Page 11 of 11 FirstFirst ... 91011
Results 201 to 219 of 219
  1. Member
    Join Date
    Jan 2005
    Location
    Cedar Park, TX
    Posts
    197
    #201
    2018 21 PHX
    Mercury Pro 250XS
    25p Fury
    Bob's Action 12" Hydroplate
    1 12' Talon
    36v Ultrex 112 60" (will cut down)
    4 31 batteries
    Best speed so far after just breaking her in: 72 at 5600 rpm
    half tank gas, empty livewells, solo
    windy with ripples open water
    Bob's at 3.5 = 2.5" ptp

    coming from a Cobra (had 5), so never had chine before. Finally found that the chine mostly disappears at 2.5" below pad. Still figuring it out. Hoping a 26 fury or tempest will get the speed up but only 5570-5600 rpms with a 25 doesn't seem right to me. Anyone else getting the new 2018 21PHX running faster?
    Texas Hawgs Bass Fishing Guide Service
    2018 Phoenix 21 PHX - 2018 Mercury ProXS 250



  2. Member
    Join Date
    Dec 2016
    Location
    Batavia Ohio
    Posts
    7
    #202
    2016 920 250 mercury pro xs 25 fury hydraulic jack plate 112 fortress 2 gen 3 hds 9 to fat boys and way to much gear runs a solid 74 im happy

  3. Member
    Join Date
    Jul 2011
    Location
    Dirty Jerzy
    Posts
    295
    #203
    2016 819 PRO
    MERC 200 PROXS
    112 ULTREX
    HDS12
    HDS10
    and a whole bunch of fishing equipment my wife knows nothing about!!
    71.4 mph Empty
    Attached Images Attached Images

  4. Member
    Join Date
    Dec 2017
    Location
    Virginia
    Posts
    1
    #204
    2012 721 Pro XP 250 Pro SX 26 pfury two 8 PPBlades full tournament load two people 73 gps Half tank fuel just me 78gps

  5. Member
    Join Date
    Nov 2009
    Location
    Molino, FL
    Posts
    293
    #205
    2018 919 225 Yamaha sho.
    Atlas 10 inch hydraulic
    36 volt ultrex
    4 batteries
    Light load 1/2 tank gas
    77 mph
    2018 Phoenix 919. 225 SHO

  6. Member
    Join Date
    Sep 2010
    Location
    Nevada, MO
    Posts
    101
    #206
    Quote Originally Posted by bassmasher View Post
    2016 819 PRO
    MERC 200 PROXS
    112 ULTREX
    HDS12
    HDS10
    and a whole bunch of fishing equipment my wife knows nothing about!!
    71.4 mph Empty
    What prop and prop to pad?

  7. Member
    Join Date
    Jul 2011
    Location
    Dirty Jerzy
    Posts
    295
    #207
    Quote Originally Posted by keysd13 View Post
    What prop and prop to pad?
    stock prop and never measured prop to pad. Bought it used and all set up already

  8. Member rammerjammer's Avatar
    Join Date
    Dec 2009
    Location
    Hendersonville, NC
    Posts
    253
    #208
    2014 721 Merc 250 ProXS
    10" Atlas Hydraulic, set at 12
    24v Fortrex
    2 Men (320/200), heavy tournament load
    35 Gal fuel
    30 degree air 48 degree water temperatures
    25p Fury Stock
    5980 rpm
    75.6 mph

    I NEED a 26 pitch Fury or 27 Tempest. I can eat up the rev limiter at this motor height and temperature conditions.

  9. Member
    Join Date
    Jan 2018
    Location
    Arkansas
    Posts
    141
    #209
    2018 20PHX Yamaha 250 SHO
    Vmax SHO stock T2-25
    12" Atlas Hydraulic set at 14 on guage, 4" on plate - 2" P2P
    36v Ultrex
    12" and 15" Solix
    2-240 pd men
    3/4" Full on Gas
    Fully fishing load - est 75-100 pds
    64 degree outside are, water temp at 53
    Water pressure at 22psi
    74.2 mph
    6110 rpm(this is straight through NMEA from motor to digital display on my Solix so I know it's correct)

    Will post video and soon as my crappy internet speeds allow.

    Lithium Pro batts inbound so knocking 180 pounds off the rear, ECU flash and Croxton worked 27 T1 on the way as well. I'm betting 80 mph tourney loaded is going to happen, mid-80's with me and light boat..
    Last edited by falconpilot; 02-26-2018 at 02:48 PM.

  10. Member
    Join Date
    Mar 2017
    Location
    Southeast
    Posts
    581
    #210
    2018 721 250 Sho
    Manual plate at 2.5 ptp
    Stock 25 T-2
    No Poles 36 V TM 2 guys, gear, and 1 well full for ballast
    75.3 and climbing @~6k
    Still learning to drive it and had to let out of it.

