Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Aug 2013
    Location
    Fort Worth, TX
    Posts
    18

    2012 Eyra - Rivets in the Metal Piece at Transom/Top Cap Joint

    Hello All, should I be concerned about the two rivets circled in green coming loose on my 2012 Eyra? I haven't seen any stress cracks yet, but the silver flake hides everything. The split at the end of the metal piece has been there for as long as I can remember.
    Attached Images Attached Images

  2. Member
    Join Date
    Dec 2017
    Location
    Cambridge IL.
    Posts
    1,414
    #2
    Best to disassemble and inspect for water intrusion and transom condition. If all is well replace the aluminum trim and rivets. Seal all with BCB approved sealant.

  3. BBC SPONSOR Bass Cat Boats's Avatar
    Join Date
    Jul 2004
    Location
    Mountain Home
    Posts
    15,141
    #3
    It’s likely something impacted the case and put pressure on the trim, shearing the rivet heads. Yes, replace those and watch for further developments.