Page 7 of 26 FirstFirst ... 5678917 ... LastLast
Results 121 to 140 of 503
  1. Bringer Of The 'Bird sfw1960's Avatar
    Join Date
    Mar 2010
    Location
    White Cloud, MI
    Posts
    3,881
    #121
    Call them on Tuesday if you can.

    They can help get your serial numbers straight, generally I use Firefox and had no issues setting up new units.
    Chrome is another web browser that works well.

    Microshaft browsers have been troublesome at times.
    Robert
    Newaygo CTY, MI
    Helix12MSI G2N v1.84/Helix10MSI G2N v1.84/Helix10MDI G2N v1.84/ASGPSHSx2/iPilotLinkv2.15/2.04RC-1+2/


  2. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,308
    #122
    HELIX 12 CHIRP DI GPS (Version 1.350) Part 1 of two parts
    Release Date: 12/03/2016
    Description:
    New Features:
    Adds networking support with the NEW HELIX 7, 9, 10 and 12 G2N models.
    Shares waypoints, routes and tracks
    Shares 83/200/455/800 kHz along with 50 kHz and Low Medium and High CHIRP (optional transducers required). Does not share 1.2 MHz (MEGA)
    Added new layers for AutoChart Live
    You can now create maps showing Bottom Hardness to show possible hotspots
    You can also show Vegetation so the weedline can no longer hide.
    Added support for Minn Kota’s NEW Ultrex and NEW i-Pilot Link with it’s Bluetooth remote.
    Added Circle Mode
    Added Follow-the-Contour functionality for AutoChart Live’s new Bottom Hardness and Vegetation layers
    Added a virtual remote
    Added a power button remote
    Added Imaging SwitchFire for all HELIX units
    Added Chart/DI/2D Combo View
    Added Contrast to 2D SONAR
    Added CHIRP Configuration menu under the Setup tab
    Changed Snapshot Functionality
    Snapshots are now captured by using Mark (Press & Hold)
    Taking a snapshot will no longer laydown a waypoint unless you turn on Screen Snapshot Waypoint under the Accessory Tab
    Added keypad shortcuts to 2D and DI Views to adjust Frequency and Sensitivity.
    The Check Key now changes Frequency.
    The +/- Keys now adjust Sensitivity.
    Added Mark Menu
    Pressing Mark with an active cursor will now bring up a new menu which gives the user the option to mark a waypoint at the cursor or mark a waypoint at the vessel position
    You can also double press Mark to quickly lay down a waypoint at the cursor
    Added Navigation Menu
    All navigation events will now be listed under the Go-To menu.
    If you press Go-To without an active cursor it will bring up the Go-To menu with an option to go through the Nav Data and select a route or waypoint to navigate too.
    If you press Go-To with an active cursor it will bring up the Go-To menu with two options, Go-To Position and Nav Data.
    If you press Go-To while highlighting a route it will bring up the Go-To menu with different options for navigating the route as well as the option to navigate to the cursor and the option to go through the Nav Data to select a waypoint or another route to navigate too.
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL

  3. Member
    Join Date
    Dec 2004
    Location
    Bridgewater, NS
    Posts
    2,636
    #123
    HELIX 10 SONAR GPS (Version 1.350)
    Release Date: 12/03/2016
    Description:

    New Features:

    · Adds networking support with the NEW HELIX 7, 9, 10 and 12 G2Nmodels.
    o Shares waypoints, routes and tracks
    o Shares 83/200/455/800 kHz along with 50 kHz and Low Medium and High CHIRP (optional transducers required) (Units shared dependent). Does not share 1.2 MHz(MEGA)
    · Added new layers for AutoChart Live
    o You can now create maps showing Bottom Hardness to show possible hotspots
    o You can also show Vegetation so the weedline can no longer hide.
    · Added support for Minn Kota’s NEW Ultrex and NEW i-Pilot Link with it’s Bluetooth remote.
    o Added Circle Mode
    o Added Follow-the-Contour functionality for AutoChart Live’s new Bottom Hardness and Vegetation layers
    o Added a virtual remote
    o Added a power button remote
    · Added Contrast to 2D SONAR
    · Added CHIRP Configuration menu under the Setup tab
    · Changed Snapshot Functionality
    o Snapshots are now captured by using Mark (Press & Hold)
    o Taking a snapshot will no longer laydown a waypoint unless you turn on Screen Snapshot Waypoint under the Accessory Tab
    · Added keypad shortcuts to the Sonar View to adjust Frequency and Sensitivity.
    o The Check Key now changes Frequency.
    o The +/- Keys now adjust Sensitivity.
    · Added Mark Menu
    o Pressing Mark with an active cursor will now bring up a new menu which gives the user the option to mark a waypoint at the cursor or mark a waypoint at the vessel position
    o You can also double press Mark to quickly lay down a waypoint at the cursor
    · Added Navigation Menu
    o All navigation events will now be listed under the Go-To menu.
    o If you press Go-To without an active cursor it will bring up the Go-To menu with an option to go through the Nav Data and select a route or waypoint to navigate too.
    o If you press Go-To with an active cursor it will bring up the Go-To menu with two options, Go-To Position and Nav Data.
    o If you press Go-To while highlighting a route it will bring up the Go-To menu with different options for navigating the route as well as the option to navigate to the cursor and the option to go through the Nav Data to select a waypoint or another route to navigate too.
    · Added Base Layer & Overlay Menus to Humminbird Chart Tab
    o These menus will only populate if you have a LakeMaster chart card that supports multiple layers. (LakeMaster Plus, ChartSelect, and ZeroLine cards)
    o The default Base Layer will be a Satellite image. If multiple satellite images exist it will choose the latest image.
    o The default Overlay will be the 2D map.
    o Changing any of the defaults will add a menu called Base/Overlay Reset which will reset the Base Layer and Overlay to their default settings.
    · Added Standby Mode
    o The Standby menu is located in the Power menu and when the unit is put into standby mode the display will turn off, and sonar will stop pinging.
    o Press the power button to bring the unit out of Standby mode. The unit will not react to any other key presses while in Standby mode.
    · Added support for the HB 2124 CHIRP RADAR
    · Added new NMEA 2000 Vessel readouts
    o Fuel (Dist)
    o Fuel (Time)
    o Total Fuel
    o Fuel Econ
    o Trip Fuel
    · Updated the Network Source Setup screen for the MEGA SI transducer
    o We now have individual tabs for 2D, DI, and SI sources

    General Fixes:

    · Fixed issue where LakeMaster card names were not correct in the GPS Diagnostic View
    · Fixed issue where units were restarting if a LakeMaster and ZeroLine card are inserted at the same time.
    · Fixed issue where units were restarting when more than one SD card is inserted and then one of them is removed.
    · Fixed issue when two ZeroLine cards are inserted and one card is removed, causing the removal warning message to appear, if the second card is removed before the message clears then the message will never clear.

  4. Member
    Join Date
    Dec 2004
    Location
    Bridgewater, NS
    Posts
    2,636
    #124

    12 No.1

    HELIX 12 CHIRP SI GPS (Version 1.350)

    could not delete post, delete please Moderator if you can
    Last edited by Mark Weare; 12-04-2016 at 01:18 PM.

  5. Member
    Join Date
    Dec 2004
    Location
    Bridgewater, NS
    Posts
    2,636
    #125
    HELIX 12 CHIRP SI GPS (Version 1.350)
    Release Date: 12/03/2016


    Description:
    New Features:

