Page 1 of 2 12 LastLast
Results 1 to 20 of 27
  1. #1
    Member
    Join Date
    Apr 2012
    Location
    clintwood va
    Posts
    64

    Update Red and Yellow

    Well since i got my big box of goodies from lou iv been working alot on my stroker (pics when i wash her alittle). I have to say lou's work is some of the best iv ever seen and how he can make everything work with measurements via pictures over the phone its crazy. You will see when i post the pics just wow.

    Iv done pretty good on my mini resto, but im in need of a little help. First is i need to buy all new seats, main 2 bucket, 2 pole bucket, one mini seat. Any info on those will help a lot. Second my poor livewells iv changed all my pumps wireing but the stupid valves are giveing me a fit ... and its not really them but just were they are at is so hard to even see whats going on. So i guess im just going to TAKE out the tank and redo everything. Now i can get most of the items but the valves i have no clue were to get thoes or the wires that make them work... also any and all info from someone that has repaired them or done a complete redo would help a lot.

  2. Member Stroker3.2XS's Avatar
    Join Date
    May 2005
    Location
    Harrison, AR
    Posts
    1,538
    #2
    +1 on Lou's work, the man can do some magic. If the seats just need to be reupholstered, call around to the upholstery shops. If the seats need to be completely replaced, call Chub / Stroker. Maybe try Flow-Rite for the livewell.

  3. aka Strokedyamaha StrokerSmoker's Avatar
    Join Date
    Oct 2014
    Location
    Kansas
    Posts
    2,045
    #3
    pics or this thread is usless.....just kidding I know your kicking your self about the old red one you had it was a very clean boat when you got and when you sold it....some times it takes a change to see the light

    Hi performance parts or a Yamaha power head visit
    Hydro-Tec's web site @ http://www.yamaha-rebuild.com/
    Paul Hottman Hydro-Tec's Pro staff since 1998

  4. Banned
    Join Date
    Dec 2011
    Location
    West Monroe, LA
    Posts
    3,063
    #4
    have the seats redone....even cut them down first.....give me a number n ill text ya some pics of what i did on the seats...

  5. Member
    Join Date
    Apr 2012
    Location
    clintwood va
    Posts
    64
    #5
    yea i loved the red one my butt is still sore after all that haha.... just got her cleaned up for a tournament ill get the pics very soon... ahh hell ill take them now haha brb

  6. Member
    Join Date
    Apr 2012
    Location
    clintwood va
    Posts
    64
    #6

  7. Member
    Join Date
    Apr 2012
    Location
    clintwood va
    Posts
    64
    #7


















    like i said lou's work is the best... the gopro is always with me on 1080p 30fps on 5min loop so i always get anything good that happens saves on alot of video editing also tested up to 85mph ( fastest i can get up to on my little old lake)

  8. RIP -April 30,2023
    Join Date
    May 2013
    Location
    north louisiana
    Posts
    7,819
    #8
    thats nice!!!

  9. Banned
    Join Date
    Dec 2011
    Location
    West Monroe, LA
    Posts
    3,063
    #9
    can u give me a better pic of the steering setup u got?

  10. Member
    Join Date
    Apr 2012
    Location
    clintwood va
    Posts
    64
    #10
    sure

    don weed at european marine is were i got my motor and steering he also did all the smartcraft and lowrance setup

  11. Member
    Join Date
    Apr 2012
    Location
    clintwood va
    Posts
    64
    #11











  12. Member
    Join Date
    Apr 2012
    Location
    clintwood va
    Posts
    64
    #12
    also my number is 276 393 2441 you can send the pics of your seats and stuff

  13. RIP -April 30,2023
    Join Date
    May 2013
    Location
    north louisiana
    Posts
    7,819
    #13
    thats an interesting steering setup. never seen that before. supposed to be better?? whats the story with it? it also looks like the hydrodynamics plate has some negative tuck built into it. is that right? how many degrees??

  14. RIP -April 30,2023
    Join Date
    May 2013
    Location
    north louisiana
    Posts
    7,819
    #14
    hydro website shows jackplate to have 3 degrees of negative tuck built into it.

  15. aka Strokedyamaha StrokerSmoker's Avatar
    Join Date
    Oct 2014
    Location
    Kansas
    Posts
    2,045
    #15
    I had not seen a pic of your Dads before that's a sharp rig If I remember your Dad has a 280?.....Yours is looking pretty good too congrats......is your set back 14-15 inch?

    Hi performance parts or a Yamaha power head visit
    Hydro-Tec's web site @ http://www.yamaha-rebuild.com/
    Paul Hottman Hydro-Tec's Pro staff since 1998

  16. Member Stroker3.2XS's Avatar
    Join Date
    May 2005
    Location
    Harrison, AR
    Posts
    1,538
    #16
    on getting the boat cleaned up and looking good!!! Don Weed / European Marine prefers the U-Flex over the Sea Star unit. If or when my Sea Star goes to crap, I'll look into the U-Flex.

  17. RIP -April 30,2023
    Join Date
    May 2013
    Location
    north louisiana
    Posts
    7,819
    #17
    the uflex better? what about the helm??

  18. aka Strokedyamaha StrokerSmoker's Avatar
    Join Date
    Oct 2014
    Location
    Kansas
    Posts
    2,045
    #18
    Is that Kurts old rig? 2000 or 2001?

    Hi performance parts or a Yamaha power head visit
    Hydro-Tec's web site @ http://www.yamaha-rebuild.com/
    Paul Hottman Hydro-Tec's Pro staff since 1998

  19. Member
    Join Date
    Apr 2009
    Location
    Nixa
    Posts
    1,806
    #19
    That is looking mighty fine for sure!

  20. Iowa/Wisconsin/Hunting & Gun Lodge/Stroker Moderator Wags's Avatar
    Join Date
    Jun 2004
    Location
    Camanche Iowa
    Posts
    13,553
    #20
    Very nice
    LeaLea

Page 1 of 2 12 LastLast