Any recommendations on a 4 blade for a 2017 Skeeter FX21/yamaha Sho? Dont care much about top end, want holeshot/midrange and help the slow speed porpoise.
Can you get a 23 Fury? I have Phoenix 21PHX, with the new 250 four stroke. I live at 5000ft elevation. Ran a 21 Trophy plus @ 62 mph and 6160 RPM. And a 23 trophy 64 mph but only 5700 RPM. Thinking about haveing Mark rework a Fury to 22 pitch. What do you think about that? Or maybe go with a Bravo 1? If Bravo what pitch? I heard that you need to and a couple pitch to Bravo's.
Anybody have any ideas on what I could do to plane better under tournament load? I have a 2008 pro craft 192 super pro with a 200 mercury efi. I recently borrowed a 4 blade 24 pitch and it planes pretty fast with me and my partner until we get a full live well and then it won't plane at all, it just plows until he leans on the bow.
Not moving very fast either (58 GPS and 62is by myself), but getting on plane quickly is more important to me at this point. Slidemaster manual jack plate. Prop shaft is about 4inches below pad
The rpms for the loaded weight at 58mph is 5800 and by myself empty livewells 62 6000rpm
Last edited by Brob52; 07-10-2018 at 11:40 PM.
Do you have the 2.5 or 3.0 block? What kind of 4 blade are you using?
2.5 and it's just a no name prop a buddy let me borrow.
2.5 block will always struggle a bit with holeshot and a load. I would try a 24p fury or a 24p tempest.
Last edited by waknbass; 07-11-2018 at 08:21 PM.
Big O Boat250 Merc Pro XS
Thanks
I am in need of a SS prop for my 2006 Triton SP185, 2006 Evinrude Etec 90. The current prop is a Michigan 13.25” 17p and my motor operates between 5200-5600 @42mph on my gps, so I believe the size and pitch are correct.
i want to go SS because this prop blows out on turns and when trimmed up a little too much. What would you recommend?
2006 Triton SP-185, 2006 Evinrude Etec 90, PowerTech NRS3, Garmin Echomap Plus 73CV & 93SV
FYI, the prop prices have changed and have been updated on our website. Thank you for your continued support!!!!!!
https://rothwellmarine.com/product-c...rnet-specials/
Hi Guys, I have a 2018 Triton 19trx patriot with a mercury 225 optimax pro xs with a 24 Fury. My analog tach reads 6400 rpms and only going 60mph. I have a 4” hydraulic jack plate and 2 power poles. Please help.
Looking for the best prop for my new 2018 Alumacraft trophy 185 with a evinrude g2 150 h.p. Currently have a 15 1/2 x 17 and was told by alumacraft the recommeded prop should be 14 3/4 x 17. Would this make much difference? And any recommondations would be nice thanks guys
If you need a prop, just call Greg and the boys at Rothwell, I stopped by today and picked one up, Greg is a GREAT guy to deal with!!! Thanks again Greg!!
18' Blazer 595 Evinrude ETEC 225 HO running a Raker II 4 blade 24p now. Hole shot is instant and mid range good. Not close to the top of the RPM band, but top speed in summer is only 69 ish with me and a tournament load. Trim up to 100% and the boat gets hard to drive. Was wondering if I switched over to a 3 blade if I could get a little higher RPM's and top end speed as well? Do you have any input on a Prop to try with this combo?
Thanks,
Lee Setser
2022 Blazer 625
2022 Mercury 250 Pro XS
Lowrance HDS 12 Lives
Lowrance Active Target
Please see the original post for new procedures on purchasing a prop. We have had to update our pricing and advertising, and again, WE WILL NOT BE
UNDER SOLD on Mercury Props!! Thank you so much BBC!!
Just bought a fury 4, great price. Thank you.
Do you carry the Enertia ECO?
2019 Blackjack 256
Mercury Verado 350
I ordered a prop online today from Rothwell on Mark Croxtons recommendation and did not know about the discount code. I called a short time later to ask about the price as I saw a different price somewhere else on the site. The woman who helped me advised of the discount code for future purchases and said they will credit me the difference Monday.
Now that is customer service, I already toid 3 buddies about it and they said they will purchase from Rothwell if/when they need a prop.
2015 Nitro Z6
2015 Mercury 115 4S CT
I have a 2005 Ranger 521VX, 2009 Yamaha 250HPDI Series II with a 10" hydro jacker Running a M25 Prop. I busted my prop today (Not sure how). Should i go back with OEM or try a 26? I dont know much about props, but with the 25 i have a decent hole shot and it runs 68 loaded. I guide and tournament fish out of this boat, so it is always loaded down and full if gas. Please advise!