Note to future self...don't ever do this again...let the dealer handle it
Was a heck of a lot more involved that I had thought but had to have everything set up and working (haven't tested on the water yet).
- HDS-9 Gen3 on the console with the custom BBT mount (awesome quality and support from Van)
- HDS-12 Gen3 on the bow...only made sense to put the bigger screen up there when I'd be looking at it more from a distance (4" mount from BBT)
- MercMonitor (L2) / SmartCraft Gauge
- Digital Trim Sender
- Got the Fortrex universal sonar adapter connected to the bow HDS
- HDS units are networked
LSS2 and HDI transducer are run but not mounted. Could use some advice (meaning pics) on the best place to mount those.
I did notice while trying to pull out the cable for the factory transducer that was powering the Elite 3 Chirp unit, it does not budge. Cable must be zip tied somewhere in the side of the boat. What do you do in that situation? Just cut it out?
How's it look? I only have two bolts in the mount up front currently...think I'm going to put some bolts through with a couple of lock nuts on the bottom side.
DuThRhbdYRmE9KWPsbI5yy73gVs40-OUtBDaEQ-qwNw.jpgJUOMGLARNtuvukst-gno7wEnVLV57Ej6xhe762l-GZw.jpgY0PzifMyuF-cq9om1hyJOoJaGIM-Iya2N0PPBIUmshY.jpg