What should I put on them to seal them and what is the torque on them
What should I put on them to seal them and what is the torque on them
2005 champion 196 oh what a ride
Marine silicon and real tight!
55 lb from jog plate to transom and I believe it's 90 Jack plate to motor.
To seal them use 3M 4200
1995 Champion 190 dcx Elite
Thanks
2005 champion 196 oh what a ride
Correct on the torque but any marine silicone for above/below waterline works just fine and you won't lose gel coat when you remove them.
Avoid 3M 5200. It is a strong adhesive and will be very difficult to remove in the future.
C Man turned me onto Starbrite marine silicone sealant years ago and that has always worked well for me. The 4200 is great and I really like the workability of 3M 4000 UV.
1994 201 Champ re-powered with a 250 HO G2 E250LHAFA 05438419