I'm looking to get new bearings for my 2005 EZ Loader Skeeter Trailer. The bearings listed on the EZ Loader site are $65 per axle. Seems a bit pricey to have to buy $130 worth of wheel bearings for two axles.
EZ Loader Custom Boat Trailer Parts and Accessories
Does any one have an alternate site to buy these in kits or individually?
What size are the bearings, seals and races?
Thanks
If they are Timken made in USA, that aint too bad. Lot of places are cheap, but they are cheap china brgs.
bill if you pull the bearings and get a number off of them , you can easily get new ,quality bearings and races from local auto parts or on internet for reasonable price,,,,$130 sounds high to me
Joe,Originally Posted by jomo924
That's the easy way. The boat is in storage and I wanted to get the bearings before I took it out. I would prefer not to have the trailer up on jack stands and start running around trying to find bearings.
If anyone has the bearing, race and seal ID numbers, it would be most appreciated.
PS.....I almost went an purchased them through EZ Loader until I found out shipping was another $12. $77 is insane for bearings
L68149 with L68110 race on the inner, L44649 with L44610 race on the outer.
Thanks DABS. I appreciate the help. Would you happen to know the number of the bearing seal?
2005 would be NOK # AD2528E
Mine is a 2003 and all the bearing numbers are the same as listed by dabs but my seal is 171255tb
Got mine at NAPA last year I think they were around 20 to 25 bucks each not cheap ,but good quilty ones.
BIG BASS
Thanks DABS
I just replaced my 2011 fx21 vault hub bearings for skeeter ez loader dual axle. Got the vault grease and bearings and new end cap for around $90 for one hub. Then I replaced my hub new for around $90 as well. All thru dealer
bearings = $30
Vault end cap = $30
Vault grease = $20 ish
out door $91
Last edited by Bassfreak167; 03-16-2017 at 03:15 AM.
Reply With Quote