21x2 prop

[jonmay]

currently running a 25 razor 3 and I have a 26 temp plus that needs work. currently at 3 3/4 below pad. Previously had it at 5" below and could run 71 with heavy load. I thought I could turn the 26, but can't for some reason. Stops accelerating at 60 wot. Why would that be?

[Reelsore]

A little more information is needed. What motor and JP ?

[jonmay]

250 pro xs, 10 manual jack plate

[Triton19x2]

The 26 Temp+ are famous for being off right out of the box. Mark C. could fix that for you. I would think it would run similar to the 25 Razor but Mark could answer that for you as well.
BTW, the sweet spot on my X2 is 4" BP. Tried several diff. props and always end up @ 4" BP

[Triton180DC]

Mine slips horribly in the 3" range go back to 4" range and try again, my Tempest is Crap too. Probably needs run 1/2 deeper than the other prop.

BTW a 26 tempest is Tritons choice to run. They say if the jack plate is on the middle hole then bottom the plate out and come up two inches and adjust around that range.

[rock]

I have the same boat 21X2 250 It came with a 25 tempest and I bought a 25 fury. I run my boat heavy 4 sears AGM batteries, full of fuel, 2 fat guys and my boat will run 69 MPH Lite 71-72 the 25 fury beat the 25 tempest by 1 MPH.. these are stock props..

[bentzboatwhisperer]

Fury 4 25P-26P run 73mph at 6000rpms 1 person half-3/4 tank of fuel light load livewells full. Very quick woke this boat up felt very stable controlled. Start with all PVS plugs open then go from there. Boat stays about 71-73 when another person hops in.

[jcuts9]

I have an 07 21 x2 250 optimax, not really worried about speed, but I run a Merc Fury 4 26p

Great hole shot and control. I wouldn't use another prop