-----
A Technical troubleshooter possessing more tools than talent !
Thanks for the chart! I am sure it will come in handy!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RUSTY63 »</TD></TR><TR><TD CLASS="quote">Seahorse, is that a QL77JC4 or is that a QL16V?????? </TD></TR></TABLE>
My personal preference is the UL81C plug.
-----
A Technical troubleshooter possessing more tools than talent !
The chart specs the UL77V or L16V surface gap. However, note 3 states, all VRO/OMS equipped motors the "QL" suppressor plug is recommended.
Should I change from the UL77V or L16V surface gap to the QL suppressor plug, or say the heck with it and wait for my 150 E-Tech HO?
Regards,
If you can't run with the big dogs, just stay on the porch.
Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011
SST... 14 1/2" x 19" 45.0 mph.@4950
Rebel 15 1/2" x 17" 45.1 mph.@5250
Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
Rebel 15 3/4" x 15" 44.2 mph.@5700-5750
I can't believe they forgot note 2 indexing of the QL16V's ! CM
@ CM!!
Mr. Hatcher, forget it and get the E-Tec.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RUSTY63 »</TD></TR><TR><TD CLASS="quote">Mr. Hatcher, forget it and get the E-Tec. </TD></TR></TABLE>
I am leaning in that direction. I just hope the new E-Tec will be as fast as my old XP150
If you can't run with the big dogs, just stay on the porch.
Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011
SST... 14 1/2" x 19" 45.0 mph.@4950
Rebel 15 1/2" x 17" 45.1 mph.@5250
Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
Rebel 15 3/4" x 15" 44.2 mph.@5700-5750
It would have to be, your old motor pours more fuel out than it burns........
Rusty, now you've gone and hit the last nerve I have left. . My 1987 GT150 was a heck of a lot stronger than the 1999 175 carbed Johnny that I replaced it with and the fuel usage is about the same. I would have thought there would have been quite a power increase in the 175 since it's rated at the propshaft and the 150 GT was rated at the powerhead. Since that GT150 was part of my Ranger 373V Bass Masters Classic rig is it possible that the Johnny's for those rigs were hopped up from the factory to show well in the "Classic"? I spent a small fortune in 2000 updating and repowering that rig only to gain 2mph. The motor is much quieter and the oil usage is much less.
Well...As Won would say.....Your running a Lead Sled.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RUSTY63 »</TD></TR><TR><TD CLASS="quote">It would have to be, your old motor pours more fuel out than it burns........ </TD></TR></TABLE>
Yea, yea, yea I hear ya. Seeing is believing. If da bomb-bar-dee-airs can build a E-Tec 150 HO that will out preform, and get better gas mileage than my 1985 XP150, I buy it. Other than that, dem dudes better put up or shut up! You tell em I said put up or shut up. I wannna see, sho me now.
If you can't run with the big dogs, just stay on the porch.
Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011
SST... 14 1/2" x 19" 45.0 mph.@4950
Rebel 15 1/2" x 17" 45.1 mph.@5250
Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
Rebel 15 3/4" x 15" 44.2 mph.@5700-5750
Couldn't have anything to do with me going from 175 pounds to 260 could it?
Mr. Hatcher, If I were you, I would start looking at a New E-Tec 150.....Coming soon to a dealer near you.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RUSTY63 »</TD></TR><TR><TD CLASS="quote">Mr. Hatcher, If I were you, I would start looking at a New E-Tec 150.....Coming soon to a dealer near you. </TD></TR></TABLE>
Thank you, thank you. You are the man of the year. Any word on if there will be a HO version in the 150 HP range?
If you can't run with the big dogs, just stay on the porch.
Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011
SST... 14 1/2" x 19" 45.0 mph.@4950
Rebel 15 1/2" x 17" 45.1 mph.@5250
Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
Rebel 15 3/4" x 15" 44.2 mph.@5700-5750
Cant say.....Yet