2018 Phoenix 21 PHX
2017 Mercury Optimax 250
2 10ft Power Pole Blades
Atlas Hydraulic Plate
Fury 4 25p
5800-5900 RPM
71MPH sustained fully loaded
73.5 Best speed solo
IMG_1843.JPG
2018 Phoenix 21 PHX
2017 Mercury Optimax 250
2 10ft Power Pole Blades
Atlas Hydraulic Plate
Fury 4 25p
5800-5900 RPM
71MPH sustained fully loaded
73.5 Best speed solo
IMG_1843.JPG
2018 921 Pro XP
250 SHO
2 8ft Blades
Atlas Hydraulic
5 Batteries
25 T2
5950 RPM
75mph best run with just me little over half tank of gas and fishing tackle
72mph best run with me and partner same gas and tackle
2017 Phoenix PHX 21
250 SHO 27 4-blade Bravo 1 FS prop
74 MPH @ 5900 RPMS
twin poles dual console
Atlas jack plate running the plate up around 17 (about 2.75" below pad) and very little trim.
Hole shot is amazing. I was running a Yamaha T2 3 blade 25 pitch which got 6100 rpms and same speed but the hole shot was terrible and she chine walked a lot! I might go to a 4-blade 26 Bravo 1 FS to see if I can up the rpms and pick up some speed.
Absolutely love this beast of a boat!!!
Update with a different prop and will probably update again once I finish dialing it in
2018 721
No poles, ultrex, 360, stacked bow graphs, manual plate
250 SHO 27 bravo xs(holes plugged)
2 guys, 30 gal fuel, 60 degree air, 78.6.
2 guys, 45ish gal fuel, full wells plus fish, 65 degree air, 75.3@6050
2018 Phoenix 920 / Mercury 250R
2018 921 250 pro Xs 2 stroke 3in ptp 24 fury. Light load 1/2 tank 69 maybe on a good day HONEST number... anyone that claims 75mph +with this same motor .....I call this bullshit I want to see the video.
2015 618 Pro
175 Pro XS 2 stroke
24P Tempest Plus
10" manual plate, 3.375 PTP, 15+ PSI water pressure ~5800 RPMs
24V Ultrex
65 MPH with normal tackle and my 9 year old son, no poles/Talons. When I picked the boat up a couple of weeks ago the motor was way too low. I raised to the 3.375 based off of similar setups I found here. A couple of guys are getting more speed. My prop looks a little dinged up, so I might get it worked a bit. Overall I'm happy. Boat rides great and is very easy to drive at top speed. Any ideas to improve or increase performance are welcomed!
There is no Pad on my PHX??
Updated 4/27/21
Boat and motor: 2018 920 ProXP with 250 ProXS
Power Poles/Talon: 2-8ft Poles
Prop Type/Blades: 25 Fury 3
JackPlate: Atlas ran at 16
RPMS: 5800-5900
Speed: 75.9 GPS
5 acid batteries
1/2 tank, normal tournament load
Last edited by IronAngler; 04-27-2021 at 02:47 AM. Reason: updating
Boat and motor: 920 Elite/Mercury Pro XS 250 4 Stroke
Power Poles/Talon:No
Prop Type/Blades:Fury 24 three blade
Prop to Pad Height: 3 1/4"
JackPlate:Atlas Hydraulic running at 13 on gauge
RPMS:5850
Speed:sustained 75.4
I have seen 77.2 but that was with the current on Pickwick. I have run against the current on Wilson at a touch over 75 for sustained amounts of time.
Last edited by Coach; 06-15-2020 at 04:08 PM.
2020 921 pro with 2020 300R
no poles / no talons
lithium Battery's
12 inch hydro bobs
little over half a tank
fishing gear loaded / live wells empty
26 tempest plus prop 6350 rpm
81.3 mph 5hrs on motor
2014 920/SHO
Last edited by 721Proxs; 09-21-2020 at 01:16 PM.
Jimmy
Phoenix 721
12" Bobs Hydro Plate
Mercury 300 Xs
Dave Bush Racing Kit
28.5 Bravo
I ran 80.2 last weekend with a full tank of fuel, full tackle, 2-12ft Talons with a 28.5 Bravo...Temp was around 90 and humidity about 80%. My JP gauge is not working so I wasn't really able to play with it, I just set it on 3 and made a pass..New gauge will be here this week.
Jimmy
Phoenix 721
12" Bobs Hydro Plate
Mercury 300 Xs
Dave Bush Racing Kit
28.5 Bravo
2021 919 Pro xp 225 merc ,Atlas jack, 2 Raptors, 3 100ah Ionics,24 fury 3, full tank and loaded for break in. After my 2 hr break in run popped her up to 75 at 5400 rpm. I was surprised by the quick throttle response. Coming out of 3 Z520s over the last 8 years, its nice to have a runner. Can't wait to really air it out to see true numbers.
2021 818 Pro
2021 Merc ProXs 175
23P tempest
Dual Power Poles
manual Jackplate at factory settings
full tank and full tackle riding solo.
64mph
Last edited by zachmeredith; 06-28-2022 at 03:22 PM.
Facebook - https://www.facebook.com/lowranceprotips/
YouTube -https://www.youtube.com/c/LowranceProTips
2021 PHOENIX 818 PRO
2021 MERC 175 PROXS
Zach,
What are your rpms at wot and p2p measurement?
Are all pvs holes plugged?
Thanks.
Tight lines!