Page 2 of 5 FirstFirst 1234 ... LastLast
Results 21 to 40 of 91
  1. Member
    Join Date
    May 2005
    Location
    Lees Summit MO
    Posts
    7,970
    #21

    Re: Fish Structure (rudapa)

    Russ - what did you use as the exterior of the block? I'm think of making some of these!!

  2. Mid-West Rally Moderator rudapa's Avatar
    Join Date
    Apr 2005
    Location
    Beaver Lake, NE
    Posts
    36,734
    #22

    Re: Fish Structure (catchatoad)

    Catchatoad, we take an 8" X 8" single hole cinder block, then wire 9 (30" to 36") pieces of 1/2" irrigation pipe together, drop it in the block, arrange the pipe out so it makes a bush, fill the cinder with cement until full and heaped a little on the top, then put a bent nail in the cement so I have a handle to drop them with. They are really simple.

  3. Member
    Join Date
    May 2005
    Location
    Lees Summit MO
    Posts
    7,970
    #23

    Re: Fish Structure (rudapa)

    Can you get the 8x8 blocks at Home Depot or Lowes?

  4. Mid-West Rally Moderator rudapa's Avatar
    Join Date
    Apr 2005
    Location
    Beaver Lake, NE
    Posts
    36,734
    #24

    Re: Fish Structure (catchatoad)

    They should have them. I got them at Menards and it is the same as a Home Depot or Lowes. I made a batch before these in 5 gallon buckets and they were really good looking, but they take a 60 lb bag of cement each, 15 pipes, and weigh around 65 pounds. The couple we made out of the single cinders that first batch were much easier to deal with and much cheaper. You can also do them with the regular 2 hole cinder blocks. You just need to come up with a way to lower them so they sit upright.

  5. Member
    Join Date
    May 2005
    Location
    Lees Summit MO
    Posts
    7,970
    #25

    Re: Fish Structure (rudapa)

    thanks Russ!!

  6. Member Triton180DC's Avatar
    Join Date
    Mar 2006
    Location
    Paris, AR
    Posts
    902
    #26

    Re: Fish Structure (rudapa)

    look great, can u make them double stack? I think that would be the way to go if they can stand up!

  7. Member HaulinBass's Avatar
    Join Date
    Jun 2004
    Location
    Springfield
    Posts
    6,323
    #27

    Re: Fish Structure (rudapa)

    Found some in clear water on Table Rock recently. Large Bass cruising around them. It seem the flexible pipe was wider in diameter though, don't think that will make a difference.
    Larry Eby, 2004 ChampioN 188 Elite/2003 200 Hp Vmax OX66
    "Romans 10:9"

  8. Mid-West Rally Moderator rudapa's Avatar
    Join Date
    Apr 2005
    Location
    Beaver Lake, NE
    Posts
    36,734
    #28

    Re: Fish Structure (HaulinBass)

    Our fishing club made some and they used the heavier pipe 1 5/8". I prefer the smaller diameter better, but I believe either will work. Having cover placed in the right place is always going to draw fish.

    I don't think I would stack them to make them taller, they would be too easy to knock over if someone snags one somehow, especially with some heavy braid.

  9. Member
    Join Date
    Aug 2005
    Location
    Tupelo
    Posts
    265
    #29

    Re: Fish Structure (rudapa)

    Man, those are great! I can just imagine a "grove" of those things to fish in and over!

  10. Moderator BassnCop's Avatar
    Join Date
    Oct 2004
    Location
    Suffolk, Va
    Posts
    13,728
    #30

    Re: Fish Structure (rudapa)

    nice idea!!

    "Team Law & Disorder"

  11. Member
    Join Date
    Oct 2004
    Location
    Courtland
    Posts
    273
    #31

    Re: Fish Structure (BassnCop)

    Good idea

  12. Mid-West Rally Moderator rudapa's Avatar
    Join Date
    Apr 2005
    Location
    Beaver Lake, NE
    Posts
    36,734
    #32

    Re: Fish Structure (lilFireBassr)

    The irrigation pipe does show up on sonar, so who ever told me that was wrong. Anyway we got ours all put in and they look pretty sharp on the sonar. I wish they were in stealth mode, but cover in the right places is better than nothing.


