Seat Removal 2015 C Intracoastal

[RangerSam]

I'll try to be brief... this is a little different than the other seat removal posts that got me started on the right path - Thanks to those who posted that... it sure does help...

the drivers seat is not fastened through the back, it is adjustable at the bottom of the seat to get you closer to the wheel


the side skins have to be removed


the handles and trim around the shifter/throttle


here is the 12v accessory power outlet that has to come out for the skin removal - below that is the livewell level/cable




Now you see the 46 gallon tank and all the access needed to run wires .....

there are a few steps left out but this give you the overall deal...

the driver seat assembly is a little heavy for one person but you can manage. Weight is ~ 50- 60 #

[Carlos H]

Good info

pinned

[moretoolife]

Thanks for the explanation. I have the same boat but it has a sliding driver's seat and I need to replace my fuel gauge sending unit in the center of the tank. Will I need to remove the driver's seat to get to it?