i going to gear up to start making some holeshot plates like the one below. with this plate, i can be on the pad in 3 seconds with a 32 bc performer 3. im just trying to get an idea of how much interest there is. they will be available in 3/16" aluminum, 3/16" aluminum with laser cut letters of your choice, 1/8" stainless with or without letters and mirrored stainless with or without letters. the plates will come with all wiring, relays and actuator with brackets. currently, i have dimensions for the 6"detwiler/hydrotech leverage which i know some of us are running. other setups will take some input from buyer, measurements etc. the proto type works extremely well but material was free so im not 100% certain on final price. i will get some prices for material within a week or so. also will be making some deck extensions with doors and/or steps. there will also be an option for a electric actuated flip up depth finder(similar to the factory coffin in the bow on strokers), but flip a switch and it pops up from the deck extension starring at you in the face, all with in reach of the driver. when your done with it, flip switch the other way, and it closes back flat. You will be able to walk on it when stowed in the down postion as if it wasnt there. this will benefit strokers because the lack of space in dash for the big fish finders thats available today which make it impossible to mount one with out hanging it out in the wind and drilling holes in the top cap. also have available is a foil, laser cut letters or with out. aluminum or stainless. below is a pic of the first one i had made for myself. any logo can be laser cut in foil.
Hunting season is coming up and i want something to do other than sit in a dang stand waiting for my feet to get cold!! This will be something that i enjoy doing and im not trying to get rich, mainly to help folks and having fun doing it.