I'm sure this has been covered elsewhere but why is there not a network cable that already has the proper connections? Just got my two Helix 10 mega's and thought I had everything I needed, Y cable, transducer mounting hardware, Etc. Got to the Ethernet cable and realized I needed two of the AS EC QDE adapters.
Was changed to accommodate the wide variety of units being used out in the field. Cheaper from a business standpoint to have an adapter then building a bunch of different Ethernet cables. The Ethernet switch and older units use only a Ethernet cable with the screw in connector. The adapter allows a quicker connection for all cables to the unit.
Wes
Helix 10 MSI+,MDI+,Ultrex IPilot
2023 Phoenix 818
Never assume there's a tomorrow
Also makes upgrading from the older units to the newer units cheaper and easier.....The Ethernet cable itself is the same across all generation units.
__________________________________________________ ___
**Looking for the one that makes it all worthwhile**
__________________________________________________ ___
Units ..... 1197 (6.310) ...1198 (6.490) ... Helix 12 MSI G3N
Do the new soft covers stay on the units when trailing or on the water? they seem like a very snug fit.
Last edited by ntslam; 08-18-2017 at 08:29 PM.
Robert
Newaygo CTY, MI
Helix12MSI G2N v1.84/Helix10MSI G2N v1.84/Helix10MDI G2N v1.84/ASGPSHSx2/iPilotLinkv2.15/2.04RC-1+2/
I'm having an issue with interference with my helix 10 on the bow. I have a helix 7 on the dash. I'm being told that I have to completely turn off the 7 in order for the 10 to function properly. I'm getting nothing but lines on si and di on the 10. Is this true? Is there a way to fix the interference?
2015 basstracker 190 txw
Helix 7 console
Helix 10 bow
Minn kota ulterra
Which Helix 10 (there are 6 of them), and which Helix 7 (there are a dozen of them)????
Post a screen shot of the "lines".
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
I have a Helix 9 G2 mega SI at the console. When I reach a higher speed or just slightly choppy water my unit will completely shut off. I have the di/si transducer mounted externally at the back of the boat and also had the high speed transducer mounted internally. I was told to switch to the 2d sonar (the internal transducer) and this would fix the problem of the unit shutting off. It did not. Any suggestions?
Make sure the cable collector is firmly attached/snapped into both sides
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Robert
Newaygo CTY, MI
Helix12MSI G2N v1.84/Helix10MSI G2N v1.84/Helix10MDI G2N v1.84/ASGPSHSx2/iPilotLinkv2.15/2.04RC-1+2/
I have a Helix 12 Mega that does not work for DI or SI, but does work for 2D. The unit has been restored to factory defaults and updated to the latest software. Have tried with both a Mega transom transducer and also with Mega through the hull transducer. Also have an 1198 and can few the SI from 1198 through the switch. Attached images with frequencies set to Mega, 800, and 455. My thoughts are that the Helix is bad.
Is there something I might be missing before contacting HB and returning for service?
Thanks
What I should have asked is what is the description on the box? Is it a Helix 12 mega SI G2. Etc
There is only one Helix 12 MEGA model at this time. Would recommend contacting HB CS.
Wes
Helix 10 MSI+,MDI+,Ultrex IPilot
2023 Phoenix 818
Never assume there's a tomorrow
So installed my helix 10si g1 and trying to get 2d dialed in.
suggestions on setting? previous 588 worked much better for 2d at this point.
Pretty clear lake 3-50'. It couldn't pick up a 1/4 oz 3"
jig.
Also how do I change what shows up on the screen?
would at least like to look at volts just to make sure my battery is holding up.
thanks
Select Boxes instead of Overlay and then select what readouts you want.
Wes
Helix 10 MSI+,MDI+,Ultrex IPilot
2023 Phoenix 818
Never assume there's a tomorrow
Hi, hooked up the Mega transducer to the 1198, transducer appears to be okay. Appears Helix SI/DI was non-functional out of the box.
Very disappointing to have bought the unit in March, returned the transom transducer immediately to replace with the through hull, then with thru hull back ordered month after month, finally got a transom 3 wks ago after the transom came off back order and through hull a week later. It will be 6 months from when purchased before unit will hopefully be working. Very disappointed with HB.
So to network a Gen 1 Helix 9 & 10 together to share GPS waypoints you need two AS EC QDE adapters and the ethernet cable? No ethernet switch box or anything additional?
Any reason why the descriptions on the AS EC QDE adapters on every website, including Humminbird's, only mention using the adapter for networking between older model Humminbirds? You'd think they'd update something so simple to reflect on their new products and diminish questions such as these...