Results 1 to 3 of 3
  1. 05-10-2023, 07:59 PM #1
    bobby.leejr
    bobby.leejr is offline
    Member
    Join Date
    Apr 2023
    Location
    London, KY
    Posts
    15

    2007 Z20 Keypad Issues HELP!!! Replaced and still failing.

    My 2007 Ranger Z20's keypad has been giving me trouble. The auxiliary buttons work sometimes and sometimes they don't when I flip the breaker. I thought the keypad was bad, so I bought a new keypad and brain box. Installed it today and it still is doing the same thing. Going to the front and pushing the bow keypad will activate both keypads sometime. If it doesn't, I reset the breaker and try again and eventually it will work.

    Do you all think the front keypad is bad? I bypassed the breaker and it worked straight away, but then I tried again and it didn't work.

    Thanks for the help.
    Reply With Quote Reply With Quote
  2. champ223
    champ223 is offline
    Member
    Join Date
    Oct 2004
    Posts
    4,130
    #2 05-10-2023, 09:35 PM
    Maybe check all your ground wires. Check any and all crimped on terminals. When it goes out can you check for power at the brain box with a meter ?
    Reply With Quote Reply With Quote
  3. stevieboy
    stevieboy is offline
    Member
    Join Date
    Apr 2012
    Location
    Sapulpa, Ok
    Posts
    26
    #3 05-11-2023, 11:50 AM
    Don’t tighten the board down to tight, it can cause them to bend just enough to keep it from working. I know from experience. It won’t cost anything and it’s worth a try. Good luck.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »