Results 1 to 4 of 4
  1. #1
    Member Rulebender's Avatar
    Join Date
    May 2021
    Location
    Ellington Ct
    Posts
    948

    97 Evunrude intruder fuel pump manifold part number

    Just swapped motors on my boat to a 97 evinrude intruder 150. Took it out to test the other day. It was boggy. If i pumped the bulb I could get it up on plane for a couple hundred yards then it would bog down. I suspected the fuel pump diaphram was showing its age. I temporarily hooked up a low pressure inline electric fuel pump to teat this theory. It ran great with that pump running. So I am going to replace the diaphragmaa and or whatever else if there is a standard rebuild kit.

    Anyone here familiar with this job and have part numbers and know what else needs to be changed with the diaphragm?

    E150GLEUC

    Thanks

  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    71,295
    #2
    Order the rebuild kit from www.maxrules.com or get the dual stacked pump for the 60* and premix that pump from the same site goes for about $200, it is plug and play.

  3. Member Rulebender's Avatar
    Join Date
    May 2021
    Location
    Ellington Ct
    Posts
    948
    #3
    Ty CM!

  4. Member Rulebender's Avatar
    Join Date
    May 2021
    Location
    Ellington Ct
    Posts
    948
    #4
    Running like a top now!