Page 1 of 2 12 LastLast
Results 1 to 20 of 21
  1. #1
    Cajun Boats/MN Fishing Reports Moderator DJ from MN's Avatar
    Join Date
    Jun 2004
    Location
    Starbuck, MN
    Posts
    3,441

    Manufacturers of Cajun Components List

    This list was provided to me by James Ardoin, AKA crawworm,.....The list is titled as: Manufacturers of CAJUN Components Independently Warranted by the Manufacturer............Thanks a bunch Jim.....

    GELCOATS
    Cooks Paint Company
    P.O. Box 88424
    Dallas, TX.75388

    CARPET
    Carriage Industries
    P.O. Box101265
    Atlanta, GA 30721

    PUMPS
    Attwood Corporation
    P.O. Box A
    Lowell, MI 49331

    Johnson Pumps Of America, Inc.
    8700 North Rose Street
    Schiller Park, IL 60176

    WIRING HARNESS
    Sterling Technologies, Inc
    23177 Commerce Drive
    Farmington Hills, MI 48335

    STEERING WHEELS
    Grant Marine
    700 Allen Avenue
    Glendale, CA 91201

    Teleflex
    P.O. Box 101444
    Atlanta, GA 30392

    STEERING HEADS AND CABLES
    Detroit Marine
    2001 West Alexandrine
    Detroit, MI 48207

    Teleflex
    P.O. Box 101444
    Atlanta, GA 30392

    UPHOLSTERY
    Box’s Boat Seats
    Rt 3, Industrial Park
    Winnsboro, LA 71295

    PEDESTALS
    Swivel-Eze Marine
    1504 South Beckley
    Lancaster, TX 75164

    Moeller Manufacturing Company
    P.O. Box 1634
    Providence, RI 02903

    R & R Design, Inc
    P.O. Box 220
    Terrell, TX 75160

    Springfield Aluminum
    P.O. Box 588
    Nixa, MO 65714

    PLEXIGLASS WINDSHIELDS
    Custom Mold and Tint, Inc
    1991 Highway 425 S
    Monticello, AR 71655
    1-870-367-7083

    WRAP AROUND WINDSHIELDS
    Campbell Manufacturing Company
    1262 Viceroy Drive
    Dallas, TX 75247

    DEPTH FINDERS
    Lowrance Electronics
    1200 East Skelley Drive
    Tulsa, OK 74126

    TROLLING MOTORS
    Motorguide
    P.O. Box 4345
    Starkville, MS 39759

    DECALS
    Instant Signs
    Lexington, KY
    Lisa Nunan
    1-859-268-5204


    SEATS AND UPHOLSTERY
    Deans Top and Canvas
    3748 Highway 5 South
    Mountain Home, AR 72653
    dan@deanstopandcanvas.com
    Deanstopandcanvas.com


    (Added 4/8/08, They have all original tarp patterns AND the logo's for embroidery)
    Brian Rush, Aurora Canvas
    4243 West Third
    Battlefield, MO 65619
    417-883-9811
    fax: 417-883-4456


  2.  
  3. Born on th Llano Estacado Tx Champ's Avatar
    Join Date
    Jun 2004
    Location
    Abilene, TX
    Posts
    17,318
    #2

    Re: Manufacturers of Cajun Components List (phiggy68)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by phiggy68 &raquo;</TD></TR><TR><TD CLASS="quote">Does anyone have information on the manufacturer of the rod locker (lockable type) latches for '93 Cajun bassboat? </TD></TR></TABLE>

    phiggy, a lot of the bass boat manufacturers used Perko hardware in that timeframe. Might take a look and see by clicking on their name then clicking on Catalog. Chances are also that, that particular latch is no longer available. Looks like they are on page 206

    Good Luck!

  4. Member
    Join Date
    Jul 2008
    Location
    Madison
    Posts
    7
    #3

    Re: Manufacturers of Cajun Components List (DJ from MN)

    The switches are made by McGill

    http://www.mcgillelectrical.co...D=161

  5. Member
    Join Date
    May 2009
    Location
    pasadena
    Posts
    4
    #4
    Who made the fuel tank selector valves????

  6. Member
    Join Date
    Mar 2009
    Location
    New Orleans
    Posts
    51
    #5

    Re: (reedspaint)

    I wish i knew who had the prints or molds for the passenger consoles..

    http://www.facebook.com/reqs.p...47129 [IMG][/IMG]

  7. Member
    Join Date
    Jan 2012
    Location
    Luling
    Posts
    5
    #6

    Re: (reedspaint)

    Did u ever find out who made the fuel selelector valve? text me @ 504 495 1549 or email mark.leblanc@shell.com. Thanx for any info.

