Thanks
Thanks
1199ci HD SI (Version 7.790)
Release Date: 12/20/2016
Description: New Features
Added support for Minn Kota’s New Bluetooth i-Pilot Link motors.
General Fixes
Fixed a bug where affected models would not detect the RX AIS.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
999ci HD SI Combo (Version 7.790)
Release Date: 12/20/2016
Description: New Features
Added support for Minn Kota’s New Bluetooth i-Pilot Link motors.
General Fixes
Fixed a bug where affected models would not detect the RX AIS.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
899ci HD SI (Version 7.790)
Release Date: 12/20/2016
Description: New Features
Added support for Minn Kota’s New Bluetooth i-Pilot Link motors.
General Fixes
Fixed a bug where affected models would not detect the RX AIS.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
859ci HD (Version 7.790)
Release Date: 12/20/2016
Description: New Features
Added support for Minn Kota’s New Bluetooth i-Pilot Link motors.
General Fixes
Fixed a bug where affected models would not detect the RX AIS.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Thanks Wayne!
Robert
Newaygo CTY, MI
Helix12MSI G2N v1.84/Helix10MSI G2N v1.84/Helix10MDI G2N v1.84/ASGPSHSx2/iPilotLinkv2.15/2.04RC-1+2/
Great to see continued support for Gen minus 2 CORE units!!!!
Jimmy Young
2021 Nitro Z19
Mercury 200 ProXS
Atlas 10" Hydraulic Jackplate
Humminbird HELIX 12 CHIRP MEGA SI+ GPS G4N
Humminbird HELIX 8 CHIRP MEGA SI GPS G3N
Humminbird HELIX 12 CHIRP MEGA DI+ GPS G4N at bow
Humminbird HELIX 8 CHIRP MEGA DI GPS G3N CHO at bow
Humminbird MEGA 360
Minn Kota Ultrex i-Pilot Link
Dual Power Pole Blades
Last update for sure!
Robert
Newaygo CTY, MI
Helix12MSI G2N v1.84/Helix10MSI G2N v1.84/Helix10MDI G2N v1.84/ASGPSHSx2/iPilotLinkv2.15/2.04RC-1+2/
HumminbirdPC (Version 4.5.5)
Release Date: 12/02/2016
Description:
Version 4.5.5 - Adds support for the following new models
HELIX 12 CHIRP MEGA SI GPS G2N
HELIX 12 CHIRP DI GPS G2N
HELIX 12 CHIRP GPS G2N
HELIX 10 CHIRP MEGA SI GPS G2N
HELIX 10 CHIRP DI GPS G2N
HELIX 10 CHIRP GPS G2N
HELIX*9 CHIRP MEGA SI GPS G2N
HELIX*9 CHIRP DI GPS G2N
HELIX*9 CHIRP GPS G2N
HELIX 7 CHIRP SI GPS G2N
HELIX 7 CHIRP SI GPS G2
HELIX 7 CHIRP DI GPS G2N
HELIX 7 CHIRP DI GPS G2
HELIX 7 CHIRP GPS G2N
HELIX 7 CHIRP GPS G2
HELIX 7 CHIRP DI G2
HELIX SONAR G2
HELIX 7 GPS G2
HELIX*5 CHIRP SI GPS G2
HELIX 5 CHIRP DI GPS G2
HELIX 5 CHIRP GPS G2
HELIX 5 DI G2
HELIX 5 SONAR G2
HELIX 5 GPS G2
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Helix 10si with autochart and lakemaster chips. I did the update last night and now the only options for map cards are auto or contour xd. Is that correct or was there a problem with my update? It used to show both cards, auto and contour xd. Thanks for any help
Autochart Standard (Version 2.100)
Release Date: 03/10/2017
Description:
Key Feature:
· Support for new AutoChart Live data format – Adds import/edit/export support for AutoChart Live files.
Other Features:
· Retrieval of absolute time stamp from .dat file – Adds support for referencing the correct time-stamp information
during data import of .dat files.
· Added support for new Humminbird data recording format – As a result of various development efforts in regards
to AutoChart Live and the introduction of the new SOLIX™ Series the sonar recording format was updated to a
newer version.
· Added an Operations guide shortcut to the help menu – previously, the Operations guide could only be launched
from Windows Explorer. It can now be launched through the Help Menu and is opened inside an AutoChart Live PDF
viewer.
