Results 1 to 2 of 2
  1. 03-09-2021, 08:22 PM #1
    mnmike
    mnmike is offline
    Member
    Join Date
    Jan 2017
    Location
    Minnesota
    Posts
    42

    Mega 360 wiring question

    Going to be installing mega 360 and had a question about the drain/shield wire. I have 10 awg wire with an inline fuse ran from my battery to a switch at the bow and then to 360. My question is can I tie the negative and drain/shield wires together? Or do I need to run an independent wire for the drain/shield wire to the neg post on battery or a negative bus bar for fuse block.
    Reply With Quote Reply With Quote
  2. Wayne P.
    Wayne P. is offline
    Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,414
    #2 03-09-2021, 08:27 PM
    Tie them together. The end up the same place no matter how to do it==the battery negative.
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »