOR outlets told me that's what they sell but when I called Humminbird they recommended a Ram with a 2 1/2" ball or one of the hefty swing out mounts such as RAM-109HU. .that one looks good and stout and is rated to carry 10 lbs while the Helic 9 weighs in at 4.5 lbs.
Just a heads up!
This Helix mega si unit is a lot clearer than the 1199 HD. Can you customize a view for chart, DI, SI? It is not option on view tab.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
True that you can not build custom views like the SOLIX. But there are quite a few combinations programmed so almost every combo is covered (though a few I would like are not). But from those pre-programmed views, you can customize the viewable percentage that is displayed. For example, if you choose the sonar/Map combo view, you can set the sonar window to take up 40% of the screen (then the map will be 60%) or other percentages. Not full customization from the sense that you program what windows you show on one view, but at least the pre-programmed views are a little customizable. Helps a bit.
I just ordered the new Helix 12 mega. I currently have an 1199 at the console with a 998 at the bow. The 998 transducer is mounted on the terrova. I am putting the new Helix 12 at the console and moving the 1199 to the bow. Do I also need a new adapter cable for the Helix 12 to Ethernet link? I know the 1199 currently has one but didn't know if they were the same.
Also I currently have a transducer saver on the 998/terrova. Will this also fit the 1199 transducer since I am moving that one to the bow/terrova??
AS EC QDE Ethernet Adapter is the same for both models 1199 & 998 as is the HDSI XDCR for each SI model.
The Mega SI XDCR is a whole different critter though.
You're gunna like it.
Robert
Newaygo CTY, MI
Helix12MSI G2N v1.84/Helix10MSI G2N v1.84/Helix10MDI G2N v1.84/ASGPSHSx2/iPilotLinkv2.15/2.04RC-1+2/
Is it possible to run Helix 12 G2N Si head unit with my old HDSI transducers? I am only interested in 455 Khz SI, I understand, that I won't get CHIRP SI/DI and MEGA with such a set-up! I have two boats, and would like to use one head unit on two boats, that's the reason I am asking.
Thanks!