· Updated Help File
General Fixes:
· Fixed an issue with UTM to Lat/Lon conversion
· Fixed waypoint synchronization between panes
· Adjusted frame synchronization between sonar data panes
· Removed MapQuest support from background maps (no longer available)
Prerequisite:
Must own AutoChart or AutoChart Pro and have it installed on your PC or laptop.
Instructions:
1. If you have not already done so, install the original AutoChart program from the DVD. If you have already
installed the DVD files, go to Step 2.
2. Once completed, save this update to your desktop or one of your common drives
3. Run this executable file which will update the program previously installed from the DVD.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Robert
Newaygo CTY, MI
Helix12MSI G2N v1.84/Helix10MSI G2N v1.84/Helix10MDI G2N v1.84/ASGPSHSx2/iPilotLinkv2.15/2.04RC-1+2/
ONIX (Version 3.000)
Release Date: 03/14/2017
Description:
Please see this linked FAQ for full details.*
Prerequisite:
working SD reader/writer device
attached to your PC and
a formatted SD card (minimum size 4GB, class 6, maximum 32GB)
This file contains software for the following items:
ONIX unit software
AS 360*Imaging software
i-Pilot Link controller software
i-Pilot Link remote software
SM1000 software (remote sonar modular)
SM2000 software (remote sonar modular)
SM3000 software*(remote sonar modular)
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
FAQ for ONIX 3.000
Affected Models:
ONIX 10ci SI
ONIX 10ci
ONIX 10ci SI NT
ONIX 10ci NT
ONIX 8ci SI
ONIX 8ci
ONIX 8ci SI NT
ONIX 8ci NT
All ONIX CP (Chartplotter)*
*ION 12
ION 10
If you have an affected model and want to upgrade to software release 3.000 you must first be using version 2.000 or higher. If you have a version prior to 2.000, there is still a copy of 2.000 available in your myhumminbird.com account that youwill need to upgrade too first.
Unless 2.700 or later is already installed, upgrades to 3.000 must be performed in normal mode. *If performed in simulator mode with software older than version 2.700, the update will not complete and will have to be reattempted.
*
Key Features:
While there are many improvements to your user experience and operability foundwithin software release 3.000, a few critical improvements to help youron-the-water fishing experience include:
Chart more detail inAutoChartŪLive with Vegetation and Bottom Hardness mapping; Follow contours
In addition to depth contour mapping found within AutoChart Live, you will now beable to map added layers for an enhanced fishing experience.
Bottom Hardness - Now the detail goes deeper. AutoChart Live uses sonar to measure andchart bottom hardness, tipping you off to likely hotspots.
Vegetation- The weed line can no longer hide. With help from your sonar beam, AutoChartLive can now instantly map weeds, brush and other vegetation.
Spend less time positioning your boat and more time fishing when you "Follow" newly created depth, vegetation or hardness contours hands free with your compatible Minn Kota trolling motor with i-Pilot Link.
Above - Vegetation mapping
"Follow: will identify contour lines and guide i-Pilot Link equipped Minn Kota trolling motors. *
Below *- Bottom Hardness mapping
OTHER FEATURES:
ONIX will be able to network with new SOLIX™ Series models, as well as view MEGA Imaging™ on the screen provided a MEGA-enabled SOLIX transducer is the primary unit.
Switchfire has now been added to Side ImagingŪ and Down ImagingŪ sonar
2D Sonar Contrast - Use Contrast to adjust the color range of any 2D color palletto dial-in clarity and detail.