    Modified by rudapa at 6:08 PM 3/31/2006

  13. Member
    Join Date
    Jun 2004
    Location
    Lake City
    Posts
    9,267
    #33

    Re: Fish Structure (rudapa)

    dude, those look pretty good.

  14. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,351
    #34

    Re: Fish Structure (BassnCop)

    These are more expensive... I like your idea.... I like the larger pipe though... Hmmmmm. I may have to make some of these.

    http://www.jandjhabitat.com/index.php


    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  15. Mid-West Rally Moderator rudapa's Avatar
    Join Date
    Apr 2005
    Location
    Beaver Lake, NE
    Posts
    36,734
    #35

    Re: Fish Structure (21XDC)

    If you are running the pipe all the way through it would reduce the amount of concrete you needed in the bucket, plus you could add some irrigation pipe out the top as well. Not a bad deal, just more work and more cost. We made some out of the buckets and they were HEAVY dudes.

  16. Member
    Join Date
    Jun 2004
    Location
    Glenpool, OK
    Posts
    8,975
    #36

    Re: Fish Structure (rudapa)

    only put enough concrete in the buckets to set the tubing then place about 5 lbs of dry dog food then fill the buckets up with lake gravel once your at the lake it will draw the bait fish quicker as the dog food breaks up and floats out did you set these with a pontoon boat ? it looks size wise you couldnt carry very many on a trip ?

  17. Mid-West Rally Moderator rudapa's Avatar
    Join Date
    Apr 2005
    Location
    Beaver Lake, NE
    Posts
    36,734
    #37

    Re: Fish Structure (gambler4)

    We used the buddies tracker (this is not work for the Triton ). We could haul 9 at a time in his V18. Set them in sets of 3. A pontoon would be MUCH easier.

  18. Member HaulinBass's Avatar
    Join Date
    Jun 2004
    Location
    Springfield
    Posts
    6,323
    #38

    Re: Fish Structure (gambler4)

    Dude, you sure you ain't a hillbilly? That is a blow you away idea! "fill it with dog food, and gravel at the lake.", , LOL. Like scattering corn before Turkey season, just to help the critters sustain themselves through the hunt you know... It ain't about baiting the woods.
    Larry Eby, 2004 ChampioN 188 Elite/2003 200 Hp Vmax OX66
    "Romans 10:9"

  19. Member
    Join Date
    Apr 2006
    Location
    brownsville
    Posts
    7
    #39

    Re: Fish Structure (HaulinBass)

    I really like this design. I would like to ask about the dog food idea. I was told it needed to be a corn based dog food. I would like some feed back on this. I've been told to use cannned dog food. Punch small holes in the top of the can and push the can down into the wet concrete of you fish attractor. It will slowly leak out and attracted your bait fish. But my original question is does it matter what type of dog food to use?


    Modified by triddle at 6:45 AM 4/26/2006

  20. Member
    Join Date
    Jun 2004
    Location
    Glenpool, OK
    Posts
    8,975
    #40

    Re: Fish Structure (triddle)

    i dont think it matters

Page 2 of 5 FirstFirst 1234 ... LastLast

Similar Threads

  1. March Tip of the Month Poll
    By FireBassr in forum Clever Tips & Ideas
    Replies: 0
    Last Post: 03-31-2006, 06:23 AM
  2. Tandem Trailer Tire change - (MARCH TIP OF THE MONTH)
    By srode in forum Clever Tips & Ideas
    Replies: 19
    Last Post: 01-19-2006, 04:20 PM
  3. Tip of the Month (March)
    By spetro in forum Clever Tips & Ideas
    Replies: 3
    Last Post: 04-02-2005, 10:26 AM