    · Adds networking support with the new HELIX 7, 9, 10 and 12 G2N models.
    o Shares waypoints, routes and tracks
    o Shares 83/200/455/800 kHz along with 50 kHz and Low Medium and High CHIRP (optional transducers required). Does not share 1.2 MHz (MEGA)
    · Added new layers for AutoChart Live
    o You can now create maps showing Bottom Hardness to show possible hotspots
    o You can also show Vegetation so the weedline can no longer hide.
    · Added support for Minn Kota’s NEW Ultrex and NEW i-Pilot Link with it’s Bluetooth remote.
    o Added Circle Mode
    o Added Follow-the-Contour functionality for AutoChart Live’s new Bottom Hardness and Vegetation layers
    o Added a virtual remote
    o Added a power button remote
    · Added Imaging SwitchFire for all HELIX units
    · Added a stacked Left Side/Right Side Combo View
    · Added Chart/Side/2D Combo View
    · Added Chart/DI/2D Combo View
    · Added Contrast to 2D SONAR
    · Added CHIRP Configuration menu under the Setup tab
    · Changed Snapshot Functionality
    o Snapshots are now captured by using Mark (Press & Hold)
    o Taking a snapshot will no longer laydown a waypoint unless you turn on Screen Snapshot Waypoint under the Accessory Tab
    · Added keypad shortcuts to 2D, DI, and SI Views to adjust Frequency and Sensitivity.
    o The Check Key now changes Frequency.
    o The +/- Keys now adjust Sensitivity.
    · Added Mark Menu
    o Pressing Mark with an active cursor will now bring up a new menu which gives the user the option to mark a waypoint at the cursor or mark a waypoint at the vessel position
    o You can also double press Mark to quickly lay down a waypoint at the cursor
    · Added Navigation Menu
    o All navigation events will now be listed under the Go To menu.
    o If you press Go To without an active cursor it will bring up the Go To menu with an option to go through the Nav Data and select a route or waypoint to navigate too.
    o If you press Go To with an active cursor it will bring up the Go To menu with two options, Go To Position and Nav Data.
    o If you press Go To while highlighting a route it will bring up the Go To menu with different options for navigating the route as well as the option to navigate to the cursor and the option to go through the Nav Data to select a waypoint or another route to navigate too.
    · Added Base Layer & Overlay Menus to Humminbird Chart Tab
    o These menus will only populate if you have a LakeMaster chart card that supports multiple layers. (LakeMaster Plus, ChartSelect, and ZeroLine cards)
    o The default Base Layer will be a Satellite image. If multiple satellite images exist it will choose the latest image.
    o The default Overlay will be the 2D map.
    o Changing any of the defaults will add a menu called Base Overlay Reset which will reset the Base Layer and Overlay to their default settings.
    · Added Standby Mode
    o The Standby menu is located in the Power menu and when the unit is put into standby mode the display will turn off, and sonar will stop pinging.
    o Press the power button to bring the unit out of Standby mode. The unit will not react to any other key presses while in Standby mode.
    · Added support for the HB 2124 CHIRP RADAR
    · Added new NMEA 2000 Vessel readouts
    o Fuel (Dist)
    o Fuel (Time)
    o Total Fuel
    o Fuel Econ
    o Trip Fuel
    · Updated the Network Source Setup screen for the MEGA SI transducer
    o We now have individual tabs for 2D, DI, and SI sources
    o The composite DI source will not populate under the DI tab until the corresponding SI source has been selected
    o We will no longer support composite DI f r o m the 360. It can still be used as a SI source.

    General Fixes:

    · Fixed issue where LakeMaster card names were not correct in the GPS Diagnostic View
    · Fixed issue where units were restarting if a LakeMaster and ZeroLine card are inserted at the same time.
    · Fixed issue where units were restarting when more than one SD card is inserted and then one of them is removed.
    · Fixed issue when two ZeroLine cards are inserted and one card is removed, causing the removal warning message to appear, if the second card is removed before the message clears then the message will never clear.

  6. Member Ralbertina's Avatar
    Join Date
    Apr 2013
    Location
    St.louis
    Posts
    179
    #126
    Does the new update address the issue of not being able to share sonar when a Helix 12 and Helix 10 unit are interlinked (using the Helix 12 transducer) unless the chirp function is turned off?

  7. Member
    Join Date
    Feb 2014
    Location
    FTW Texas
    Posts
    2,416
    #127
    Quote Originally Posted by Ralbertina View Post
    Does the new update address the issue of not being able to share sonar when a Helix 12 and Helix 10 unit are interlinked (using the Helix 12 transducer) unless the chirp function is turned off?

    no,

  8. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,308
    #128
    Quote Originally Posted by ntslam View Post
    no,
    What does the third item in the New Features list mean after 50 kHz ?
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL

  9. Member
    Join Date
    Jun 2013
    Location
    Hemet, CA
    Posts
    4,653
    #129
    I thought that was confirmed by ntslam with HB CS to mean everything except MEGA imaging could be shared in another post?
    Wes
    Helix 10 MSI+,MDI+,Ultrex IPilot
    2023 Phoenix 818
    Never assume there's a tomorrow

  10. Member
    Join Date
    Feb 2014
    Location
    FTW Texas
    Posts
    2,416
    #130
    Quote Originally Posted by Wayne P. View Post
    What does the third item in the New Features list mean after 50 kHz ?

