Where to look and how to look at the Sonarchart
Once on the lake that you want to see zoom in enough to be able to activate the sonarchart button on the bottom left of the page (see pics)
Where to look and how to look at the Sonarchart
Once on the lake that you want to see zoom in enough to be able to activate the sonarchart button on the bottom left of the page (see pics)
Get $50 rebate: https://www.navionics.com/usa/rebate...ent=digital_ad
I currently live in Utah and fish a lot of small lakes in the intermountain area. I just purchased a Lowrance Elite Ti-9 and would like to use a navionics card. I am looking for some words of wisdom, since I have never used one before on which card to purchase. Any response would be greatly appreciated. Thanks
First of all you should check to see if Navionics has contour maps where you need them.
You can view their current maps on their website’s Web App.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Awesome Navionics Rebate. Shop BBC vendors first!!
https://www.navionics.com/usa/blog/p...-rebate-offer/
Been hanging out down in South Florida doing some prefishing decided to take this as an excellent opportunity to join in on the Navionics Post Irma ReMapping Effort. If you fish Florida, UPDATE YOUR MAPS daily!!
https://www.navionics.com/usa/lp/remap-south-florida/
Does anyone have a shortcut way to view recorded sonar chart live data across multiple graphs from a single card? All my mapping from last year has been processed but is not applied to latest update as of today.
2020 Phoenix 920 Elite | Merc 250 ProXS
You need gps signal, then you choose sonarchart live on both unit, sonarchart and voila you can view snl on both unit. Don't tell me it's not working I have 2 units in house and it's working. Be sure to run the latest update.
Are you running a card in each unit? In my set up I would have to switch card from unit to unit as well as disconnect my phone/app from one unit and re sync to other unit.
edit* second thought... doing what you said it would try to write data from 2 separate transducers simultaneously. I want it to write data to console unit (with card) and then just view it on bow unit after I’m done mapping. Whenever I’ve tried turning SCL on, on the secondary unit the other unit would just reboot.
Last edited by Dam0007; 02-11-2018 at 10:38 PM.
2020 Phoenix 920 Elite | Merc 250 ProXS
I have 1 card in one unit
I bought a Hotmaps Platinum last March. Do I need to do anything to keep it active? What happens if I don't update/resubscribe?
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
I have only made conclusions related to this but heard no specific statement. If your subscription lapses....say 6 months or even a year, can you just pony up the subscription again or are you ** outta luck?
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Thanks Wayne, good to know.
I just did the update to my Platinum E6. Its not showing the channel markers on the upper lake at Santee Cooper SC. Checked for settings in the unit and didn't see anything. On the Navionics website map it shows the channel markers. How do I fix it?
Thanks
Dave Sheffield
Proudly Representing:
Bass Cat Boats
Mercury Outboards
MotorGuide Trolling Motors
Ardent Outdoors
Power Pole
Are you talking about this?
Take a look : chart options-settings-chart details-should be on All
Thanks. Had all that set up and fishn chips on. When I was testing in driveway they weren't there. At some point during the day I zoomed out an wahala they appeared.
Thanks
Dave Sheffield
Proudly Representing:
Bass Cat Boats
Mercury Outboards
MotorGuide Trolling Motors
Ardent Outdoors
Power Pole
Hey guys, I just bought two Elite 9 TI's and put them on my boat. I have heard a lot of good stuff about the Navionics Hotmaps Platinum, so I bough the south region because I live in LA and fish mostly here and Texas. One of the big selling points on the card is that it has satellite overlay, and I fish Sabine River a ton so the satellite view would be really nice. Well I got the card yesterday, got online and activated and updated it, then put it in my unit. I scroll over to the Sabine and zoom in and satellite view never shows up. I watched a couple of videos and saw that you have to turn the Photo Overlay on, so I turned it on Full and still nothing. I went to Toledo Bend next just to see, and low and behold, it has satellite view. I really don't need it on a lake like that, I need it on the river system. Are there only certain bodies of water that have satellite overlay?
2023 Phoenix 721 ProXP
2023 Mercury 250 ProXS
If you look at some videos that I did lately this is exactly what I was explaining.