2002 210 set up??

[blazin210]

hey guys I have a 2002 210 with a 2020 250 SHO (just installed). I'm trying to get the boat set up for the best performance I can. Here is what I have as of now.

2002 210
2020 250 SHO
10 Bobs hydraulic
28 Bravo all 8 holes 6 of the 8 holes have plugs the other have plugs with small holes.
Garmin Force TM
12 inch Garmin on front and on dash
3 50 ah lithium and one 31 group glass battery
Minnkota battery charger
48 gallons of fuel
medium load on tackle
im about 245lbs


I ran the boat with this set up and would run 5950/6000 rpm @ about 76/77 mph

This was playing with the jack plate and the trim. At no point was the rooster tail anywhere close to the top of the motor (it was hard for me to see it, it was low). this speed was trimed out and the PTP was about 2 below.

According to the calculations this is about 15/16% slip. what can i do to get this slip down?

any help would be greatly appreciated.

[bassfisher444]

Get the motor flashed to a 300 would be my first step.

[blazin210]

Get the motor flashed to a 300 would be my first step.

i really want to but still have over a year of warranty left.

[bassfisher444]

i really want to but still have over a year of warranty left.

Doesn't matter, flashing doesn't change your warranty as long as you don't go above the factory rev limit.

[Rebel1]

That's actually pretty good on a 210. Blazer/Yamaha combos usually run better with a 3 blade prop but the Bravo is hard to beat for a fishing prop.