Dual Solix MSI+ g3 not reading 2d
Hello all
I have 2 Solix 12 g3 mega si+ on my council.
Left one has mega si+ with splitter for 2d in in hull, ethernet, nmea 2000, head sensor and power
Right one has ethernet mnea 2000 and power
Both connected to: AS ETH 5PGL - 5 PORT ETHERNET SWITCH
My question is on the right one I don't get the depth reading. Is the a setting I'm missing or do I have to connect a physical transducer to it?
Last edited by philhen; 04-10-2024 at 08:10 AM.
You have to select the left one as the source for 2D in the right one's Sonar Source menu.
The left unit should be listed and you highlight the circle in the 2D source column.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
I have selected the left one for all the sonar sources and I don't get depth reading for any of them( 2d,down,side). I get the sonar images tho
just no depth reading on data overlay
You could swap the sonar connection to the right unit and see what happens.
Also your main unit (left) should be allowed to boot fully before you start the right or bow units.
Reply With Quote