Page 1 of 40 12311 ... LastLast
Results 1 to 20 of 781
  1. #1
    Member Doug Vahrenberg's Avatar
    Join Date
    Sep 2005
    Location
    Higginsville, MO
    Posts
    12,741

    Lightbulb Humminbird ONIX & ION Series Information Resource

    2014 Humminbird introduces the newest product offering featuring Cross-Touch Technology. Touch Screen and Buttons allowing the operator choice of how they control the unit.



    ONIX is an all-in-one system (Much like a Laptop Computer) Processors and Transmitters are built into the unit which allows the Transducer to be direct connected.



    ION is a black box style system (Much like a Desktop Computer) which allows the owner to choose the type of sonar box the owner wish to add to the ION Screen. The Sonar Black Box controls Transmission of the Sonar Data.













    --


    http://www.dougvahrenberg.com/

    BASS Central Open- Competitive Bass Angler and Humminbird Guru
    Visit my website to learn about my sponsor's products, fishing tips and techniques.

    Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/

  2. Member Doug Vahrenberg's Avatar
    Join Date
    Sep 2005
    Location
    Higginsville, MO
    Posts
    12,741
    #2
    2D Images from ONIX









    Bottom Track and Bottom Fill Enabled

    --


    http://www.dougvahrenberg.com/

    BASS Central Open- Competitive Bass Angler and Humminbird Guru
    Visit my website to learn about my sponsor's products, fishing tips and techniques.

    Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/

  3. Member Doug Vahrenberg's Avatar
    Join Date
    Sep 2005
    Location
    Higginsville, MO
    Posts
    12,741
    #3
    ONIX SI and DI





    --


    http://www.dougvahrenberg.com/

    BASS Central Open- Competitive Bass Angler and Humminbird Guru
    Visit my website to learn about my sponsor's products, fishing tips and techniques.

    Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/

  4. Member Doug Vahrenberg's Avatar
    Join Date
    Sep 2005
    Location
    Higginsville, MO
    Posts
    12,741
    #4
    GPS Diagnostics





    Operators Manual with 1.150 Software included on unit



    --


    http://www.dougvahrenberg.com/

    BASS Central Open- Competitive Bass Angler and Humminbird Guru
    Visit my website to learn about my sponsor's products, fishing tips and techniques.

    Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/

  5. Member Doug Vahrenberg's Avatar
    Join Date
    Sep 2005
    Location
    Higginsville, MO
    Posts
    12,741
    #5
    More DI from ONIX







    --


    http://www.dougvahrenberg.com/

    BASS Central Open- Competitive Bass Angler and Humminbird Guru
    Visit my website to learn about my sponsor's products, fishing tips and techniques.

    Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/

  6. Member Doug Vahrenberg's Avatar
    Join Date
    Sep 2005
    Location
    Higginsville, MO
    Posts
    12,741
    #6
    More SI Images









    --


    http://www.dougvahrenberg.com/

    BASS Central Open- Competitive Bass Angler and Humminbird Guru
    Visit my website to learn about my sponsor's products, fishing tips and techniques.

    Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/

  7. GROWING OLD WITH GRACE DA TOAD's Avatar
    Join Date
    Jul 2013
    Location
    Massachusetts
    Posts
    1,328
    #7
    Thanks for this Doug...I need it.
    A gun is like a parachute. If you need one, and don't have one, you'll probably never need one again.

    "Let's raise up our glasses against evil forces......Whiskey for my men, beer for my horses" - Toby Keith

  8. Member
    Join Date
    Jan 2013
    Location
    Frisco, TX
    Posts
    231
    #8
    Thanks Doug.

  9. GROWING OLD WITH GRACE DA TOAD's Avatar
    Join Date
    Jul 2013
    Location
    Massachusetts
    Posts
    1,328
    #9
    Got my new unit. Tried to update my product registration and couldn't as my serial number was not yet in the system. Called Customer service and they will take care of the registration.

    In preparation for my update today I asked about loading the software onto the SD cards. I asked if the software updates for the unit, the I-pilot link, and the I-pilot remote could all be on the same SD care or if they had to be on seperate SD cards. I was told on Monday that the software for the unit had to be alone on as card and the two software updates for the Ipilot link and the remote could be on the same card. Today I was told they all had to be either on seperate cards or I would do one update, clean the card, download another update, load that into the unit and repeat for the last update.

    Which customer service rep was right? What is they way you guys that have working units have been doing it.? Thanks.
    A gun is like a parachute. If you need one, and don't have one, you'll probably never need one again.

