Page 1 of 2 12 LastLast
Results 1 to 20 of 30
  1. #1
    Member Largemouthlou's Avatar
    Join Date
    Jun 2004
    Location
    Palm Bch Gardens FL
    Posts
    26,830

    BWB, Prop test on 20XD 250xs (new chart)


  2.  
  3. Member
    Join Date
    Jan 2006
    Location
    Newton, NC
    Posts
    74
    #2

    Re: BWB, Prop test on 20XD 250xs (Largemouthlou)

    Were did you get that pic Lou?
    "The bitterness of poor quality & service remains long after the sweetness of low price is forgotten"

  4. Member Largemouthlou's Avatar
    Join Date
    Jun 2004
    Location
    Palm Bch Gardens FL
    Posts
    26,830
    #3

    Re: BWB, Prop test on 20XD 250xs (The Big Al)

    Borrowed it from you Bud Just trying to help all

  5. Member
    Join Date
    Jan 2006
    Location
    Newton, NC
    Posts
    74
    #4

    Re: BWB, Prop test on 20XD 250xs (Largemouthlou)

    I agree!

    just had to gig ya a little!!!
    "The bitterness of poor quality & service remains long after the sweetness of low price is forgotten"

  6. Member
    Join Date
    Nov 2004
    Location
    Chippewa Falls
    Posts
    55
    #5

    Hey Lou !

    I haven't been on the boards for a while - I see a different boat - I thought you had your eye on a new 21XRD - Do you like the new ride? - Fred

  7. Member Largemouthlou's Avatar
    Join Date
    Jun 2004
    Location
    Palm Bch Gardens FL
    Posts
    26,830
    #6

    Re: Hey Lou ! (lucifers hammer)

    Fred, had my eye on several boats but went with the Stroker for several reasons!! I like her more each time I take her out.. ANd that has only been twice so far. Louis

  8. Member
    Join Date
    Mar 2006
    Location
    Ft. Worth
    Posts
    68
    #7

    Re: Hey Lou ! (Largemouthlou)

    Hey Lou!! Long time no speak lol. Can you give me some details about how the 20xd was loaded when these tests were conducted??? Thanks, Shayne

  9. Member
    Join Date
    Jun 2005
    Location
    Deville
    Posts
    96
    #8

    Re: Hey Lou ! (Bullet Basser)

    Actually that test was on a 20XDC, not an XD. The test was done with two people, three batteries, a motor guide troller, the livewells empty, and a full tank of gas(about 30 gallons). The boat had a 12 inch Rapid Jack., 1.62 Sportmaster lower unit, and was run around 1 1/2 to 1 3/4 inches above the pad. That is the information that I have read about the test, some of it may be off a little, you know how the net can be.

  10. Member
    Join Date
    Mar 2006
    Location
    Ft. Worth
    Posts
    68
    #9

    Re: Hey Lou ! (Specularius)

    Thanks Spec!! What prop are you running for fishing?? Dont you have the same setup? Thanks alot.... Shayne

  11. Member
    Join Date
    Jun 2005
    Location
    Deville
    Posts
    96
    #10

    Re: Hey Lou ! (Bullet Basser)

    My set-up is quite different. I have a 10 inch Detweiler Hydraulic plate and a Minn Kota Pro 80 Troller (Very Heavy). I run a 28 Bravo 1 with one inch vent holes to fish with. It will consistently run 88-90 loaded to fish with two people and has a great hole shot. I have ran a 30 Bravo 1 that had one and a quarter inch vent holes and the holeshot was almost the same but it ran about 3 miles an hour faster. I just haven't tried to find me one to buy as I have been very happy with the 28 Bravo so far.

