Page 1 of 2 12 LastLast
Results 1 to 20 of 39
  1. #1
    BBC SPONSOR Bass Cat Boats's Avatar
    Join Date
    Jul 2004
    Location
    Mountain Home
    Posts
    15,069

    Parts help for you guys...

    Gents',

    We are happy to help out on any parts needs you folks have that we can assist you on with your Bee's. We did this in cases of other manufacturers and owners during their demise previously. We are offering you all the same.

    Service will be considered on par with ours for time. If you need any parts that a BCB crosses over wtih, we will do our best to help you out. We know there are not a lot of items, though there are some.

    Not having service and parts for your boats is a general pain, and we understand that. So if we can help, we are willing to do so. We can answer general questions and get you answers on plenty. If we need to look at an image we'll do it! We will do whatever you need to get you some help.

    BCB


  2. Member
    Join Date
    Feb 2007
    Location
    fortwayne
    Posts
    12
    #2

    Re: Parts help for you guys... (Bass Cat Boats)

    Thanks for your support and offer of help for us with bumblebee's

  3. Member
    Join Date
    Aug 2006
    Location
    Woodbridge
    Posts
    75
    #3

    Re: Parts help for you guys... (Bass Cat Boats)

    That's very thoughtful. Thanks!

  4. Member
    Join Date
    Jun 2004
    Location
    Camden
    Posts
    383
    #4

    Re: Parts help for you guys... (Shellback)

    Thanks a lot guys

  5. Member gjudkins's Avatar
    Join Date
    Feb 2007
    Location
    Northeast Ms
    Posts
    3,017
    #5

    Re: Parts help for you guys... (Bass Cat Boats)

    Thanks for taking the time!
    Guy
    I want our country back !!!

  6. Member
    Join Date
    Feb 2007
    Location
    fortwayne
    Posts
    12
    #6

    Re: Parts help for you guys... (Bass Cat Boats)

    hey, I just visited their website and I must say they have all kinds of parts and even seats. And I beleive they are one if not only family run boat builders still left. Sure it is not Bumblebee but at least they are willing to help and for that we should thank them.

  7. Blazer Boats Moderator Rebel1's Avatar
    Join Date
    Jun 2004
    Location
    Taylors, SC
    Posts
    12,722
    #7

    Re: Parts help for you guys... (basskisser1)

    Allison, Blazer, and Basscat are the only companies owned by the original families that started them. Good job Bass Cat for stepping up to help all of the Bee owners.

  8. Member
    Join Date
    Jan 2006
    Location
    Cowan Tn.
    Posts
    5,031
    #8

    Re: Parts help for you guys... (Rebel1)

    Thanks!!!!!that says alot about ya'll!!!!

  9. Member
    Join Date
    Jul 2004
    Location
    Lacoochee , Florida
    Posts
    2,676
    #9

    Re: Parts help for you guys... (bassworm1)

    Thanks I do need a latch

    Rick Someillan
    Lacoochee, Florida
    2016 21 TRX
    250 Pro XS

  10. Member
    Join Date
    Jun 2004
    Location
    Marietta
    Posts
    2,853
    #10

    Re: Parts help for you guys... (Bass Cat Boats)

    I sure wish you could find me a livewell divider....I'm too lazy to get off my butt and make one

  11. BBC SPONSOR Bass Cat Boats's Avatar
    Join Date
    Jul 2004
    Location
    Mountain Home
    Posts
    15,069
    #11

    Re: Parts help for you guys... (toddandy)

    Get some dimensions and we will see how close one is? Though it probably won't fit, it might be worth a measurement to find out. Plus if it is close, you could always trim it some and it would be a powder coated part.

    BCB

  12. Member
    Join Date
    Jun 2004
    Location
    Marietta
    Posts
    2,853
    #12

    Re: Parts help for you guys... (Bass Cat Boats)

    I took rough measurements a while back,and it's about 15X19....that boat has a HUGE livewell

    Thanks for your assistance....I'll bet you'll get a few boat sales in the future due to your kindness and helpfullness....not too many companies will reach out to help a group of folks that bought their competitors goods.

    Thanks...God Bless

  13. BBC SPONSOR Bass Cat Boats's Avatar
    Join Date
    Jul 2004
    Location
    Mountain Home
    Posts
    15,069
    #13

    Re: Parts help for you guys... (toddandy)

    We think we have something that will save you some time.

    Contact Parts@BassCat.com and give them your addy. We will forward it to you on good faith and if it works you can be invoiced on it.

    If not, send it back!

    The raw dimensions are 19.5" x 15.5" at the smallest section. So we think you can trim, file and paint the edges and gett'er dun!

    BCB

  14. Member
    Join Date
    Jun 2004
    Location
    Marietta
    Posts
    2,853
    #14

    Re: Parts help for you guys... (Bass Cat Boats)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bass Cat Boats &raquo;</TD></TR><TR><TD CLASS="quote">We think we have something that will save you some time.

    Contact Parts@BassCat.com and give them your addy. We will forward it to you on good faith and if it works you can be invoiced on it.

    If not, send it back!

    The raw dimensions are 19.5" x 15.5" at the smallest section. So we think you can trim, file and paint the edges and gett'er dun!

    BCB</TD></TR></TABLE>

    Wholly molly rocky.....I'll bet that'll do the job perfectly.

    Thank you so very much....anyone I should send the mail to specifically????

    You're the greatest....and I stand on my previous post....you'll get new customers with this type of service.....I'm blown away

  15. BBC SPONSOR Bass Cat Boats's Avatar
    Join Date
    Jul 2004
    Location
    Mountain Home
    Posts
    15,069
    #15

    Re: Parts help for you guys... (toddandy)

    This is what we do for our owners, and we offered you that service.

    Just hit the address above and they will be aware. The petition is sitting in their office waiting on an addy. Just let them know what it is about and that you are a Bumble Bee Owner.

    BCB

  16. Member
    Join Date
    Jun 2004
    Location
    Marietta
    Posts
    2,853
    #16

    Re: Parts help for you guys... (Bass Cat Boats)

    Thanks again....email is on it's way

  17. Moderator
    Join Date
    Jun 2004
    Location
    Killen, AL
    Posts
    8,565
    #17

    Re: Parts help for you guys... (toddandy)



    Good job guys.
    Jason Phillips

  18. BBC SPONSOR Bass Cat Boats's Avatar
    Join Date
    Jul 2004
    Location
    Mountain Home
    Posts
    15,069
    #18

    Re: Parts help for you guys... (toddandy)

    Todd,

    How did the petition work out for you?

    BCB

  19. Member
    Join Date
    Jun 2004
    Location
    Marietta
    Posts
    2,853
    #19

    Re: Parts help for you guys... (Bass Cat Boats)

    I got it on Tuesday,but won't get to try it till this weekend....I'll let you know if it fits....I wasn't expecting it to be metal

    Thank you so very much for your trust.....I promise you that I won't betray that trust

  20. Member
    Join Date
    Jun 2004
    Location
    Marietta
    Posts
    2,853
    #20

    Re: Parts help for you guys... (Bass Cat Boats)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bass Cat Boats &raquo;</TD></TR><TR><TD CLASS="quote">Todd,

    How did the petition work out for you?

    BCB</TD></TR></TABLE>

    No go on the divider.....It's too big,and being metal,I'm just not comfortable cutting it.....I sure do appreciate that you let me try it out though

    I'll send it back this next week

Page 1 of 2 12 LastLast

Similar Threads

  1. february parts sale at www.cheaperboatparts.com 20% off yamaha parts
    By Tony Reynolds RPM in forum Yamaha Motors
    Replies: 4
    Last Post: 03-02-2009, 04:49 AM
  2. If you guys need parts...
    By TimS in forum Kansas Fishing
    Replies: 12
    Last Post: 08-06-2008, 08:12 AM
  3. Hey guys need help with parts
    By pjhandyman in forum Stratos/Javelin Boats
    Replies: 0
    Last Post: 04-05-2008, 02:43 PM
  4. Need parts price -- Parts Chicklet
    By Lockjaw in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 08-27-2007, 06:37 PM