    "Let's raise up our glasses against evil forces......Whiskey for my men, beer for my horses" - Toby Keith

  10. Member
    Join Date
    Jan 2013
    Location
    Frisco, TX
    Posts
    231
    #10
    The serial number thing happens a lot. Tells you that unit was just made.

    I always do one update at a time, then format the sd card and load up the next one. I also restore defaults before and after just in case.

  11. GROWING OLD WITH GRACE DA TOAD's Avatar
    Join Date
    Jul 2013
    Location
    Massachusetts
    Posts
    1,328
    #11
    Quote Originally Posted by Diel11 View Post
    The serial number thing happens a lot. Tells you that unit was just made.

    I always do one update at a time, then format the sd card and load up the next one. I also restore defaults before and after just in case.
    When you restore the defaults does your unit go into initial set-up mode where you have to enter units, time, water temp etc. before you can go any farther? Both units I had did that and the I would get to the feared Navionics CONFIRM screen and unleash the dogs of hell. Have to keep going through initial set-up?
    A gun is like a parachute. If you need one, and don't have one, you'll probably never need one again.

    "Let's raise up our glasses against evil forces......Whiskey for my men, beer for my horses" - Toby Keith

  12. Member
    Join Date
    Jan 2013
    Location
    Frisco, TX
    Posts
    231
    #12
    Yes it does. If I remember correctly you can opt out of doing the initial set up so you can do the updating faster.

  13. Member
    Join Date
    Nov 2013
    Location
    Northeast
    Posts
    8
    #13
    Love the pics....glad your enjoying your unit

    Just fired up my new Onix on the lake today.

    Internal GPS not found........good thing I know my way around the lake.

    Called the customer service number that was provided on the manual....# did not work.

    so now I sit here trying not to come unglued on the fact that it is very clear...Humminbird was not quite ready to release this unit.

    ...... I spent this week re-wireing my boat for just more aggravation.

    Scott

  14. Member
    Join Date
    Feb 2008
    Location
    clarksville
    Posts
    10
    #14
    my onix did the same thing i took the navitrous map out of it and restated mine and the gps came back.

  15. Member
    Join Date
    Nov 2013
    Location
    Northeast
    Posts
    8
    #15
    No such luck.........unfortunately in my System info under internal GPS is says "not connected" . Honestly, don't they put these things through their paces before they box and ship. Apparently Not!

  16. Skeeterboy1
    Join Date
    Jan 2007
    Location
    Cameron, Wisconsin
    Posts
    724
    #16
    My unit was working great today then my side imaging stopped working
    <')))><

  17. Member
    Join Date
    Jan 2013
    Location
    Frisco, TX
    Posts
    231
    #17
    Quote Originally Posted by iScott View Post
    Love the pics....glad your enjoying your unit

    Just fired up my new Onix on the lake today.

    Internal GPS not found........good thing I know my way around the lake.

    Called the customer service number that was provided on the manual....# did not work.

    so now I sit here trying not to come unglued on the fact that it is very clear...Humminbird was not quite ready to release this unit.

    ...... I spent this week re-wireing my boat for just more aggravation.

    Scott
    This I haven't seen on mine. Pull your nav chip and restore defaults and see what happens.

  18. Member
    Join Date
    Jan 2013
    Location
    Frisco, TX
    Posts
    231
    #18
    Quote Originally Posted by Skeeterboy1 View Post
    My unit was working great today then my side imaging stopped working
    Did it freeze up or did the screen turn gray? Were you using it on a multi pane view or just on SI? Do you remember what frequency your 2D was running on?

  19. GROWING OLD WITH GRACE DA TOAD's Avatar
    Join Date
    Jul 2013
    Location
    Massachusetts
    Posts
    1,328
    #19
    Now I am dreading getting mine out on the water Monday for the first time.
    A gun is like a parachute. If you need one, and don't have one, you'll probably never need one again.

    "Let's raise up our glasses against evil forces......Whiskey for my men, beer for my horses" - Toby Keith

  20. Member
    Join Date
    Nov 2013
    Location
    Northeast
    Posts
    8
    #20
    Quote Originally Posted by Diel11 View Post
    This I haven't seen on mine. Pull your nav chip and restore defaults and see what happens.

    Pulled the chip and re-started unit on the water when I first noticed I wasn't getting any response from my GPS. When I first fired up the unit in the boat house with no chip installed during the week, I wasn't getting any GPS response. I didn't think much of it at the time because I was in the boat house, and figured the roof over my head was preventing a connection.

Page 1 of 40 12311 ... LastLast