  12. Member
    Join Date
    Jul 2006
    Location
    Bradenton
    Posts
    81
    #11

    Re: BWB, Prop test on 20XD 250xs (Largemouthlou)

    2001- 21XDC
    Pete

  13. Member
    Join Date
    Jun 2004
    Location
    Highland
    Posts
    810
    #12

    Re: BWB, Prop test on 20XD 250xs (Largemouthlou)

    Hey Louis I realize this is an old thread but I just repowered to a 250xs on my 20DC and am interested. Where can I view this test I see its gone from the first post now

    Thanks
    Charlie B


    Charlie B
    Bullet20DC w/ 04 250XS



  14. Member V6MERC's Avatar
    Join Date
    Apr 2005
    Location
    Potosi, MO
    Posts
    2,064
    #13

    Re: BWB, Prop test on 20XD 250xs (Bullet20dc)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bullet20dc &raquo;</TD></TR><TR><TD CLASS="quote">Hey Louis I realize this is an old thread but I just repowered to a 250xs on my 20DC and am interested. Where can I view this test I see its gone from the first post now

    Thanks
    Charlie B</TD></TR></TABLE> Here you go Charlie!!!
    http://www.bwbmag.com/output.cfm?ID=1221571

  15. Member
    Join Date
    Jun 2004
    Location
    Highland
    Posts
    810
    #14

    Re: BWB, Prop test on 20XD 250xs (V6MERC)

    Thanks Darryl good read


    Charlie B
    Bullet20DC w/ 04 250XS



  16. Member V6MERC's Avatar
    Join Date
    Apr 2005
    Location
    Potosi, MO
    Posts
    2,064
    #15

    Re: BWB, Prop test on 20XD 250xs (Bullet20dc)

    You're welcome, Charlie...

  17. Member Largemouthlou's Avatar
    Join Date
    Jun 2004
    Location
    Palm Bch Gardens FL
    Posts
    26,830
    #16

    Re: BWB, Prop test on 20XD 250xs (V6MERC)

    Thankd Darryl, I was outa town since Friday morning.. I do need to put this back up

  18. Member V6MERC's Avatar
    Join Date
    Apr 2005
    Location
    Potosi, MO
    Posts
    2,064
    #17

    Re: BWB, Prop test on 20XD 250xs (Largemouthlou)

    No problem, Lou...

  19. Member
    Join Date
    Sep 2008
    Location
    Jacksonville
    Posts
    59
    #18

    Re: BWB, Prop test on 20XD 250xs (Largemouthlou)

    I just bought a new 21xrd w/ performance prop - there aren't any markings, mfg, or pitch - how can I tell if it IS a performance prop and size?

  20. Member Largemouthlou's Avatar
    Join Date
    Jun 2004
    Location
    Palm Bch Gardens FL
    Posts
    26,830
    #19

    Re: BWB, Prop test on 20XD 250xs (git-er-dun)

    Take the nut and washer off and look there on the top of the prop hub, it will say performer and pitch..

  21. Member
    Join Date
    Sep 2008
    Location
    Jacksonville
    Posts
    59
    #20

    Re: BWB, Prop test on 20XD 250xs (Largemouthlou)

    Lou,

    Top of hub - EOT-14327-RU and (10) on separate stamp - no other markings - I'm puzzled???

Page 1 of 2 12 LastLast

Similar Threads

  1. Prop Test On 21SS W/250XS
    By hubert davis in forum Bullet Boats
    Replies: 23
    Last Post: 10-07-2011, 08:45 AM
  2. 20XD/250XS/Mark's Razor Prop Set Up Help
    By jemccall in forum Bullet Boats
    Replies: 12
    Last Post: 07-13-2011, 07:31 PM
  3. 20xrd/250xs Prop test results
    By 70 Mach 1 in forum Bullet Boats
    Replies: 8
    Last Post: 09-17-2010, 05:19 PM
  4. prop question txp/hydromotive/bravo 20xd w/250xs
    By james69z28 in forum Bullet Boats
    Replies: 13
    Last Post: 07-27-2010, 08:55 AM
  5. 20XD/250xs prop test, question...
    By grak in forum Bullet Boats
    Replies: 4
    Last Post: 02-24-2008, 03:54 PM