Throttle roller timing arm adjustment

**prawntrap** · 04-03-2010, 07:39 PM

i have a 1997 johnson 150 ocean runner. I looked at the Throttle roller timing arm and mine is not touching the plate. It looks like the one that is in the incorrect position as shown on the pictures in the post. The engine is running fine. Do I need to loosen the screw and make it touch the plate as described on the post as a preventitive measure or am I ok to leave it as is?

Thanks

**ChampioNman** · 04-04-2010, 06:46 AM

I would adjust it.

**prawntrap** · 04-04-2010, 08:35 AM

Thanks, will do...

**prawntrap** · 04-05-2010, 07:50 AM

One more question, by doing this I won't throw the carb. throttle cam out of adjustment will I ?
Thanks

**ChampioNman** · 04-05-2010, 12:25 PM

Nope.

Thread: Throttle roller timing arm adjustment

Thread Tools

Search Thread

Display

Throttle roller timing arm adjustment

Re: Throttle roller timing arm adjustment (prawntrap)

Re: Throttle roller timing arm adjustment (ChampioNman)

Re: Throttle roller timing arm adjustment (prawntrap)

Re: Throttle roller timing arm adjustment (prawntrap)

Similar Threads

RE: Throttle roller timing arm adjustment 60* motors

Throttle roller timing arm adjustment 60* motors

throttle roller/timing arm adjustment?

2003 Johnson 150 - throttle roller timing arm adjustment

Throttle roller timing arm adjustment 60* motors