Page 5 of 6 FirstFirst ... 3456 LastLast
Results 81 to 100 of 111
  1. Member
    Join Date
    Sep 2011
    Location
    Maine
    Posts
    31
    #81

  2. Member Fat Basser's Avatar
    Join Date
    Jan 2005
    Location
    Cary, IL
    Posts
    1,884
    #82
    I have a 2010 Bullet 21 XRD with a 4 stroke 250SS. I just picked the boat up a couple of weeks ago and got to put it in the water once. All I can say is this motor unbelievable performance in all ranges. I can't wait till Spring.

    photo (47).jpg

  3. Member
    Join Date
    Apr 2012
    Location
    Insomnia, near Seaford Delaware
    Posts
    35,516
    #83
    I have a 19 foot 6 inch Stratos dual console. It had a Ficht 175 Evinrude on it but it blew up twice in one year and that was enough Blue for me. I bought a 2006 DF 175 Suzuki and installed it on a 6 inch jackplate. It has hydraulic steering. I had to make a new dashboard (speed limit signs are .125" aluminum) and buy a Suzuki tach and do a lot of rewiring, but now I know a lot more about my boat.
    A month ago I hit a bolt on a bulkhead support post and wrecked the boat. I am still trying to repair it but it has been too cold to do much fiberglass work. I am turning a 28 inch pitch prop but still need a bigger one. It's no speed queen, but I am basically interested in making return trips. She's quiet and economical. Now if I can just finish fixing the hole in the side, I'll be back in her in a month or so.

  4. Member cleve68's Avatar
    Join Date
    Sep 2008
    Location
    kingwood tx.
    Posts
    337
    #84
    This one will run, I really like it a 1993 150 with EFI Bob's lower unit.spinning a 27 pitch and with the Power lift and some trim oh my It will run.



  5. Member
    Join Date
    Apr 2012
    Location
    Insomnia, near Seaford Delaware
    Posts
    35,516
    #85
    Beautiful boat Cleve. I have a 28 pitch prop I'm not using, hint, hint. I fixed my Stratos I guess it's time to try to get a pic or two of it in here but it's a war horse, not a beauty queen.

  6. Member
    Join Date
    Aug 2011
    Location
    lufkin texas
    Posts
    235
    #86

    1992 suzuki 150 efi on 1989 champion 184 dc


  7. Member
    Join Date
    Jun 2004
    Location
    Spanish Fort, AL
    Posts
    1,125
    2024 Xpress X21 / Yamaha 250 SHO
    2022 Allison XB-21 BasSport Pro Elite / 2022 Mercury 300R (Sold)

  8. Member
    Join Date
    Apr 2013
    Location
    Hot Springs Village, Arkansas
    Posts
    976
    #88
    2013 Alumacraft Competitor 165 Sport Limited
    2014 Suzuki DF90

    had it out about a half dozen times now, starting to think the gas gauge is bad, still hasn't come off full.
    Tracker Panfish 16

    Bonafide EX123 Kayak

  9. Member
    Join Date
    Apr 2014
    Location
    PA USA
    Posts
    9
    #89
    1987 150 V6 on a Ranger 373V......Unlike the rest I have had 2 years trouble free and 3 years of headaches. Dealing with tilt motor now, Haven't seen much water for years Still have faith.

  10. Member
    Join Date
    Dec 2012
    Location
    Stanwood, WA
    Posts
    93
    #90

    My Suzuki

    My older Skeeter with a 2013 Suzuki DF175
    Attached Images Attached Images

  11. Member Bassman Ia.'s Avatar
    Join Date
    Mar 2005
    Location
    Co.Bluffs
    Posts
    33,238
    #91
    I have owned two Suz. First one was a 140 carb. Ran it 10 years, ran it hard--- never had one problem with it. Second one was a 150 EFI, That would have been 1999 model, I never had any problems with it. Sold the boat in 2002 that owner still has the boat and Suz. I think he had to replace the computer in it. Both of them were/ are well built 2 strokes.

