Page 5 of 5 FirstFirst ... 345
Results 81 to 100 of 100
  1. Member haus9393's Avatar
    Join Date
    Mar 2013
    Location
    Plattsburgh, NY
    Posts
    4,013
    #81
    Quote Originally Posted by Crappie Chatt View Post
    Rough water that day! <*)}}}><
    Is there much of a difference between the 10 and 12 clarity wise? i would think the 12 to be better on a normal basis.

  2. Member Crappie Chatt's Avatar
    Join Date
    Feb 2010
    Location
    Lawrence
    Posts
    72
    #82
    I think the 'performance' between the units is too close of a call. Ease of use, Touch wins in a landslide. And ofcourse '12'. I'll be posting some more shots of the HDI transducer & I'll post another StructureScan on speed. <*)}}}><

  3. Member fireslayer's Avatar
    Join Date
    Aug 2009
    Location
    Racine, WI
    Posts
    104
    #83
    Pods of baitfish out on the great lakes


    Pod of bait with fish feeding underneath


    Baitfish in the harbor


    More bait

  4. Member
    Join Date
    Jul 2015
    Location
    Morris, IL
    Posts
    7
    #84
    Here is a boat I recently found at one of the old strip mines in the area...
    Sonar0002_track_1.jpgSonar0002.jpg

    Then some Concrete slabs buried under the mud.
    Incline 1 burried concrete slabs.jpg
    Attached Images Attached Images

  5. Member
    Join Date
    Aug 2009
    Location
    Fresno
    Posts
    101
    #85
    jigging salmon.jpg

    I posted this screen capture because of all the information in each of the views.
    We were jigging for Salmon on the Mokelumne River.

  6. Member fireslayer's Avatar
    Join Date
    Aug 2009
    Location
    Racine, WI
    Posts
    104
    #86
    Recent screenshot from the 3D transducer

  7. Member
    Join Date
    Jul 2010
    Location
    Big Sandy, TX
    Posts
    643
    #87
    HDS Page Layouts

    Understand that you have two(2) StructureScan layout pages:

    The Main Pages Selection StructureScan image is always PAGE-ONE. I always leave this StructureScan(SS).

    When you create a Page Layout:1st StructureScan dragged becomes PAGE-ONE in the layout. Since it is PAGE-ONE it will always match the Main Pages Selection of SS or DI.
    I always leave PAGE-ONE to be StructureScan(SS).

    2nd StructureScan dragged becomes PAGE-TWO in the layout. Always set it opposite of PAGE-ONE.
    I always set PAGE-TWO to be Down Image(DI).

    Example of a Favorite Layout of a "FULL-SCREEN DI screen":
    1st drag StructureScan creating the StructureScan PAGE-ONE.
    2nd drag StructureScan creating the StructureScan PAGE-TWO. Verify or make it DI.
    Now remove PAGE-ONE by dragging out of the layout.
    Save this "FULL-SCREEN DI" Favorite Layout.
    QED

  8. Member fireslayer's Avatar
    Join Date
    Aug 2009
    Location
    Racine, WI
    Posts
    104
    #88
    Some recent screenshots from a structuremap I made recently on a new part of a lake I fish. This technology easily shows the transitions from soft to hard bottom and easily picks out structure. Great tool to have!


  9. Member
    Join Date
    Mar 2010
    Location
    Denton
    Posts
    9
    #89
    Just bought an 04 Skeeter that has a Lowrance HDS5 at the console. It doesn't have a side scan transducer or temp. Can I get both in one ducer or do I have to buy both?

  10. Lowrance/Garmin/GPS Moderator fishin couillon's Avatar
    Join Date
    Jun 2004
    Location
    Pineville, La
    Posts
    33,012
    #90
    Quote Originally Posted by bassfearme View Post
    Just bought an 04 Skeeter that has a Lowrance HDS5 at the console. It doesn't have a side scan transducer or temp. Can I get both in one ducer or do I have to buy both?
    No, you have to buy seperate ducers if you want sonar and structure scan.
    YOU are not entitled to what I have earned!!!!!

    2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS

  11. Member
    Join Date
    Jul 2013
    Location
    Ontario Canada
    Posts
    19
    #91
    Hello , Looking for a little help here Have a hds 9 gen 2 at console and everytime i use my 2d sonar i never see Archs its looks like weeds on the bottom. I know there fish there because ill get them but i can never scan on my 2d cause it always looks the same. Just curious if anyone has any tips. I'm new to lowrance and tryed alot of different settings etc.

    any info would be great

  12. Member thommo59's Avatar
    Join Date
    Apr 2017
    Location
    Australia
    Posts
    651
    #92
    [QUOTE=fishin couillon;1547064]Transferring waypoints from card to unit.

    in the SI pic are all those lines purely caused by the jackplate?



    [/QUOTE
    Are those lines in the SI pic purely caused by the jackplate?
    2018 TRX 18. 2020 Mercury 200 Pro XS V8

  13. Member
    Join Date
    Sep 2004
    Location
    Steilacoom, WA
    Posts
    4,760
    #93
    Yes, both DownScan and SideScan signals bounce in an open jackplate. Images greatly improve with a hole shot plate.

  14. Lowrance/Garmin/GPS Moderator fishin couillon's Avatar
    Join Date
    Jun 2004
    Location
    Pineville, La
    Posts
    33,012
    #94
    As Marc said, yes they are caused by jackplate.....the brand of jackplate i had on that particular boat did not have a hole shot plate nor did they make one. I ended up buying the TSS bracket and shield which lowered the ducer and got rid of the interference.
    YOU are not entitled to what I have earned!!!!!

    2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS

  15. Member
    Join Date
    Apr 2019
    Location
    New Jersey
    Posts
    1
    #95
    Hello all. Wondering if anyone can help with a Lawrence Elite 7HDI. I purchased a used boat and have been storing it in my yard until my marina opens up. Figured I would play around with the chart and make a waypoint for the marina. When I zoomed in on the area, the map was inaccurate. showing water where there is landIMG_6068.JPG(sorry I could not rotate the pic). this is what is should look likeIMG_6091.JPG

    Has any one had something similar? I performed a hard reset and updated the software to the latest version. Wondering if the boat being located approximately 40 miles from the waypoint area has anything to do with it? After review, most of the coast line is way off and no way would I be able to have the chart assist in navigation. Im hoping the chart corrects itself when I get it in the marina. If not, the chart is useless and I need to replace the unit. If there is no fix for this issue, does a navtronics card use its own map and points or does it overlay new points on the units map? Don't want to waste the money if I will still have the same issue. Any suggestions would be appreciated
    Attached Images Attached Images

  16. Moderator TMG's Avatar
    Join Date
    Apr 2006
    Location
    New Hampshire
    Posts
    31,970
    #96
    Welcome aboard Mathew.
    I would try starting a new thread.
    " Talking to you is like clapping with one hand "
    Anthrax

  17. Member
    Join Date
    Jun 2016
    Location
    Washington
    Posts
    14
    #97
    Quote Originally Posted by Marc Marcantonio View Post
    Yes, both DownScan and SideScan signals bounce in an open jackplate. Images greatly improve with a hole shot plate.
    I bought new HDS lives, mounted transducer in same place as HDS Gen 3 (not on the jackplate) and have these lines on the left side of my active imaging 3-n- 1 ducer.

  18. Member
    Join Date
    Sep 2017
    Location
    METAIRIE,LA
    Posts
    333
    #98
    i found that the charts that come with lowrance are very poor.
    i have had Gen 3 and currently Carbon models.
    i went with Navionics sd card and have been very pleased with the detail.
    they also give a Satellite view of your area so they are pretty accurate.
    check out their web site.
    john

  19. Member
    Join Date
    May 2020
    Location
    Raleigh, NC
    Posts
    1
    #99
    Has anyone seen this issue on an HDS Live? Notice how the slanted lines appear to go below the bottom. I have an HDS 7 on the bow and HDS 9 at the console. Networked with NMEA and LAN. The diagonal lines appear only when the HDS 7 is on, and the lines appear on both screens slanted the opposite direction. When I turn off the HDS 7, the slanted lines go away on the HDS 9. If I use the bow transducer networked to my console HDS 9, no lines. (Transducer in the bow is whatever comes with Lowrance Ghost trolling motor. ). Hoping someone has seen this and knows the issue before I charge the windmill at Lowrance. Thanks.

    B4BF50FA-AA44-401E-98C7-66B1173C319D.jpeg

  20. Member
    Join Date
    Apr 2014
    Location
    Atlanta
    Posts
    901
    #100
    Running the same frequency?

    Then you will get cross talk.

Page 5 of 5 FirstFirst ... 345

Similar Threads

  1. ***Lowrance Structure Scan and Down Scan images from the past***
    By Fishton in forum Lowrance Image Interpretation
    Replies: 587
    Last Post: 08-28-2019, 04:59 PM
  2. Hds screen shots from today
    By haveme1 in forum Mississippi Fishing
    Replies: 3
    Last Post: 04-14-2011, 11:49 PM
  3. My first screen shots
    By 11pounder in forum Humminbird Image Interpretation
    Replies: 7
    Last Post: 10-04-2010, 05:26 AM