2D Contrast - set to factory default (20)
2D Contrast - set to 40
2D Contrast set to 1
Pressing and holding the "check" key now quickly changes frequency on 2D, Side ImagingŪ,and Down ImagingŪ
The encoder knob now changes sensitivity on 2D, Side ImagingŪ, Down ImagingŪ, and360 ImagingŪ
The+/- keys now change range on Side Imaging unless the cursor is active, in whichcase the user will get a Side Imaging Zoom Cursor
I-PilotŪLink™ and Minn KotaŪ BluetoothŪ enabled motor support
I-PilotŪLink™ X-Press Remote
I-PilotŪLink™ Circle Mode
I-PilotŪLink™ Jog Spot-Lock
Humminbird HB 2124 CHIRP RADAR support
Added support for multi-layer/lake ChartSelect™ cards
Added new options to Standby Mode:
All sonar off (Default)
All sonar on
2D sonar off; Down Imaging and Side Imaging sonar on
Voltage readout overlay on Chart, 2D, Side Imaging, Down Imaging, and 360 Imaging
Updates to UI and menus:
New touch targets at the top of each view on the menu bar to assist with quickersettings changes
New X-Press menu shortcuts to assist with quicker settings changes
Re workof several tool locations on the Home Screen
Increase the font size of the COG and Heading lines
Angler and Custom Modes:
Angler Mode keeps the non-day-to-day menu items out of the way
Custom Mode enables features that are typically set and then rarely adjusted again
Added GLONASS support
*
Below is a summary of improvements available in software release 3.000 that specifically address concerns from*software version 2.700 users:
AIS
Corrected an issue where vessels with call-signsthat included a "/" were not displaying correctly
Corrected an issue where NMEA 2000 AIS devices werenot updating the Vessel Type and Icon
Corrected an issue where readouts in the AIS list'sbearing column were not updating
Corrected an issue where AIS icons would not displayon C-MAP after switching from Humminbird or Navionics chart types
AUTOCHART™/ AUTOCHART™ LIVE
Fixed an issue with UTM to LL conversions with datacreated on AutoChart PC and AutoChart Live
Fixed a metric rounding issue with AutoChart Live
CHART
Fixed an issue where Water Level Offset would causelarge portions of LakeMasterŪ contours to disappear
Fixed an issue where the boat icon could disappearwhile using Vessel Offset on Navionics
Fixed a Navionics Chart crash caused by changingviews
i-PILOTŪLINK™
Fixed an issue where FTC could not be conducted on LakeMasterŪ data if there was a hidden AutoChart Live layer present
NMEA2000
Fixed several NMEA 2000 compatibility issues withnon-conforming, third party, NMEA 2000 devices
SONAR
Fixed an issue where network sonar sources were not graying out when they were lost
Fixed an issue where the cursor would be incorrectlyactivated when a 2D Sonar pane was touched to make it the active pane
Fixed an issue where 2D sonar would crash if theSonar Mode was changed while Bottom Line was turned on
Fixed an issue where CHIRP Off and FrequencySpectrums would not be remembered between restarts while transducer detect wasin Auto Mode
Fixed an issue where Sonar On/Off states would notbe remembered between restarts while transducer detect was in Auto Mode
Fixed an issue where Max Depth settings would not beremembered between restarts while transducer detect was in Auto Mode
Fixed an issue where the default color palette wouldbriefly appear after changing to a sonar view with a non-default color palette selected
Fixed several issues with Fish ID detection and display
Fixed an issue where DI Contrast settings would notbe remembered between restarts
Fixed an issue where SI Manual range setting wouldnot be remembered between restarts
Fixed an issue where a waypoints location on thedisplay would not be correctly offset while Side Imaging was in Left or Right Display Mode
SYSTEM
Fixed several failure to boot issues
Fixed several issues where back end messages could appear
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Nice...
I bet you'll be testing the fish ID Wayne!
Robert
Newaygo CTY, MI
Helix12MSI G2N v1.84/Helix10MSI G2N v1.84/Helix10MDI G2N v1.84/ASGPSHSx2/iPilotLinkv2.15/2.04RC-1+2/
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Glad to see they seem to have put a lot of effort into this update. I like my Onix units, and glad I made the decision not to get rid of them for a Mega unit. Maybe next year on a Mega unit. I'm also fortunate not to have experienced issues like some have had with the Onix. My upgrade this year will probably be a new Ultrex w/i-pilot link.
FirstSergeantUSAF
Jet Noise, The Sound of Freedom
Robert
Newaygo CTY, MI
Helix12MSI G2N v1.84/Helix10MSI G2N v1.84/Helix10MDI G2N v1.84/ASGPSHSx2/iPilotLinkv2.15/2.04RC-1+2/
I'm getting ready to install the update and I also hope the fish ID has been fixed one of my favorite features, well here goes.....
A poster stated that he couldn't import menu settings after the update, is this true? Mine is the international model and it would be really nice to be able to do so.