  8. Member CastingCall's Avatar
    Join Date
    May 2012
    Location
    MN
    Posts
    3,159
    #7
    Quote Originally Posted by crappie slayin View Post
    Did u ever find out who made the fuel selelector valve? text me @ 504 495 1549 or email mark.leblanc@shell.com. Thanx for any info.
    Not sure of OEM, but here are a couple of possible replacements for the factory selector valve:
    R&R Fuel Selector Valves #RR-100FSV $58.37
    Fuel Selector Valve

  9. Member
    Join Date
    Aug 2012
    Location
    Louisiana
    Posts
    2
    #8
    Need some wiring hornes help

  10. Member
    Join Date
    Nov 2012
    Location
    Ozarks
    Posts
    5
    #9
    Dose any one know how I can obtain and original or color copy/reproduction manual for my 1978 Cajun Mach II (bass boat) w/ original Mercury 900 Power Trim completely rebuilt. Overall the fiber glass and transom is in good condition. Lake test was fantastic. Trying to restore close to new.

  11. Member
    Join Date
    Jul 2011
    Location
    Gatineau Qc Canada
    Posts
    1,878
    #10
    Cajundan, there are none, back in those days the dealer who bought the boats from Cajun did the wiring, so they would've done it a thousand ways.. That's why there isn't any manual for the older Cajuns.

  12. Member
    Join Date
    Aug 2009
    Location
    Wichita KS
    Posts
    3,577
    #11
    Quote Originally Posted by ShawnD View Post
    Cajundan, there are none, back in those days the dealer who bought the boats from Cajun did the wiring, so they would've done it a thousand ways.. That's why there isn't any manual for the older Cajuns.
    The boat wiring diagram for the 1978 Mach II was glued to the bottom of the rear deck lid. Most of them came off and was lost. That was one of the perks we had with Cajun. We had no prerigging back then and mounted all the motor wiring and trim guauge, but the boat came completly wired. On some models we had to install the tach.

  13. Member
    Join Date
    Jul 2011
    Location
    Gatineau Qc Canada
    Posts
    1,878
    #12
    Jughead, I have that same print glued to my latch, I'll be taking it off seeing how I redid everything my way anyways.

  14. Member
    Join Date
    Aug 2009
    Location
    Wichita KS
    Posts
    3,577
    #13
    Quote Originally Posted by ShawnD View Post
    Jughead, I have that same print glued to my latch, I'll be taking it off seeing how I redid everything my way anyways.
    That probably was a good idea.

  15. Member
    Join Date
    Apr 2013
    Location
    auburn alabama
    Posts
    6
    #14
    had anyone found a windsheild for a 1991 cajun bass boat if so i would be eternally grateful it is a duel console and the passenger windsheild is gone

  16. Member
    Join Date
    Aug 2009
    Location
    Wichita KS
    Posts
    3,577
    #15
    Quote Originally Posted by cdm plott View Post
    had anyone found a windsheild for a 1991 cajun bass boat if so i would be eternally grateful it is a duel console and the passenger windsheild is gone
    What model of Cajun?

  17. Member
    Join Date
    Oct 2010
    Location
    Virginia
    Posts
    379
    #16

    1993 Cajun 190 Pro Sport- Need Windshields!

    Quote Originally Posted by 316jughead View Post
    What model of Cajun?
    Mine is a 1993 Cajun 190 Pro Sport dual console, and I need both windshields. Does anyone even have a picture of what they should look like?-TH

  18. Member
    Join Date
    Apr 2012
    Location
    kalamazoo,mi.
    Posts
    123
    #17
    Call or email custom mold and tint in the components list they still had the mold and blue print for my 87 cajun. They have a website and you can look up your model. good luck..

  19. Member
    Join Date
    Jun 2014
    Location
    NH
    Posts
    1
    #18
    looking for weight capacity for 84 20' cajun, just purchased this evening

  20. Member
    Join Date
    Apr 2014
    Location
    mississippi
    Posts
    2
    #19
    I have a 1984 Rajun Cajun and from what I can tell the wiring harness drawing on the back lid is the same as the one in the mercury engine repair book, for 1986 motors

  21. Member
    Join Date
    Feb 2016
    Location
    Leander, TX
    Posts
    56
    #20
    I have just bought a 1995 Travis Edition 209 was wondering if there is anybody out there that might know where I could find a glove box door?
    Thanks
    Eddie

Page 1 of 2 12 LastLast

Similar Threads

  1. List of cajun models
    By BJS in forum Cajun Boats
    Replies: 14
    Last Post: 08-21-2017, 11:32 AM
  2. Ethanol potential problems and other manufacturers views?
    By oldgeezer in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 1
    Last Post: 07-07-2011, 02:08 AM
  3. Who manufacturers the lowest memory fluorocarbon
    By bbbking in forum BBC Polls
    Replies: 5
    Last Post: 06-16-2009, 03:57 AM
  4. Thinking of a building a new skippin' rod(components list)
    By TonyMc in forum Rod Building & Tackle Making
    Replies: 5
    Last Post: 08-28-2008, 06:27 PM
  5. You'd think reel manufacturers made line, too
    By Stein in forum Kansas Bass Club
    Replies: 6
    Last Post: 04-17-2007, 04:00 PM