Which boat is faster

[bassknight]

With same set-up which boat is faster

[jowens]

These boats aren't going to run the same setup.....the big numbers from Stroker have come with a 300X and a 370HP Hydro Tec Yamaha. That isn't going to apply on a Allison XB-2002. Might work okay on a Allison XB-21, and i think it has been done, but there wasn't enough testing, trial and error, ect to see what it would really run.

Light Layup Stroker/ 370hp Hammer has been to 118 on one occasion, wondering if it will do it again?

Allison has the bass boat world speed record . Was it 122??

Bullet has been 119 in a 20CC/300 Drag??

[Largemouthlou]

Neal ya need to specify which model Bullet and which model Allison and yes you have opened up a can of worms

There are too many variables to this poll

[K-DAWG]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Largemouthlou &raquo;</TD></TR><TR><TD CLASS="quote">Neal ya need to specify which model Bullet and which model Allison and yes you have opened up a can of worms

There are too many variables to this poll </TD></TR></TABLE>

[21XDC]

What boat is fastest with a "full" fishing load?

What boat has the fastest holeshot?

What boat has the fastest acceleration?

What boat can corner the fastest?

What boat is fastest with a 150?

What boat looks the fastest sitting on the trailer?

What boat is fastest changing areator/bilge pumps?

What boat has the fastest crapper?

[blair]

[Bartman39]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 21XDC &raquo;</TD></TR><TR><TD CLASS="quote">What boat has the fastest crapper? </TD></TR></TABLE>

No its what boat makes you do this the fastest...

[nightbasser]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Largemouthlou &raquo;</TD></TR><TR><TD CLASS="quote">Neal ya need to specify which model Bullet and which model Allison and yes you have opened up a can of worms

There are too many variables to this poll </TD></TR></TABLE> Gotta make it apples to apples using the same type boat from each manufacturer The closest you could get would be Bullet 20xdc allison xb 21 and the stroker

[K-DAWG]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nightbasser &raquo;</TD></TR><TR><TD CLASS="quote"> Gotta make it apples to apples using the same type boat from each manufacturer The closest you could get would be Bullet 20xdc allison xb 21 and the stroker</TD></TR></TABLE>

Bullet 21 would be a better comparison than the 20.

[Bass Commander]

Just check the official records of the American Power Boats Association (APBA). By the way...APBA doesnt use gps and a flash of a top end speed.

[Hydrilla Gear]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by K-DAWG &raquo;</TD></TR><TR><TD CLASS="quote">

Bullet 21 would be a better comparison than the 20.</TD></TR></TABLE>

Too many variables. a 20 Bullet is probably a lot closer to the 21 Allison and Stroker.

I have parked my rig next to both and the Allison/stroker look like 18' rigs.

[Bass Commander]

Huh?...Ive owned 18' bass boats and my BasSport Pro sure doesnt remind me of any of them. Who's BasSport Pro have you parked next to?

[Largemouthlou]

Come on Bullet guys!! Ya'll are loosing this poll!!

Guess I should add a Z9 to the poll

[Hydrilla Gear]

The Allison does not look as long as a bullet. The Stroker looks the shortest. Thats my observation.

I would be interested to pull a tape down the center of the keel on all 3. Even that is going to throw variables.

I was in a Basssport pro not 2 months ago. It does not look or feel as long as a 21xrd no way. Maybve it was the dual consol but it sure was lacking some length.

Rob, I didnt say they ARE 18' rigs. i said they look like one next to the 21xrd.

[Largemouthlou]

Would be easy enough to pull a tape from the bow point to the transom to keep it equal and not count the sponces..

[Hydrilla Gear]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Largemouthlou &raquo;</TD></TR><TR><TD CLASS="quote">Would be easy enough to pull a tape from the bow point to the transom to keep it equal and not count the sponces.. </TD></TR></TABLE>

you go do yours and i will do mine

[Bass Commander]

Hahaha...are you sure you want me to go from the bow point?...

No doubt the 21' Bullet is a lot of boat!

[Largemouthlou]

Do it like this, mine is 19' 10" from bow to transom, with 2'7" of bow length (from tip of bow to start of carpet). So that would be 17'3" of inside boat.

did a correction on the Stroker

Gonna go measure the CC

CC best I can tell with covers on
18'4 overall, 2'3" of bow and 16'1" from carpet to transom

I stopped measurements at outside of transom

[Bass Commander]

carpet end to carpet end...thats gonna suck for me due to the back deck fairing...

[Largemouthlou]

Rob, go to outside of transome where motor is bolted