Awesome Story Bassman Fishing! THANKS! For Protecting our Rights of Freedom
Awesome Story Bassman Fishing! THANKS! For Protecting our Rights of Freedom
--
http://www.dougvahrenberg.com/
BASS Central Open- Competitive Bass Angler and Humminbird Guru
Visit my website to learn about my sponsor's products, fishing tips and techniques.
Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/
I have a 798HD SI combo. From searches I think I need a cable to connect it to my I Pilot, #720074-1. Is this correct?
The cable i found you needed is ‡These units require Ethernet Adaptor Cable AS EC QDE
Found at
http://www.google.com/url?sa=t&rct=j...03388427,d.dmo
I can't get my ipilot to follow the contour. When I select a contour and hit go to nothing happens
could be several things. Do you get the drop down menu showing the colors of the direction you want to go
No I don't get anything
I'm running the 899ci hd with terrova trolling motor all purchased in sept
Do both have the latest updates?
I tried to do the link controller update and the link remote update, but when i put my sd card in the unit it didnt do anything
Are you using a Lake Master Card? Without the card it will not work.
Abking 275, It has been a while since I updated my equipment but if I remember correctly you should only have update for one thing on the card at a time. do the trolling motor first and then you do the upgrade for the remote thru the remote menu. I hope this isn't to confusing but it took me a while to get it right before I could get everything up to date.
Phil
__________________________________________________ ___
**Looking for the one that makes it all worthwhile**
__________________________________________________ ___
Units ..... 1197 (6.310) ...1198 (6.490) ... Helix 12 MSI G3N
Yes, I do have the lakemaster card that says ipilot
when i do an accessories test the link is showing up as v2.15, but the remote says not connected
The remote not connected is for the as rc 1 remote which is for the depth finder. Will say remote then under that it will say remote dongle.. turn on your I pilot link remote. Go to "controls" and under it , it will give you a list of options. Go down to "about "and choose it. That will give the remote and link controller software issue that is installed . Not sure what the latest issue is mine is 2.040 for remote, and 2.150 for link controller
Which IS the latest core update NTS........
Robert
Newaygo CTY, MI
Helix12MSI G2N v1.84/Helix10MSI G2N v1.84/Helix10MDI G2N v1.84/ASGPSHSx2/iPilotLinkv2.15/2.04RC-1+2/
Am I reading this right I have a998C and a 899CI-HD, the way I'm reading the chart the 899CI-HD is not compatible with the I-pilot link? Thanks
It is compatible, any unit that has Ethernet capabilities is I pilot link compatible.
Thanks