Results 1 to 2 of 2
  1. #1
    Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,330

    FAQ about props

    Mark sells Mercury Flo-Torq hub kits for $55 shipped to lower 48 states

    Mark's Order Form Page and Price List, Mark takes Mastercard and Visa. http://www.bassboatcentral.com/marksprops1.htm

    Prop Calc... Read this first http://www.go-fast.com/prop_slip.htm

    Prop Slip Calculator http://www.go-fast.com/Prop_Slip_Calculator.htm

    How a boat propeller is made...
    PPI/Turbo/Yamaha:



    Mercury Marine:



    OMC propeller hardware part numbers. http://www.henrysmith.com/hardwareomc.htm

    Mercury Flo-Torq Hub/MI Wheel Part Numbers
    http://sites.mercurymarine.com...F.PDF

    Michigan Wheel http://www.miwheel.com/FilesCu...8.pdf


    Hub kit installation>>>
    http://www.mercurymarine.com/m...q.pdf





    [b]Flo-Torq II 840389K06 Mercury Hub Kit


    Flo Torq 835258Q 2




    [img]



    Measuring motor height... http://www.bassboatcentral.com/measuring.htm


    This is the magical work Mark can do, More than just a repair.

    It's obvoius there is nowhere else you should send your prop for repairs.


    BEFORE



    AFTER



    BEFORE


    AFTER


    When sending USPS, If you are going to send your propeller by usps and i have to sign for it and I'm not here they will take it back to the post office. If we are real busy it might take us a few days to get your propeller. We have a new carrier and she will not sign for it and put it in my shop like my old driver. If you send it with out a signature required they will leave the propeller.
    Thanks Mark


    PVS plugs and purpose
    Mark now sells the pvs plugs

    http://www.mercurymarine.com/p...Plugs/

    http://www.mercurymarine.com/m...S.pdf

    http://sites.mercurymarine.com...ORTAL

    http://www.marinemechanic.com/...g.htm

    http://www.marinemechanic.com/site/page76.html

    http://www.ptprop.com/index.ph...id=51

    Mark's & Hydromotive,
    PROP REPAIR & MODIFICATIONS
    Mark’s High Performance Propellers and Hydromotive Engineering Co. would like to clear up some misunderstandings in regards to propeller repair and modifications to Hydromotive propellers. Mark’s High Performance Propeller does repair and modify some of Hydromotive’s props when Hydromotive is overloaded with work, so as to get the work out to their customers in a timely fashion. All work sent in by Hydromotive has work orders attached to the props specifying the exact details of work to be performed by Mark’s High Performance Propeller. In no way does Mark’s perform any work to props sent in by Hydromotive, other than the work specified on their work orders. Mark’s does spec out work for their customers only, and not Hydromotive’s customers.

    Everything You Need To Know About Propellers http://www.turbo-props.com/prop101.php

    How to change a propeller

    http://www.mercurymarine.com/p...0Prop/

    How to pick the right pitch for your boat

    http://www.mercurymarine.com/p...pitch/

    Prop data base

    http://www.bwbmag.com/propsear...ptype=






    A = Flo-Torq III Drive Sleeve, Delrin/Titanium, Mercury part # 881940A 1

    B = Aft Adaptor, Silicon Bronze, Mercury part # 878584, common to both the Flo-Torq III and IV

    C = Flo-Torq IV Drive Sleeve, Delrin/Titanium, Mercury part # 896232

    D = Aft Adaptor, Silicon Bronze, Mercury part # 826074, common to almost all Flo-Torq II kits

    E = Flo-Torq II Drive Sleeve, Delrin, Mercury part # 835290Q 1, common to almost all Flo-Torq II kits

    F = Thrust Washer, Mercury part # 12-835467 1, common to the Flo-Torq II, III and IV kits for Mercury (except 225 HP EFI Four Stroke (Mercaha)

    G = Prop Nut, Brass Nylock, Mercury part # 11-827614, common to the Flo-Torq II, III and IV kits, 1/2" - 13 thread will fit Mercury, OMC, Bombardier, Honda and Suzuki mid-range and V-6 outboards as well as MerCruiser Alpha One sterndrives. (I believe Yamaha uses a metric threading)

    H = Tab Washer, Stainless Steel, Mercury part # 14-816629, common to the Flo-Torq II, III and IV kits for Mercury






    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  2. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,330
    #2

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

Similar Threads

  1. Mark's Razor Props
    By Largemouthlou in forum Stroker Boats
    Replies: 6
    Last Post: 04-01-2011, 08:58 AM
  2. Mark's Props
    By Rebel1 in forum Blazer Boats
    Replies: 4
    Last Post: 03-18-2008, 08:22 AM
  3. Mark's Props
    By Mike Daleo in forum Kentucky Fishing
    Replies: 4
    Last Post: 05-10-2007, 03:33 AM
  4. best place/price to order John/rude out board oils
    By Chadc77 in forum Evinrude/Johnson Motors
    Replies: 10
    Last Post: 01-05-2006, 08:23 PM