Results 1 to 5 of 5
  1. #1
    Member GonFishn's Avatar
    Join Date
    Oct 2010
    Location
    COLUMBUS, OHIO
    Posts
    1,053

    Question 1996 Champ 202 DCX Elite

    Need info re prop and motor height. Has a 2003 Marc 225 FOR on it. Have something similar? What hole is your motor on and what three blade r u running? Have a 6" backplate on it as well. Was looking at a Fury 24 pitch? Thanks for any responses.

  2. Member
    Join Date
    May 2007
    Location
    Houston
    Posts
    2,093
    #2
    25 or 26 Tempest plus

  3. Member
    Join Date
    Mar 2013
    Location
    High Ridge Missouri 63049
    Posts
    2,542
    #3
    Are you looking for top end speed or better handling & hole shot? I run a lot of rough water so I run a 4 blade on my 203 (24P fury 4 225 Yamaha). The 202 will shine with a 25-26 3 blade tempest or Yamaha M series. The 4 blade trophy’s did ok on them but their are better choices available now like the fury, Croxton razor series.

  4. Member GonFishn's Avatar
    Join Date
    Oct 2010
    Location
    COLUMBUS, OHIO
    Posts
    1,053
    #4
    I have a 25 Tempest Plus and I'm getting 56mph top end with a 225 DFI. That's why I''m wondering about lowering the otor a hole or not. So, if I'm reading STLbassbuster right, I should be looking at a 25 Fury?

  5. Member
    Join Date
    May 2007
    Location
    Houston
    Posts
    2,093
    #5
    Sounds like motor may have problems. Is the boat new to you? Need to check and make sure it is firing on all 6 cylinders. Check fuel lines also. Make sure throttle is opening all the way at wot.