Hey guys. The Power Light on my control pad is blinking. Can you help me trouble shoot it?
A few weeks back I had asked Cabela's Service Center to replace my old 30amp circuit breaker as it was heavily rusted. Here is a picture of it below. Cabela's didn't have a 30amp unit in stock, so they placed a 50amp unit into my boat for the short-term, and backordered the 30amp. I took the boat out 3 times with the 50amp in place. The first and 2nd were for my first 2 tourny's this year. I had no problems with the pumps, lights, 2 lowrance units, etc. Then on my 3rd trip out--today, I started having problems. The power light starts blinking and I can't use any of my electronics? I did go to Cabella's today and they replaced the 50amp for the 30amp (see picture below). Although I am still having the same issue.
Old-Original 30amp unit
New-30amp unit
Finally, my boat is equipped with the MegaLink system, so I don't believe its as simple as it used to be when I can trouble shoot all my electronics separately? If there is a different forum where I should've posted this, please let me know.
Can you help me pleeeeease?
2007 200 Elite Champion
Modified by fishthenation at 4:38 PM 5/7/2011