  11. Member
    Join Date
    Jan 2018
    Location
    Arkansas
    Posts
    141
    #211
    New numbers after the ECU flash. I'd bought a 27 T1 from a guy and had him send it to Mark Croxton direct for a blueprint and tune - unfortunely the guy I bought it from apparently doesn't know what the difference in a vented and ventless Yamaha prop. I received the prop from Mark last night to discvoer its a vented prop which is useless to me..

    Anyways, ran the boat today in about the same condition as I did before. Still running the stock 25 T2, with fishing load, 2 guys and 1/2 tank gas, the boat ran 77.4 at 6238 rpm's.....I step out of boat and filmed from shore as my buddy made a pass with only one person - 79.8 mph at 6287 rpm. I was thinking that I'd have to go up in prop size but I believe the 25 T2 is going to work great - when it gets hotter, the rpm will come down some keeping me off rev limiter. I'm still trying to decide if its worth trying a Worked 25 T1 or 26 T1..

    My lithuim pros will be in next week which should add another 2 mph which will put me at the 80 mph mark with two people and tourney loaded. With one person and lighter load, 82-83 should be doable...I'll keep you posted with video and picture of proof.
    2018 Phoenix 20 PHX SHO 250

  12. Member
    Join Date
    Jan 2018
    Location
    Arkansas
    Posts
    141
    #212
    Video of 79.8 mph run..

    2018 Phoenix 20 PHX SHO 250

  13. Member
    Join Date
    Oct 2017
    Location
    Vacherie, La
    Posts
    69
    #213
    Quote Originally Posted by falconpilot View Post
    New numbers after the ECU flash. I'd bought a 27 T1 from a guy and had him send it to Mark Croxton direct for a blueprint and tune - unfortunely the guy I bought it from apparently doesn't know what the difference in a vented and ventless Yamaha prop. I received the prop from Mark last night to discvoer its a vented prop which is useless to me..

    Anyways, ran the boat today in about the same condition as I did before. Still running the stock 25 T2, with fishing load, 2 guys and 1/2 tank gas, the boat ran 77.4 at 6238 rpm's.....I step out of boat and filmed from shore as my buddy made a pass with only one person - 79.8 mph at 6287 rpm. I was thinking that I'd have to go up in prop size but I believe the 25 T2 is going to work great - when it gets hotter, the rpm will come down some keeping me off rev limiter. I'm still trying to decide if its worth trying a Worked 25 T1 or 26 T1..

    My lithuim pros will be in next week which should add another 2 mph which will put me at the 80 mph mark with two people and tourney loaded. With one person and lighter load, 82-83 should be doable...I'll keep you posted with video and picture of proof.

    I applaud how how you basically just say, hell with that warranty!

  14. Member
    Join Date
    Jan 2018
    Location
    Arkansas
    Posts
    141
    #214
    Warranty isn't a problem...limiter wasn't moved..
    2018 Phoenix 20 PHX SHO 250

  15. Member
    Join Date
    Nov 2015
    Location
    Il
    Posts
    308
    #215
    The vents in that prop won’t hurt a thing probably little better hole shot I had mark put them in my sho prop i run small holes runs up too 3500 instead of 3000 rocket out off the hole

  16. Member
    Join Date
    Jan 2018
    Location
    Arkansas
    Posts
    141
    #216
    Boat blows out to 4800 rpm coming out of hole. With my 25 nonvented, it rockets out..
    2018 Phoenix 20 PHX SHO 250

  17. Member
    Join Date
    Jan 2018
    Location
    Arkansas
    Posts
    141
    #217
    Stilling waiting on my Lithium Pros...But I did run the 26T1 today. Bought rpm's back down to 6130 or so, and bought speeds down to 76.2 with two 240lb guys, 1/2 tank gas, and full tourney load. Little surprised by the results as I was expecting the 26T1 to be faster...
    https://www.facebook.com/jim.fowler....821686193/?t=3
    Last edited by falconpilot; 03-13-2018 at 07:44 PM.
    2018 Phoenix 20 PHX SHO 250

  18. Member
    Join Date
    Jan 2018
    Location
    Arkansas
    Posts
    141
    #218


    81.4 one person
    79.0 with two
    2018 Phoenix 20 PHX SHO 250

  19. Member
    Join Date
    Jan 2017
    Location
    Illinois
    Posts
    30
    #219
    2018 21 PHX
    Verado 250
    Bobs 6" hydraulic plate.

    fastest I have seen so far is 69.1 with about 12 gallons of gas left. Little chop on the water, and ran out of lake. approximately 12 hours on her.

    current prop is 25 Fury 3 blade but that is going to change. PVS holes are all plugged. Cant really get a "shallow water takeoff" yet because it blows out.

    Thinking of going Bravo XS -- not sure what pitch.

Page 11 of 11 FirstFirst ... 91011