    I am done drinking beer for the night cant multitask while beer in hand

  11. Member
    Join Date
    Jun 2013
    Location
    Hemet, CA
    Posts
    4,653
    #131
    ........
    Wes
    Helix 10 MSI+,MDI+,Ultrex IPilot
    2023 Phoenix 818
    Never assume there's a tomorrow

  12. Bringer Of The 'Bird sfw1960's Avatar
    Join Date
    Mar 2010
    Location
    White Cloud, MI
    Posts
    3,881
    #132

    Helix 9-10-12 G2 v1.35

    Robert
    Newaygo CTY, MI
    Helix12MSI G2N v1.84/Helix10MSI G2N v1.84/Helix10MDI G2N v1.84/ASGPSHSx2/iPilotLinkv2.15/2.04RC-1+2/


  13. Member Bob B's Avatar
    Join Date
    Nov 2010
    Location
    Creve Coeur, IL
    Posts
    2,914
    #133
    Key Phrase :
    • Please note: MEGA Imaging will not share between a G2N and G1 model. MEGA Imaging is a technology and is made feasible by a MEGA-equipped transducer. MEGA Imaging cannot be obtained simply by a software update.
    __________________________________________________ ___

    **Looking for the one that makes it all worthwhile**
    __________________________________________________ ___

    Units ..... 1197 (6.310) ...1198 (6.490) ... Helix 12 MSI G3N

  14. Member
    Join Date
    Sep 2015
    Location
    IL
    Posts
    288
    #134
    Maybe I missed it but, with the above ^^^ being said, can MEGA imaging be shared between a SI G2N model and a DI G2N model? If not, would the 800 KHz SI share with the DI G2N, thanks
    Last edited by cards21; 12-11-2016 at 06:04 PM.

  15. Member
    Join Date
    Jun 2013
    Location
    Ms
    Posts
    401
    #135
    I have 2 helix 10 di's and 1 helix 10 si. Can i update all 3 units from the same card?
    Paul


  16. Bringer Of The 'Bird sfw1960's Avatar
    Join Date
    Mar 2010
    Location
    White Cloud, MI
    Posts
    3,881
    #136
    The DI & SI software are different and are specific to each unit.
    Download both, put the DI update on your SD Card - update both DI units - then delete the DI update, copy the SI update to the SDC and do the SI unit.

    Reset the defaults before & after on each machine.
    Robert
    Newaygo CTY, MI
    Helix12MSI G2N v1.84/Helix10MSI G2N v1.84/Helix10MDI G2N v1.84/ASGPSHSx2/iPilotLinkv2.15/2.04RC-1+2/


  17. Member
    Join Date
    Jun 2013
    Location
    Ms
    Posts
    401
    #137
    Thanks bud. For some reason my di units are not recognizing update when sd card is inserted. Computer says update is on the card. Erased it and trying again. Only thing that has ever been on the card in question is the last helix update, which i deleted before i saved this one on it. Any ideas?
    Paul


  18. Bringer Of The 'Bird sfw1960's Avatar
    Join Date
    Mar 2010
    Location
    White Cloud, MI
    Posts
    3,881
    #138
    Replying to other thread Paul ...
    Robert
    Newaygo CTY, MI
    Helix12MSI G2N v1.84/Helix10MSI G2N v1.84/Helix10MDI G2N v1.84/ASGPSHSx2/iPilotLinkv2.15/2.04RC-1+2/


  19. Member
    Join Date
    Oct 2015
    Location
    Paducah, KY
    Posts
    4
    #139
    With the 1.350 update is a G1 Helix 10 DI chirp capable

  20. Bringer Of The 'Bird sfw1960's Avatar
    Join Date
    Mar 2010
    Location
    White Cloud, MI
    Posts
    3,881
    #140
    NO.

    The only Chirp capable G1's are the Helix 12 Chirp Sonar/DI/SI GPS models.
    Robert
    Newaygo CTY, MI
    Helix12MSI G2N v1.84/Helix10MSI G2N v1.84/Helix10MDI G2N v1.84/ASGPSHSx2/iPilotLinkv2.15/2.04RC-1+2/


Page 7 of 26 FirstFirst ... 5678917 ... LastLast