The only factory recognized spark plug chart is published in the annual dealer's Genuine Parts and Accessories Book.
The following link is a .pdf file of the 2007 chart
http://www.boatsetup.com/Spark...P.pdf
The only factory recognized spark plug chart is published in the annual dealer's Genuine Parts and Accessories Book.
The following link is a .pdf file of the 2007 chart
http://www.boatsetup.com/Spark...P.pdf
-----
A Technical troubleshooter possessing more tools than talent !
Ask and Ye shall recieve Thanks Big Kahuna!
OHHHHH BUT YESSSSSSSS!!!
Seahorse,
Thank you for the pug chart but I was un able to open it. Any tricks?? I did find a good article on decarb of a FICHT. Is this the best method ??
I cannot open either
You need a Adobe reader (I hope I spelled that right) to open the file.
1001 posts, Way to go Ray.
has there been any pic's on the new tiller handle for the evenrude i checked the parts sight and still does not desplay 2006 e-tec 40hp thur 90hp
06 40HP E-Tec 18\' Crestliner Sportsman SS serial# 5128242 model#40hp dplsd
OK, I guess I'm stupid. That chart and my engine are not getting along very well. 1993 Jhonson 175 Fastrike. 158cu. 2589cc. I thought 1000cc.= 1 litre? I rounded it off to 2.5 to match the chart . Something is not right. Probably me. Thanks
You fit in with the 60* V6 Eagle QL78yc.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RUSTY63 »</TD></TR><TR><TD CLASS="quote">You need a Adobe reader (I hope I spelled that right) to open the file.
1001 posts, Way to go Ray. </TD></TR></TABLE>
Rayz....... BIG MOUF!!!! Congrats!!
Appreciate it Champioman. Thats what I'm running know, just checking to see if anything has changed.
have adobe reader 7.3 and it dont open at all for me any ideas? wont open from web site either. Steve
[I]TEAM CORGI DOG[I]
1996 javelin 400T /1996 Johnson 200 Venom
I'm getting an error message saying that the "Operation is not allowed" with Acrobat 6 Pro. Anyone know is the file might have gottne corupted or something?
Thanks,
- Dae
======================
Found my problem. It wasn't Acrobat. It was Firefox. If anyone is using Firefox and can't get the file loaded, try IE.
- Dae
That is way cool. One question under the 150 FICHT it states with pinned cylinder Heads or with Non-Pinned Cylinder Heads, how would I know which one I have ?
Where is a 1992 150HP eagle? Is it the same as 1993-up? I need performance plugs for it before next month!
Yes it is, run the Ql78yc's.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChampioNman »</TD></TR><TR><TD CLASS="quote">Yes it is, run the Ql78yc's.</TD></TR></TABLE>
Hey, CM, better check with Rusty about that !
-----
A Technical troubleshooter possessing more tools than talent !
Mine isn't on there a 1982 Evinrude 75 HP
brow_tines- L77JC4 or QL77JCR
3rd page 9th row down. 60,70,75 (49 cu.in.) 1975-1989