Page 2 of 7 FirstFirst 1234 ... LastLast
Results 21 to 40 of 134
  1. #21

    Re: Lets see some pics of your custom built rods (Ky 521)

    just messin' around....



    a donated rod 'for the Troops"




    I never had a \"10\".....but, one night, I did five \"2\'s\"

  2. Member
    Join Date
    Feb 2010
    Location
    Purcellville
    Posts
    23
    #22

    Re: Lets see some pics of your custom built rods (Ky 521)

    Here's mine....(the pic isn't the best...better at rod building than photgraphy!!)

  3. Member
    Join Date
    Feb 2010
    Location
    Vancouver
    Posts
    60
    #23

    Re: Lets see some pics of your custom built rods (Ky 521)

    Here are some pics of rods i built over the last few years.. new pics on the way soon..













    These are just my personal rods and prototypes..

    I know that having no fore grip at all is popular these days but that's not my favorite look so i do little 1" fore grips so you can still touch the blank while fishing



  4. Member
    Join Date
    Feb 2010
    Location
    Purcellville
    Posts
    23
    #24

    Re: Lets see some pics of your custom built rods (Rob_Allen)

    George Roth calls it a "Comfort Button"

  5. Member
    Join Date
    May 2009
    Location
    Scarborough
    Posts
    1,098
    #25

    Re: Lets see some pics of your custom built rods (Ky 521)


  6. Goby King
    Join Date
    Sep 2006
    Location
    Rostraver Twp., PA
    Posts
    4,083
    #26

    Re: Lets see some pics of your custom built rods (Scarboroughsouth)


  7. Member
    Join Date
    Aug 2004
    Location
    Headland, AL
    Posts
    1,657
    #27

    Re: Lets see some pics of your custom built rods (Ky Z21)

    Here is a new 7'-6" cranking rod I completed this week. It is built on a Castaway 904 blank from Swampland with blue burl cork grips, ECSM reel seat and Fuji BLAG micro's.

















    Modified by sarmst100 at 3:39 PM 2/7/2011
    1999 Champion 203
    2000 Yamaha OX66 225

  8. Member
    Join Date
    Mar 2009
    Location
    Springfield
    Posts
    1,292
    #28

    Re: Lets see some pics of your custom built rods (Scarboroughsouth)


    MHX 844 spiral micros


    Loomis IMX 783


    Rx8 6'-6"


    Rx8 6'-8" drop shot rod

    Ron S


  9. Member
    Join Date
    Feb 2010
    Location
    Purcellville
    Posts
    23
    #29

    Re: Lets see some pics of your custom built rods (Ky Z21)

    St Croix SCIII blank (Avid Pearl). Polymer grips, fuji ACS reel seat, American Tackle guides w/ Nanolite rings.

  10. Member
    Join Date
    Feb 2010
    Location
    Purcellville
    Posts
    23
    #30

    Re: Lets see some pics of your custom built rods (Ky Z21)

    2nd pic...two more rods.

  11. Member
    Join Date
    Apr 2007
    Location
    Maysville Ky 41056
    Posts
    561
    #31

    Re: Lets see some pics of your custom built rods (MarkBVa)

    Name Woven in thread !!



  12. Member thedude's Avatar
    Join Date
    Sep 2005
    Location
    Lowell, MI
    Posts
    1,271
    #32

    Re: Lets see some pics of your custom built rods (ddot)

    My new years resolution was to finish the last personal rod i never had time to do all last year - thus completing all my personal 2010 rods almost in 2010!




    these were some bargain bin castaway HG40 blanks that were quite nice - especially for the 12$ a piece i paid for them! 2 flipping sticks, a 6'8" topwater, and the far right is a ranishadow rx7 7'0"er

    i've had a friend of mine working on metal end caps and these all have the first revision of them. I'm using a 1/4 piece of rubberized cork around the edges of it. Couple tweaks to the new ones and i will have a nice end cap system that will also serve as a means for adding balance weights.

  13. Member Cpt. Morgan's Avatar
    Join Date
    Jun 2008
    Location
    Toronto, ON
    Posts
    460
    #33

    Re: Lets see some pics of your custom built rods (thedude)

    Dude those look cool! Would like to see a close up of the end caps.
    Nice work.
    @captainmorganlegend

  14. Member nektarios's Avatar
    Join Date
    Jan 2009
    Location
    Toronto, Ontario
    Posts
    4,152
    #34

    Re: Lets see some pics of your custom built rods (Cpt. Morgan)

    Here is a wacky worm rod I am building. The guides get wrapped tonight!




    I tried the crackle paint on the reel seat. I used to much black paint, it didn't crackle. So to save it a did a light spray of red.

  15. Member
    Join Date
    Mar 2008
    Location
    Chapmanville
    Posts
    574
    #35

    Re: Lets see some pics of your custom built rods (nektarios)

    MHX SJ843





  16. Member
    Join Date
    Nov 2010
    Location
    Huntsville AL
    Posts
    314
    #36

    Re: Lets see some pics of your custom built rods (the_crab)

    MHX FS906 -- 7'6" XH Flippin' Stick. This is my second build. Wish I wouldve went with a Fuji ECS reel seat, but not too big a deal. Spiral wrapped to 4mm batson micros.








    Naaman

  17. BBC Fantasy Fishing Organizer BasserJim's Avatar
    Join Date
    Oct 2004
    Location
    Ahrensville, PA
    Posts
    20,766
    #37

    Re: Lets see some pics of your custom built rods (Crafter of Rods)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Crafter of Rods &raquo;</td></tr><tr><td class="quote">Maybe you were 'corked' while working on these cork grips, but, very nice 'corkwork' dude

    </td></tr></table>

    Scott is the best forking corker that I know.... Maybe here in the next couple days I will post some pictures of some of the rods that he has built for me

  18. Member
    Join Date
    Feb 2011
    Location
    Illinois
    Posts
    16
    #38

    Re: Lets see some pics of your custom built rods (shfishinsticks)

    Here are my first two builds.

    Pine handle, 6' MH rebuild


    Claro Walnut, 7' Heavy Full build

  19. No Bullchit cd4th's Avatar
    Join Date
    Mar 2005
    Location
    Marseilles, IL.
    Posts
    8,102
    #39

    Re: Lets see some pics of your custom built rods (Go Time)






  20. Member
    Join Date
    Aug 2004
    Location
    Headland, AL
    Posts
    1,657
    #40

    Re: Lets see some pics of your custom built rods (cd4th)

    Beautiful Work!! Most weaves are a little too much but that one is just right. Great colors.
    1999 Champion 203
    2000 Yamaha OX66 225

Page 2 of 7 FirstFirst 1234 ... LastLast

Similar Threads

  1. Lets see some pics of your custom painted baits.
    By RangerCy in forum Rod Building & Tackle Making
    Replies: 192
    Last Post: 04-18-2018, 04:29 AM
  2. Custom built Boat Trailer
    By JimmyE in forum South Carolina Fishing
    Replies: 2
    Last Post: 01-15-2012, 04:47 PM
  3. Who do you recommend for Custom Built Rods?
    By stalking coyote in forum Rod Building & Tackle Making
    Replies: 3
    Last Post: 03-02-2010, 04:56 AM
  4. Custom built G Loomis and St Croix rods!
    By bass5aday in forum Virginia Fishing
    Replies: 1
    Last Post: 09-10-2008, 05:50 PM
  5. Built my first custom rod....
    By Scuba Scott in forum Rod Building & Tackle Making
    Replies: 5
    Last Post: 07-26-2007, 06:31 PM