Page 2 of 76 FirstFirst 12341252 ... LastLast
Results 21 to 40 of 1517
  1. Member Doug Vahrenberg's Avatar
    Join Date
    Sep 2005
    Location
    Higginsville, MO
    Posts
    12,741
    #21

    Re: (mduncan62)

    They may have gone out on the water after the Classic and Expo...they do that often to show what the anglers where fishing.

    Here are more REAL IMAGES

    Old Rail Road Bed with Ties....see all the fish and baitfish????



    Zoom Version!



    Here is the SI Image that was used when Contour Mode was introduced...the depth is not on top of the track like the 360 Imaging is but can be used for comparison.



    Contour Mode Turned On...



    More to Come...

    --


    http://www.dougvahrenberg.com/

    BASS Central Open- Competitive Bass Angler and Humminbird Guru
    Visit my website to learn about my sponsor's products, fishing tips and techniques.

    Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/

  2. Member Doug Vahrenberg's Avatar
    Join Date
    Sep 2005
    Location
    Higginsville, MO
    Posts
    12,741
    #22

    Re: (mduncan62)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by mduncan62 &raquo;</td></tr><tr><td class="quote">A few of those screen shots, the depth doesn't seem to make sense. </td></tr></table>

    Direct from the operator that tested the 360 Imaging:

    "There was no 2d sonar plugged in on early prototypes. This is why digital depth isnt correct in those image."

    You are seeing images from the testing of the prototype 360 imaginh...they were more concerned about test the 360 imaging at that point. Thanks for pointing out but you can be assured that the product is fully functional to display depth from the 2D 200kHz readings when hooked to your unit.

    Keep the Questions coming! We will get you the answers. And watch for more to come!

    --


    http://www.dougvahrenberg.com/

    BASS Central Open- Competitive Bass Angler and Humminbird Guru
    Visit my website to learn about my sponsor's products, fishing tips and techniques.

    Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/

  3. Member
    Join Date
    Dec 2008
    Location
    Valdosta
    Posts
    71
    #23
    Is there a digital signal processor in the mounting unit?


    Sorry the missed the line above that says no talking about internal components.


    Modified by fsae99 at 10:45 AM 2/29/2012

  4. Member
    Join Date
    Feb 2010
    Location
    Madison
    Posts
    213
    #24

    Re: (Doug Vahrenberg)

    Doug,

    Will the readouts go away like they are promising on the new 898 updates?

    Can you get views on an 898 for comparison?

    On the railroad ties picture above, it looks like the rocks south of boat curve. what is causing that?

    Will Brian at BBG offer a BBC discount?

  5. Banned
    Join Date
    Mar 2009
    Location
    HeartLand, MO
    Posts
    546
    #25

    Re: (Stymie)

    Might help to see the images on the same color palette.

  6. Member Doug Vahrenberg's Avatar
    Join Date
    Sep 2005
    Location
    Higginsville, MO
    Posts
    12,741
    #26

    Re: (fsae99)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by fsae99 &raquo;</td></tr><tr><td class="quote">Is there a digital signal processor in the mounting unit?


    Sorry the missed the line above that says no talking about internal components.&lt;br /&gt;&lt;br /&gt;
    Modified by fsae99 at 10:45 AM 2/29/2012</td></tr></table>

    I have no idea and never heard where the Signal Processing takes place.

    --


    http://www.dougvahrenberg.com/

    BASS Central Open- Competitive Bass Angler and Humminbird Guru
    Visit my website to learn about my sponsor's products, fishing tips and techniques.

    Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/

  7. Member Doug Vahrenberg's Avatar
    Join Date
    Sep 2005
    Location
    Higginsville, MO
    Posts
    12,741
    #27

    Re: (Stymie)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Stymie &raquo;</td></tr><tr><td class="quote">Doug,

    Will the readouts go away like they are promising on the new 898 updates?

    Can you get views on an 898 for comparison?

    On the railroad ties picture above, it looks like the rocks south of boat curve. what is causing that?

    Will Brian at BBG offer a BBC discount?</td></tr></table>

    I have not seen anything except on an 1198c...the display 360 Imaging System and 1198c was the only components they had at the Classic and the only one with software capable at that time to display it .

    That looks more to me like a wider area of rocks than a curve...just below the boat? I don't know if these are at the exact same spot on the track but I know these are the same railroad tracks that were captured with two different technologies and using them to compare SI to 360 Imaging.

    You'll have to ask BBG on that question.

    --


    http://www.dougvahrenberg.com/

    BASS Central Open- Competitive Bass Angler and Humminbird Guru
    Visit my website to learn about my sponsor's products, fishing tips and techniques.

    Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/

  8. Member Doug Vahrenberg's Avatar
    Join Date
    Sep 2005
    Location
    Higginsville, MO
    Posts
    12,741
    #28

    Re: (mduncan62)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by mduncan62 &raquo;</td></tr><tr><td class="quote">Might help to see the images on the same color palette. </td></tr></table>

    That's the only color pallet I have of SI and 360 Imaging of the same Structure.

    I'll look for more images that may be able to help you see the same structure in the same color pallet.

    --


    http://www.dougvahrenberg.com/

    BASS Central Open- Competitive Bass Angler and Humminbird Guru
    Visit my website to learn about my sponsor's products, fishing tips and techniques.

    Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/

  9. Member
    Join Date
    Dec 2008
    Location
    Valdosta
    Posts
    71
    #29
    Currently takes place inside of a HB head unit. In Lowrance units it takes place in the LSS-1 box.

  10. Member Doug Vahrenberg's Avatar
    Join Date
    Sep 2005
    Location
    Higginsville, MO
    Posts
    12,741
    #30

    Re: (fsae99)

    I know on all the other products it's controlled in the Head Unit. This might be the reason Humminbird is not limited in the number of units it can share to via Ethernet. You can use the 5 Port Hubs and even Stack them and share to even more units. There is no limit to the number of units Ethernet Accessories can be shared to with Humminbird.

    --


    http://www.dougvahrenberg.com/

    BASS Central Open- Competitive Bass Angler and Humminbird Guru
    Visit my website to learn about my sponsor's products, fishing tips and techniques.

    Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/

  11. Banned
    Join Date
    Mar 2009
    Location
    HeartLand, MO
    Posts
    546
    #31

    Re: (Doug Vahrenberg)

    Might want to check that "no limit" with the engineers. Although, clearly there is a logical limit of how many head units you would put on a boat.

    Has to feel pretty good to finally be getting what the other team has had for years. I think you'll like it.

  12. Member Doug Vahrenberg's Avatar
    Join Date
    Sep 2005
    Location
    Higginsville, MO
    Posts
    12,741
    #32

    Re: (mduncan62)

    If you want to invest in 500 SI Units and 167 Ethernet 5 Port Hubs and lots of cables you can share the 360 Imaging plus 2D, SI, DI and all ethernet accessories to all units! Even NEMA 2000 Data, Radar, etc that Humminbird has.

    Your right most people are not going to have 500+ units on their boat but they could. Many are running 3, 4, 5 Units now and You can share all the sonars on All the units when they use same technology.

    Personally 360 Imaging will be the only Sonar Technology I would share because I want my SI,DI and 2D from the bow. But I have the ability to share it if I ever want too. I run SI transducers at both locations and it gives me alot more versatility to share data with the console from the Trolling motor SI or vice a versa.

    Good to see you interest in Humminbird Products again! Welcome Back! Humminbird Industry Leading Innovation must have you curious???

    Want to go for a ride when I get mine???




    --


    http://www.dougvahrenberg.com/

    BASS Central Open- Competitive Bass Angler and Humminbird Guru
    Visit my website to learn about my sponsor's products, fishing tips and techniques.

    Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/

  13. Member Doug Vahrenberg's Avatar
    Join Date
    Sep 2005
    Location
    Higginsville, MO
    Posts
    12,741
    #33

    Re: (Doug Vahrenberg)

    BASSmaster Videos on Humminbird 360:

    The Intro and Hardware:
    http://bcove.me/75a46nvc

    On the Water:
    http://bcove.me/mnirc2rc

    Some of the Software Features:
    http://bcove.me/m5jgt869

    More to come...

    --


    http://www.dougvahrenberg.com/

    BASS Central Open- Competitive Bass Angler and Humminbird Guru
    Visit my website to learn about my sponsor's products, fishing tips and techniques.

    Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/

  14. Member
    Join Date
    Mar 2009
    Location
    MI
    Posts
    736
    #34

    Re: (Doug Vahrenberg)

    If a SI has a narrow beam what type of beam does the 360 have ? is it again just a narrow beam but like it is turned 180deg from SI

    Is this like down imaging and side imaging combined in a 360 scan ?

    If this is the proto type are they in production or do they still need to work out bugs ?

  15. Member Doug Vahrenberg's Avatar
    Join Date
    Sep 2005
    Location
    Higginsville, MO
    Posts
    12,741
    #35

    Re: (Bass Boat TR21x05)

    It's imaging but no one knows what's inside the Imaging Dome that creates the "Magic" that is a trade secret.

