Sn-ot652695, is there any other rigging hose set up for my motor? I would like the same rigging as the optimax motors but don't know if it is possible in an older style cowling.
Sn-ot652695, is there any other rigging hose set up for my motor? I would like the same rigging as the optimax motors but don't know if it is possible in an older style cowling.
Unfortunately, you will not be able to utilize the later-style rigging fitting with this particular cowling.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Well is there any other rigging available for this cowling?
You're basically limited to this fitting.... or modifying this fitting with an "oval shaped hole" that could accept a piece of the newer-style semi-rigid rigging tube (essentially stuffing the tube into an oval shaped hole).
Not the best method.... but it has been done.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Modified by nobody2u at 8:35 AM 7/6/2011
That part number is a 2.5L Rigging Flange kit.... looks like it fit your lower cowling like it was meant to be there.
Any modification required? (It's not listed for any 3L models... would be great to know for future reference)
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
No mods, direct fit!!!!
Dads 2001 225efi is just like the one in the above pic. It came that way on his triton.
Nobody2u, where the heck have you been. I spent two hours stuffing a shopvac into mine. Don, gotta order one of these.
This topic has been added to the Commonly Asked, Commonly Used Sticky Post.... under "Mods and Such" section.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
What diameter hose are you using with this kit?
2" Diameter hose
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor