which thrust washer is this? And do I leave this one on when putting on the other thrust washer for a Mercury prop?
IMG_5966.jpeg
which thrust washer is this? And do I leave this one on when putting on the other thrust washer for a Mercury prop?
IMG_5966.jpeg
2022 Skeeter ZXR20
Yamaha 250 SHO
Looks like a Yamaha thrust washer for Yamaha rubber pressed in hubs. You need a Mercury hub kit made to fit a Yamaha motor.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Thanks Mike, that’s what I thought. What concerns me is this thrust washer was on in front of my bravo that the dealership put on. It just threw a blade last week and now I’m concerned about LU damage.
Which hub kit is the best for a Mercury prop between these two?
IMG_5964.jpeg IMG_5965.jpeg
2022 Skeeter ZXR20
Yamaha 250 SHO
I have a Bravo 1 on my FXR, it has the second hub kit you posted with the cotter pin. It also has the extra bushing
2022 Skeeter ZXR20
Yamaha 250 SHO
I have run a Bravo LT on first a 250 SHO and then 2 f300's. I've used the first kit till this winter when I switched to the second kit pictured. The only reason I switched kits was with the first kit the prop clunked in gear quite hard. Supposedly the second kit makes it more cushioned when going into gear. I have not tried it yet as it is winter here, but by a report from a member on here it is a smooth transition.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
IMG_5975.jpeg
so is the one on the right the correct one? I believe it’s the 835274Q1 washer
2022 Skeeter ZXR20
Yamaha 250 SHO
The left one looks like a flow torq hub kit thrust washer for a Mercury prop. The Yamaha motor model has an additional 1/8 in step to hold the prop farther from the gearcase. So you don't hit the zerk fitting.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
2022 Skeeter ZXR20
Yamaha 250 SHO
2022 Skeeter ZXR20
Yamaha 250 SHO
Scorpions were made with both hub styles... Rubber pressed in hub.......... and a square bore like new Merc props. I don't know what your Scorpion has.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
2022 Skeeter ZXR20
Yamaha 250 SHO
Hard to tell from this pic.... But this looks like the "ONE" Put thrust washer on the back of the prop and make sure it mates w/o much slop. Tighten it all up and spin the prop by hand and make sure it spins freely.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
2022 Skeeter ZXR20
Yamaha 250 SHO