    It does cover complete water column coverage from the surface to the bottom 360° around the boat.

    The units will be available in August 2012. I'm sure between now and then there will be even more testing and data collecting to make sure it's a smooth release when the first units come off the production line for customers. Like any product the proptypes are built then preproduction units then production models. Humminbird has been working on this project for a while and introdcued the technology last week now it's time to gear up and start manufacturing the units for the August Release. The Process is no different then when new products are introduced at ICAST for the next model year it takes time from introduction until products start rolling off the assembly line in Eufuala Alabama.

    --


    http://www.dougvahrenberg.com/

    BASS Central Open- Competitive Bass Angler and Humminbird Guru
    Visit my website to learn about my sponsor's products, fishing tips and techniques.

    Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/

  16. Moderator
    Join Date
    Nov 2006
    Location
    Acworth, GA
    Posts
    3,341
    #36

    Re: (Doug Vahrenberg)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Doug Vahrenberg &raquo;</td></tr><tr><td class="quote">

    Good to see you interest in Humminbird Products again! Welcome Back! Humminbird Industry Leading Innovation must have you curious???

    Want to go for a ride when I get mine???

    </td></tr></table>



    Atlanta, GA Bass Fishing Guide/Swimbait Mfg
    http://www.BullShad.com

  17. Banned
    Join Date
    Oct 2007
    Location
    Catlettsburg
    Posts
    13,542
    #37

    Re: (mduncan62)

    this is just crazy

  18. Banned
    Join Date
    Mar 2009
    Location
    HeartLand, MO
    Posts
    546
    #38

    Re: (T Mike)

    I knew tmike would shock me with something funny. Nice


    I'm interested in all electronics. This new innovation while good for some, will have a limited market. I'd agree with the others who said they would have rather just heard the HB changed the screens on the 7, 8, and 9 units so they are sunlight viewable.

    I still believe that having even the gps puck and the 360 contraption mounted on the transom, will limit how you use to really target structure. It's always going to be at least the length of your boat off from where you are standing on the bow. This would mean that if you see a stakebed that appears to be right in front of your boat on 360, you've probably already passed over it.

    Maybe for bass fishing where you make long casts this is really great. I could see where that would be the case.

  19. Member
    Join Date
    Feb 2010
    Location
    Cowaramup Bay, Australia
    Posts
    743
    #39

    Re: (mduncan62)

    You have to be kidding right?

    SI or Structure Scan is fantastic and I have had SI from the start or if I started with Structure Scan it would not matter, Side Imaging technology whatever name, SI or SC is universally accepted as the ants pants. How do you compare it with 360? Side Imaging is one slice of history. That is all you get one slice of history pieced together to form what looks like a continuous image. A fantastic image nevertheless full of information. Yes the structure won't move so that history remains accurate, but once you have gone past each position at each instant you don't know what the fish are doing or even if they are still there. 360 regularly updated the entire screen all 360 degrees. It is only history for a few seconds and it is current again. In SI or SC the only thing which is constantly live is one thin line of pixels running at 180 degrees from the boat. If someone cannot recognize the value of this new technology then I don't know what. I don't care if it is HB or L that brought us 360 I will go with who's got it. Am I a Humminbird dealer? Yes and proud of it. If I was a L dealer I would be proud of that. So what. Lets talk technology and learn about it, not score points.
    John

    Solix 12, Helix 12, Onix 10

  20. Member Meleagris1's Avatar
    Join Date
    May 2010
    Location
    New York
    Posts
    4,155
    #40
    Would be really interested in seeing how power pole guys are going to mount this. I am really excited about tryibg the 360, but I am not giving up my dual Power poles!
    ________________________________________________
    2024 Phoenix 21 XE - Mercury 250 PRO XS Serial #3B429919
    2017 Phoenix PHX 21 - Yamaha 250 SHO
    2010 Skeeter 20i - Yamaha 250 SHO
    1988 Procraft 1780 Competitor - Mercury 100

Page 2 of 76 FirstFirst 12341252 ... LastLast

Similar Threads

  1. LakeMaster Mapping Information Resource
    By Doug Vahrenberg in forum Humminbird Sonar/GPS
    Replies: 636
    Last Post: 03-14-2024, 11:40 AM
  2. Installation & Networking Information Resource
    By Doug Vahrenberg in forum Humminbird Sonar/GPS
    Replies: 375
    Last Post: 03-29-2023, 05:20 AM
  3. All Sonar Information Resource
    By Doug Vahrenberg in forum Humminbird Sonar/GPS
    Replies: 39
    Last Post: 02-20-2022, 01:10 PM