Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Jul 2015
    Location
    Berry, AL
    Posts
    98

    Anybody tried a bravo xs or fs

    Got to go with a Buddy of mine and he is running a bravo xs on his bullet SHO combo and it's a rocket and still drives like it on rails. Just lookin to see if anyone has threw one on these hulls. He lives a state away or I'd try his
    2015 X19 200 SHO

  2. Member
    Join Date
    Jul 2016
    Location
    NEW ORLEANS
    Posts
    60
    #2
    what prop are you currently running


    i found the best prop for my 201 x19 with 200 sho.....i run the turbo FXP 25p... the boat is a totally different boat with this prop.....

    i tried the following props

    25t1
    turbo 2+2 25p
    power tec vmx 25p
    tempest 24p
    ~~~~2016 X-19 YAMAHA - 200SHO & LOVE IT~~~

  3. Member
    Join Date
    Jul 2015
    Location
    Berry, AL
    Posts
    98
    #3
    I'm runnin the Txp 3 blade and so far it's been the best I've used also.


    Vmx3
    tempest
    fury4
    the ot4 is a good prop but I've seen and herd ther slingin blades recently
    4 blades have always been good on these hulls
    2015 X19 200 SHO

  4. Member
    Join Date
    Jun 2014
    Location
    Hector arkansas
    Posts
    488
    #4
    Will a txp work on a 175 sho

  5. Member
    Join Date
    Jul 2015
    Location
    Berry, AL
    Posts
    98
    #5
    Yes it will the Txp and FXP are basically the same prop except Txp has small vent holes and has little to no effect on my boat
    with the 175 a 24 pitch will be ok depending on jackplate setback and how heavy u load your rig
    2015 X19 200 SHO

  6. Member T-Bob's Avatar
    Join Date
    Jul 2006
    Location
    Thibodaux La
    Posts
    2,149
    #6
    If you guys are not running 80+ you dont have to worry about the TXP OT4 slinging blades. So far it has been my fastest prop. Although the TXP 3 blades will still be a couple mph faster on top end, they just wont handle and drive as good as the OT4.
    Xpress X19/200SHO

  7. Member
    Join Date
    Jun 2014
    Location
    Hector arkansas
    Posts
    488
    #7
    Will the 4 blade turn as many rpms
    as the 3

  8. Member T-Bob's Avatar
    Join Date
    Jul 2006
    Location
    Thibodaux La
    Posts
    2,149
    #8
    No, you may have to go down a pitch if you go with the 4 blade vs a 3 blade.
    Xpress X19/200SHO