have 126sv ultra 2 one console one at bow when turn on console bow turns on also any way to stop this
have 126sv ultra 2 one console one at bow when turn on console bow turns on also any way to stop this
3 of my 4 units do this on my boat because they are networked together. I'm not a fan either but its just something I have learned to accept.......
2017 Ranger Z520C
250 Evinrude ETec With Marks HP Prop
4 Garmins 7610 xsv with Live Scope
10 foot Power Poles
Dobyns Rods
You can disable this from happening by turning off the "auto power on" function.
2010 Nitro Z7
Mercury Optimax 150
Garmin 106SV(bow), 106SV(console)
Cayuta Creek Outdoors
https://www.youtube.com/channel/UCw3...UvSxaeLpzFyYHA
And you can set up stations with diff power on settings.
Risen From The Ashes!!
When networked : They come on and off together
When you turn the "auto power on" when it gets power it will turn both on , different than turning power on to one and all coming on but same result
Turning one off will always turn all off
This works with my uhd2 93sv networked to my ultras also
I have a uhd 73sv networked with these also and it powers on and off separately , the 73 is supposed to do this as per Garmin
End of story . thats the way Garmin has it set up
2000 Champion 190SX
2000 Yamaha VMAX 150
Garmin Force
106`s @ bow & console
93 SV UHD 2 @ bow
LVS 32 perspective
LVS 34 forward
Talon
This has been discussed many times. Majatk has it exactly right. When ethernet-linked, that is the expected behavior (powering on and off together), no way to disable. The Auto Power Up feature doesn't address this. With this feature On, when power is applied to the unit's power cable, it will automatically turn on (don't need to power up via the Power button on the unit).
Garmin Pro Team