  12. Member
    Join Date
    Apr 2015
    Location
    minnesota
    Posts
    119
    #92
    just picked up my new xpress x21 couple of weeks ago w/ a zuke 250ss stealth pushin it. still in the break in and trying to get the right prop combo but so far has been a sweet motor. hole shot is unreal. seein 67mph at 5600-5700 so i think shell b a bullet once its broke in and propped correctly

  13. Member
    Join Date
    Apr 2015
    Location
    Hartsville S.C.
    Posts
    314
    #93
    1991 Suzuki DT 150 on a 286 pro tournament sprint, carb and hitting around 56 at 5900 rpm ,I think it will do more if adjust jack plate

  14. Member
    Join Date
    Jul 2013
    Location
    Debary Florida
    Posts
    426
    #94
    IMG_06981 (1).jpgI have a 1987 Cajun Ricky Green Fishing machine 18.5' long. Up until last Wednesday it was powered by a Yamaha Pro V150. That motor blew up so I decided to pull the trigger and I am taking it in Friday to have the new 150 SS 4 stroke installed. I Can't wait to see how it performs with a new Suzuki!!
    Last edited by firemech048; 09-24-2015 at 03:47 AM.

  15. Member
    Join Date
    Apr 2012
    Location
    Insomnia, near Seaford Delaware
    Posts
    35,516
    #95
    My 175 HP 2006 Suzy 4 stroke seems less peppy than the 2 stroke 'Rude I had before but much quieter and better on gas. Both motors were used and the 'Rude is still under the bench in pieces after blowing up twice.

  16. Member
    Join Date
    Jul 2013
    Location
    Debary Florida
    Posts
    426
    #96
    I am headed to dealer today to pic up my boat with my new Suzuki 150 SS on it. I have to take it out to test props and decide which one I want them to provide me. Very excited!!IMG_07001.jpgIMG_06871.jpg

  17. Member
    Join Date
    Apr 2012
    Location
    Insomnia, near Seaford Delaware
    Posts
    35,516
    #97
    I see you found out you need to at least have a Suzuki tach. It reads the motor computer and tells a lot of info besides R P M. Does your motor still ask you to run non-ethanol like mine does? I hope you find out which prop runs best. Suzy's are designed for a large diameter low pitch prop I M H O. I'm running a 16 inch diameter with a 23.5 pitch on my 175 with a heavy 20 foot Stratos, I can hit 6100 R P M if I want but I generally stop at 5500. I.M me for an absolute killer deal on one.

  18. Member
    Join Date
    Jul 2013
    Location
    Debary Florida
    Posts
    426
    #98
    20150924_184338.jpgThe owners manual says you can run other fuel but recommends non-ethanol. I have always run that when i had my yamaha. I can't wait to get the break in hours done.
    Last edited by firemech048; 09-26-2015 at 11:47 AM.

  19. Banned
    Join Date
    Aug 2004
    Location
    Hubbard, Ohio
    Posts
    12,389
    #99
    Just picked up my new 2017 Polar Kraft 195 Pro / Suzuki 140 four stroke! this will be my first four stroke.

    Attached Images Attached Images

  20. Member
    Join Date
    Sep 2014
    Location
    Oklahoma
    Posts
    796
    #100
    2015 250ss in a 210 super pro procraft. Love the motor.

Page 5 of 6 FirstFirst ... 3456 LastLast

Similar Threads

  1. How to get started?
    By American Bassman in forum Rod Building & Tackle Making
    Replies: 15
    Last Post: 06-15-2011, 02:41 AM
  2. To get started?
    By Original TrickWorm in forum Rod Building & Tackle Making
    Replies: 1
    Last Post: 01-26-2011, 05:25 PM
  3. 89 suki dt 150 control swap?
    By nowhereman825 in forum Suzuki Motors
    Replies: 6
    Last Post: 11-10-2006, 03:51 AM
  4. getting started!
    By bugman in forum Bassboat Restoration
    Replies: 1
    Last Post: 06-26-2005, 05:19 AM