Page 38 of 40 FirstFirst ... 283637383940 LastLast
Results 741 to 760 of 781
  1. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,308
    #741
    Quote Originally Posted by ADitt View Post
    The transducer is brand new, but is there any chance it’s defective? Also if there was some sort of interference I would probably just get erratic readings wouldn’t I? Instead of no reading?
    Cross-talk will still show something, just not accurately.

    There is always a chance a new transducer is faulty. You trouble shoot as I described in post #739.
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL

  2. Member
    Join Date
    May 2019
    Location
    Farmington Minnesota
    Posts
    6
    #742
    I will trouble shoot as you said in post #739 when I go back up to the cabin where my boat is. Thanks.

  3. Member
    Join Date
    Nov 2016
    Location
    Houston, TX
    Posts
    45
    #743
    Hello All,
    having an issue with my onix units. they will no longer network. have onix 8 si at console, 10 sonar at bow. have the latest update. they networked fine then quit. purchased new cable to make sure that was not the issue. Still nothing. it initially sees it and asked to network. when they start they both look like they are going then i get a beep and then 2 alarm beeps. Tried restoring defaults multiple times with no success. H not much help. its not worth paying $1000 to send them back for H to work on then. any help is appreciated. thanks

  4. Member Trytoofish's Avatar
    Join Date
    Nov 2012
    Location
    Minneota,Minnesota 56264
    Posts
    160
    #744
    Have you tried saving all your nav data on both units to a card... and then deleting all nav data from both units ....then restore defaults on both units. sometimes corrupted waypoints cause network issues
    I Spend Most of my money on fishing, fishing tackle and boats, Very little is wasted......

  5. Member
    Join Date
    Nov 2016
    Location
    Houston, TX
    Posts
    45
    #745
    Im trying that this morning. thanks

  6. Member
    Join Date
    Nov 2016
    Location
    Houston, TX
    Posts
    45
    #746
    corrupt waypoint. deleted waypoints and routes, reset factory defaults, rebooted. work now. Thanks Trytoofish.

  7. Member
    Join Date
    Sep 2004
    Location
    Wonder Lake
    Posts
    770
    #747
    Looking at new ulterra TM?
    Will the new mega DI / SI built into the MinKota Ulterra work with my Onix 8 and Onix 10, both are Si units?


    Rajun Cajun
    Johnson 1995 #J130TLEOP
    S# GO3872031

  8. Member
    Join Date
    Sep 2004
    Location
    Wonder Lake
    Posts
    770
    #748
    4-10-2020 guess not sold my Onix and upgrading to Solix. Mute point now.


    Rajun Cajun
    Johnson 1995 #J130TLEOP
    S# GO3872031

  9. Member
    Join Date
    Apr 2008
    Location
    Lakeview,AR.
    Posts
    7,994
    #749
    Congrats! Sorry never saw your post in December
    Tell me where has a slow movin' once quick draw outlaw got to go

  10. Member
    Join Date
    Apr 2020
    Location
    Bangor Maine
    Posts
    625
    #750
    So what is the difference between the Onix 10 SI NT and the Onix 10 SI NT Combo?? That are listed as two separate products AND the badging on the front for the Combos is different, ie sales Cross Touch under the Onix 10 SI on the cover to the SD card slots. Appreciate any feedback anyone can provide.

  11. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,308
    #751
    Quote Originally Posted by MainelySmallmouth View Post
    So what is the difference between the Onix 10 SI NT and the Onix 10 SI NT Combo?? That are listed as two separate products AND the badging on the front for the Combos is different, ie sales Cross Touch under the Onix 10 SI on the cover to the SD card slots. Appreciate any feedback anyone can provide.
    No difference. Combo was used with the number series units to indicate it was a combination of sonar and GPS. Just some of the ONIX units got that same designation. All ONIX units are sonar and GPS with internal GPS antennas.

    NT models are Non-Touch screens, just buttons. CT models are Cross-touch, buttons and touch screen.
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL

  12. Member
    Join Date
    Sep 2004
    Location
    Wonder Lake
    Posts
    770
    #752
    will my old 2D TD (490411-T) thru hull work on the Y cable with my new Sloix G2 units? It was working with my old Onix units.


    Rajun Cajun
    Johnson 1995 #J130TLEOP
    S# GO3872031

  13. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,308
    #753
    Quote Originally Posted by scubatelco View Post
    will my old 2D TD (490411-T) thru hull work on the Y cable with my new Sloix G2 units? It was working with my old Onix units.
    It will if you change the 2D frequency setting to HB 83/200 kHz in the Sonar menu, turn off Auto Configure. The ONIX one doesn't do HW CHIRP.
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL

  14. Member
    Join Date
    Sep 2004
    Location
    Wonder Lake
    Posts
    770
    #754
    Thanks Wayne you are the best


    Rajun Cajun
    Johnson 1995 #J130TLEOP
    S# GO3872031

  15. Member
    Join Date
    Apr 2012
    Location
    irvine, kentucky
    Posts
    16
    #755
    Is there any issues with the last Onix update v.350?

  16. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,308
    #756
    Quote Originally Posted by bick11 View Post
    Is there any issues with the last Onix update v.350?
    The one I can think of is the depth glitch was not fully resolved yet. May have to use 200 kHz by itself if you have depth readout issues.
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL

  17. Member
    Join Date
    Apr 2012
    Location
    irvine, kentucky
    Posts
    16
    #757
    Thanks Wayne

  18. Member
    Join Date
    Apr 2020
    Location
    Bangor Maine
    Posts
    625
    #758
    Quote Originally Posted by Wayne P. View Post
    No difference. Combo was used with the number series units to indicate it was a combination of sonar and GPS. Just some of the ONIX units got that same designation. All ONIX units are sonar and GPS with internal GPS antennas.

    NT models are Non-Touch screens, just buttons. CT models are Cross-touch, buttons and touch screen.
    Thank you Wayne. Very helpful.

  19. Humminbird Moderator SLYDoggie's Avatar
    Join Date
    Aug 2015
    Location
    Franklin TN & Tims Ford Lake
    Posts
    3,849
    #759
    Somebody needs to either update the name of this thread to include "Solix" or start a new "Solix Information Resource" thread like exists for the Helix products. There hasn't been a post on this since April and it sure would cut down on all the various Solix threads.
    ---> Regards, Steve Yarbrough (AKA: SLYDoggieTN on YouTube)
    • Apex 19/16/13, Mega 360, and Mega Live
    • Minn Kota Ulterra Quest Trolling Motor
    • (2) Cannon Optimum Bluetooth Downriggers
    • Impulse Lithium Batteries... 36V 60AH for Trolling Motor, (2) 12V 120AH for Cranking & Electronics, 12V 60AH for Downriggers


  20. Member
    Join Date
    Sep 2007
    Location
    Elgin Il
    Posts
    217
    #760
    Hi Wayne : I know I'm behind the times, I have 2 Onix 8 units. Upgraded last week to 3.5 and now I don't have any readings for depth, temperature. Also it was following contour after upgrade but stopped and won't follow it anymore with my I pilot Terrova. Besides replacing, taking a hammer to it or burning it, do you have any suggestions?
    I only go out fishing for 3 to 4 hours a week, 16 weeks a year and really would like to fish instead of fixing units. So please if you can suggest a fix let me know.

    Ernie

Page 38 of 40 FirstFirst ... 283637383940 LastLast